TITAN T2 and dip vs Rogue RM6 [Article, Video]

This is a comparison between the TITAN T2 power rack and the Rogue RM6. Follow the links for more details.

Overview and review of the Rogue RM6 rack

Price: 2.000 - 2.640

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster RM6 rack will either be the pride and joy of your home gym or the impressive addition to your gym for the most ambitious lifters. See the details in this article.

What else to consider from Rogue

Overview of the Rogue RM6

The RM6 is the flagship rack of Rogue. If you buy a 24' Monster Rig in the racked configuration you basically buy multiple RM6 with pull up bars in between them. This is the rack for serious home warriors or small gyms who do not want to compromise.

The RM6 has a length of 76'' and width of 49''. You can get the rack in three different heights ranging from 90'' through 100'' to 108''. The Footprint comes in at 80'' x 53''. The new keyhole design also makes it easier for you to fit smaller attachments into the Monster series. You can choose from the following colors for the RM6:

Bright blue
Bright Green
Burnt Orange
Dark Blue
Dark Red
Gun Metal
Light Gray
Rogue Red
White
Satin Clear
Satin Black (Standard)

All of these options come in a medium gloss powder coat. Above this, you have many options to customize the top crossmembers, safeties and J Cups. The better the options you pick the higher the price. If you go for all the finest it drives the price to 2.640$. Then you have the fanciest pull-up bars, flip down safeties and J cups that money can buy from Rogue.

How many clients should the RM6 bring you?

If you think that the RM6 will bring you 7 -9 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 4.000$ - 5.400$ net new revenue against an investment of 2.000$ - 2.600$. Adjust the numbers for your own gym accordingly.

Pros of the Rogue RM6

This rack gives you a full and a half rack in one go. With this, you can train more athletes at the same time. If you do not want to train multiple athletes on the same rack, you can use the half rack for storage. Another option is to install a Rhino belt squat Drop in at the back of this rack. This can be a very powerful configuration to attract powerlifters to your gym.

Cons of the Rogue RM6

A lot of people will argue that this rack is completely overbuilt. The little sisters of the Rogue line, Echo, Infinity and Monster lite bear this reputation. You can definitely save a lot of money by going with other options. It depends on your needs. For myself, I only want the best to be the best. No one in the market argues that Rogue products are built to last, only price is a concern.

Alternatives to the Rogue RM6

Based on this budget here are some alternatives you might want to consider to the RM6:

1x RM4 1.300$ to 2.000$

If you do not know exactly how you are going to use the half rack at the back of the RM6 you are better of going with an RM4. Ask yourself whether your gym already has enough storage options for plates and whether your clients will use a half rack. Often the answer is that you already have enough storage and clients do not like to use half racks. Same goes for basement and garage gyms. You can use the saved space for something else. The only disadvantage of this option is that you can not install a Rhino belt squat in the back of the rack. You can remedy this by buying a racked Rhino version at a later stage.

1. RML-690C 1.750$ - 2.350$

The RML is the Monster Lite version of the RM6. It gives you the same space and storage options with less sturdy beams. This is more than enough for most applications. If you want to save money and still have a very sturdy rack, this is the option with extra storage and a half rack at the back.

Conclusion

The RM6 is one of the most overbuilt and yet impressive racks you can get in the market. When you get this you know that you did yourself and your clients proud. Even the biggest athletes will not be able to make this rack rattle.

Overview and review of the T2 and dip

The TITAN T2 and dip will put you back about $300 - $350. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500”

Overview of the T2 and dip

The T2 comes with 2x2 steel tubes and distinguished itself from the X2 line by having fewer extras straight out of the box. You will have fewer pull-up bars and less convenience on the uprights. The money saved for this can be put towards a bench as in this package. This version also includes a dip installment at the front. The features and specifics of this package are:

Rack details:

Capacity: 700 lbs
1" round steel j-hooks
T-2 Series (2"x2" steel tubes)
Package includes 1 pair of dip bars
Chin up bar: 1 1/4" diameter
Installation instructions
Weight: 107 lb
Height: 83"
Height of pull up bar: 80"
Opening: 44"
Depth: 48"
Inside front to back bar: 26"
Floor space: 48" x 48"
Material: Steel

The main difference to most other is the included dip bars.

Pros of the T2 dip bar

The price of the T2 is one of its main pros. You will be hard-pressed to find as much metal for a rack including a dip bar for the same price in the market. Especially if it is new.

Cons of the T2 dip bar

The dip bar can obstruct access to the rack itself. You will also not be able to use the front to have two athletes squat in parallel on the same rack. This might not be ideal, especially in high school and college setups strapped for cash.

Alternatives to the T2 dip bar

T3 fold back rack
X2 and incline combo

The T3 uses a folding concept but with 2x3 steel tubes to be stored against the wall when you don’t use it.

The X2 is one of the cheapest series in the TITAN line up. With its 2x2 steel tubes, it uses the least material to build a rack. If you want to downsize on all ends to fit a bench and rack into $500 budget comfortably, this is for you.

Summary of the T2 dip bar

If you care about a dip bar, this is the rack. Otherwise, you might as well save the money for more plates or a bench.