TITAN Drop-in rack bench vs Reflex decline bench

This is a comparison between the TITAN Drop-inrack bench and Reflex decline bench including pros, cons, and alternatives. This article was originally posted in Which TITAN bench to get? Follow the links for details.

Overview and review of the Reflex Olympic decline bench

The Reflex Olympic decline bench press comes in at $1882 and is a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".

What else to consider from Rogue

Overview of the Reflex Decline bench

The Reflex decline bench provides you with a sturdy decline bench press setup for the big boys. This bench is going nowhere no matter how big the weights or athlete. You will have the bench set up steady so that you will always have the same setup. There are also safeties in place. Overall a solid piece of equipment, especially when your gym is specializing in big guys or bodybuilding. The specifications of the Reflex decline bench are:

Combination of 3×3 11ga. & 3/16-walled fully Welded Tubular steel construction.
Powder Coated finish.
Plastic lined weight bar saddles.
7 position adjustable roller pads.
Adjustable Saddles w/ 11 positions.
Weight storage.
7 position adjustable safeties.
1in high-density foam pad
145 - 450 LB
Length 62”-92”
Width 48”
Height 47”-53”

This is a good addition to your gym when you have a lot of space and many big guys or very new athletes.

Pros of the Reflex decline bench

The sheer size of this will make it a favorite for all your athletes who don’t fit into other machines. Once a transportable bench becomes too small, you probably want to graduate to this beast. Some might also appreciate that the bench will always be set up at the same distances. This is hard to achieve with a transportable version. The reflex decline also provides space for plates and is a good addition to any gym with plenty of floor space.

Cons of the Reflex decline bench

The reflex decline bench press is not very versatile. If you do a lot of circuit training and have little room, it probably won’t be the best investment. It takes up a lot of floor space and can be intimidating to some clients. If you are planning a home gym it is pretty much out of the question, unless you live in a mansion.

Alternatives to the Reflex decline bench

Alternatives to the reflex decline bench are

The reflex incline basically does the same as the decline setup, just for an incline bench setup. Again you need a lot of space in return for security.

The reflex military bench takes the incline and decline approach and uses it for the military press. Again you are taking up more space in return for being able to move bigger weights more secure.

The Rogue AB3 is a portable bench from Rogue which can be set up for incline and decline benches presses. This will probably the tool of choice for anyone who wants to build their home gym.

Summary for the Reflex decline bench

The reflex decline bench machine is probably the piece of equipment I would consider the most from reflex. The decline bench press is the one where you most need a secure setup. All other forms of bench presses I am personally happy to do with a bench and barbell in a rack. I might feel different if I did those with more than 300 pounds for repetitions.

Overview and review of the TITAN Drop-in rack bench

This is an overview of the TITAN Drop-in rack bench including pros, cons, and alternatives. This article was originally posted in Which TITAN bench to get? Follow the links for details.

Overview of the TITAN Drop-IN rack bench

Price: $159

A drop-in rack bench is a solution to a specific problem. It is an ok solution, but maybe not for everyone. If you already own a TITAN rack and want to have a competition-sized bench setup, this is the perfect fit your you. Especially if you own gym ith multiple racks you can sacrifice one instead of buying a combo rack for $999 to achieve the same goal. Another example is a home gym owner who is annoyed with their bench setup at home as it is always slightly off. For these two scenarios, the drop-in bench is a very cheap solution to this problem. Otherwise, it is a bit cumbersome. The full specifications for this bench are:

Installs directly into your power rack to provide increased stability
Comes with pins to install the bracket – or use your power rack band pegs
17-in height allows athletes to train with competition bench standards
Tough steel construction will last for years with proper use
Powder-coated paint job protects against rust and early scuffing
Bench height: 17-in
Bench pad length: 51-in
Bench pad width: 11-in
Bench pad thickness: 2 1/2-in
Connection bar width: 42”
Overall weight: 50 lbs.
Weight capacity: 1,000 lbs.

This is a solid drop-in bench that almost can't be beaten on price. If you have the problems mentioned, this is an easy and cheap fix.

Pros of the TITAN Drop-in rack bench

Pros of the TITAN Drop-in rack bench are:

Price
Consistent setup
Easy to install if you have two people

As with all TITAN products they can almost not be beaten on price. This also goes for the drop-in rack bench. If you want to save money and upgrade one of your racks to a competition bench press setup for temporary max tests, this is a great solution. Just pop the bench in for the weekend for your mock meet and you are ready to go.

With this bench, you have nor problems in terms of positioning towards the bar. Distances are the same as in competition and you will always be dead center under the bar. This makes training for competition easier as you do not have to go one inch left, right, forward, and backward each time you want to bench heavy.

If you have two people at hand, this is also an easy install. The pins provided slide in easily and the whole construction is easy to lift in and out of the rack.

Cons of the TITAN Drop-in rack bench

Cons of the TITAN Drop-in rack bench:

Hard to handle for one person
Takes up the entire rack
Can not be used on its own
Problems with the finish

If you are by yourself, this is an annoying setup. You have to put it in the right place, then put the pins in, then something will misalign and you repeat the process all over. With two people this is very easily fixed as you just give instructions to the other person holding the bench while you put the pins in. By yourself this can becomes tedious.

Once installed, the rack can not be used for squats, deadlifts, or most other exercises anymore. The structure stretches over the entire rack space and therefore makes it impossible to be used for anything else than bench press related exercises. To buy a power rack for $300-$400 and then to invest another $$150-$200 to make it less versatile is not good economics or space management. In these departments, the drop-in fails, even though it does address an easy competition bench press set up perfectly.

The drop-in also can not be safely used just on its own. You can not bolt it down and you will also have some balancing issues.

As this is a TITAN product that is retrofitted into their racks after they have been delivered it is ver likely that some things ill not align smoothly. This is one of these products that need attention to detail to work properly and provide the convenience you are buying with it. As these are all finishing related topics, TITAN might not be the best place to go for this kind of idea to buy a highly specialized product at a dumping price.

Alternatives TITAN Drop-in rack bench

Alternatives to the drop in rack bench are:

The TITAN combo rack is a good alternative to the Drop-in rack bench if you have a gym that is spacious. Here you can rather get a proper full competition setup, if your clients demand it, rather than sacrificing a rack to turn it into a bench setup on occasions. This strategy will give you more satisfied clients and less hassle changing setups around. The only downside is that a combo rack can be intimidating, especially if you have to operate by yourself.

The hefty bench is a good alternative to the drop-in rack bench for any home gym owner with a serious flat bench press. If you weigh over 120kg you might want to consider to beef up the bench you are pressing on. The same goes for anyone who benches more than 300lbs for repetitions.

The TITAN bench press rack is a good alternative for anyone who wants a very sturdy, competition bench press setup who does not want to shell out 1000 for an extra station and needs convenience. Compared to a combo rack you get the same bench press setup, but it is way easier to handle. Especially for board presses and other specific partial repetitions, the bench press rack is better than a combo rack.

Conclusion for the TITAN Drop-in rack bench

The TITAN drop-in rack bench is a good option if you occasionally do mock meets in your own professional gym with multiple members attending. In this scenario, you save yourself quite a lot of money, while still having a good bench press setup to work with. When you are not doing a competition you can remove the drop-in and make the rack more versatile. Home gym users might find this to be too cumbersome, even though the very low price is tempting. Anyone who regularly benches heavy and has space might want to consider the bench press rack instead. It costs a little more, but basically takes up the same space if not dissembled and is a lot more convenient.