Information on how to run faster, lift stronger and think deeper

TITAN Series power rack vs Rogue RM 390F [Article, Video]

Posted by Pascal Landshoeft

Jul 27, 2020 9:00:00 AM

TITAN Series power rack vs Rogue RM 390F [Article, Video]

The is a comparison between the TITAN series power rack and the Rogue RM 390F. Follow the links for more details.

Click for Instagram

Overview and review of the Rogue RM 390F Flat Foot Monster Rack

 

 

 

Price: 1.211

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster Flat Foot will save you bolting down the rack. You will have no holes in the floor with this one. See the details in this article.

Related articles

Overview of the RM 390F Flat foot

The RM390F rack is a special rack in the Rogue Line up. IT is one of two racks with the flat foot design. The flat foot design makes it possible that you do not have to drill the rack into the ground to anchor it. This makes the flat foot a very popular option in scenarios where a wood, carpet or rubber floor have already been installed and should not be damaged. 
 
The Flat Foot weighs 335LB and comes in with a width of 24''. It is 93'' high and therefore has a footprint of 54''x'50''.  The flat foot is compatible with the accessories of the Monster series. The only thing to consider is that Band pegs and safety spotter arms should not be used with the Flat Foot Monster rack. Get safety pins instead.
 

How many clients should the Rogue RM390F bring you?

If you think that the Rogue RM390F will bring you 4 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 2.400$ net new revenue against an investment of 1.211$. Adjust the numbers for your own gym accordingly.
 

Pros of the 390F Flat foot

The biggest pro of this rack is the flat foot design. This means you can install this rack anywhere where there is space. No nasty holes in the floor which need to be refilled once you want to move the rack somewhere else.
 

Cons of the 390F Flat foot

 
If you get a half rack you have to think about where to store your plates. In addition, not everyone likes to train in a half rack. IT can be a bit tight for a three-step walk out. 
 

Alternatives to the 390F Flat foot

For the same budget of 1.211$ you have the following alternatives with Rogue:
 
  • 1x RML 390F Monster Lite @795$
The Rogue RML 390F is the Monster Lite version of the flat foot design. This is a very viable option to save about 500$. You are already in the market for a solution with a small footprint for home use and small athletes. You might as well save a bit more money by going for the slightly less sturdy construction of the same product.
 
If you want a full rack that gets you close to the champions this is the rack to go for. Think of the fittest man on earth while training to set new PRs in a full rack dedicated to the greatest CrossFitter of all time.
 

Conclusion

The 390F Flat foot is a great half rack to use at home which does not need to be bolted down. With this you can train and move whenever it is convenient.

 

Further reading


 
 

Overview and review of the Titan Series power rack

The Titan Series power rack will put you back about $1000. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for over $500

Overview of the TITAN power rack

 
The Titan series power rack is the flagship rack from TITAN which is currently available. You will get an overbuild cage with a lot of space inside to play around with. If you are a massive athlete or just like big, star things, this is a good option for you. It also includes all of the its and bits and plate storage to get you started. A barbell and plates would have to be purchased separately to make a full set. The specifications of the TITAN power rack are: 
 
  • 3” x 3” 11 Gauge Tubing and bolt-together design.
  • Includes (2) 1” Diameter Pins w/ 1.5” Pipes for
  • Includes (4) Bolt-On Weight Plate Holders
  • Includes (4) Band Pegs.
  • Includes a pair (2) Sandwich J-Hooks.
  • numbered laser cut holes
  • Keyhole side spacing 
  • 1” bolts 
  • Max height of 94” for pull-up bar. 
  • Overall Weight: 388 LB
  • Overall Height: 100”
  • Footprint (including bolt-down plates): 53” x 55.5”
  • Overall Depth: 48”
  • Inside Depth: 42
  • Overall Width: 48”
  • Inside Width: 42”
 
This rack will make a fine centerpiece of your gym for years to come. 
 

Pros of the Titan power rack 

 
You will get a massive rack for a very competitive price. TITAN also offers a wide arrange of attachments to tend to all of your own or clients needs in the future. Once bolted down this thing does not move anywhere. Ideal for big guys lifting big things.
 

Cons of the TITAN power rack

 
As Titan seems to operate on lower margins than their competition you might find that the finish or welds of racks can be inconsistent. If you make less money per transaction you usually have to make up for it by cutting corners by buying different quality material from different suppliers on the cheap or pay your staff less. As we are talking racks here, this might not be as bad as with medication. However, if you get furious about little cosmetic blemishes or less than perfect craftsmanship, don’t buy from TITAN. 
 

Alternatives to the TITAN power rack 

 
Here are some alternatives to the TITAN power rack: 
 
 
The X3 is basically the same model as the Titan rack with two differences. It doesn’t have numbered holes on the uprights and the keyhole design. This means that you can use fewer attachments with it which you have not necessarily bought from Rogue. 
 
The T2 model comes in various shapes and heights and can be configured differently for your home gym to make it fit your space. The main difference to the other Titan racks is that the uprights are 2x2 instead of 2x3 or 3x3. 
 
The T3 rack model is also very similar to the Titan rack but comes at a lower cost. It is the same as the X3 except that it has 2x3 Gauge uprights instead of 3x3. 
 

Summary for the TITAN power rack

 
If you only want to buy a rack from TITAN and want the best, this is the one to go for. Also if you want to buy a lot of racks and don’t care about the finish that much, TITAN is a great option. If you are a smaller athlete and want to save money you might want to look at the other TITAN models as well, especially the X3. 
 
 

Topics: TITAN