Information on how to run faster, lift stronger and think deeper

TITAN T3 Tall power rack vs Rogue RM6

Posted by Pascal Landshoeft

Aug 6, 2020 9:00:00 AM

TITAN T3 Tall power rack vs Rogue RM6

This is a comparison of the TITAN T3 power rack and the Rogue RM6. Follow the links for more details.

Click for Instagram

Overview and review of the Rogue RM6 rack

Price: 2.000 - 2.640

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster RM6 rack will either be the pride and joy of your home gym or the impressive addition to your gym for the most ambitious lifters. See the details in this article.

What else to consider from Rogue

 

Overview of the Rogue RM6

 
The RM6 is the flagship rack of Rogue. If you buy a 24' Monster Rig in the racked configuration you basically buy multiple RM6 with pull up bars in between them. This is the rack for serious home warriors or small gyms who do not want to compromise. 
 
The RM6 has a length of 76'' and width of 49''. You can get the rack in three different heights ranging from 90'' through 100'' to 108''. The Footprint comes in at 80'' x 53''.  The new keyhole design also makes it easier for you to fit smaller attachments into the Monster series. You can choose from the following colors for the RM6:
 
  • Bright blue
  • Bright Green
  • Burnt Orange
  • Dark Blue
  • Dark Red
  • Gun Metal
  • Light Gray
  • Rogue Red
  • White
  • Satin Clear
  • Satin Black (Standard)
 
All of these options come in a medium gloss powder coat. Above this, you have many options to customize the top crossmembers, safeties and J Cups. The better the options you pick the higher the price. If you go for all the finest it drives the price to 2.640$. Then you have the fanciest pull-up bars, flip down safeties and J cups that money can buy from Rogue. 
 

How many clients should the RM6 bring you?


If you think that the RM6 will bring you 7 -9 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 4.000$ - 5.400$ net new revenue against an investment of 2.000$ - 2.600$. Adjust the numbers for your own gym accordingly.
 

Pros of the Rogue RM6

 
This rack gives you a full and a half rack in one go. With this, you can train more athletes at the same time. If you do not want to train multiple athletes on the same rack, you can use the half rack for storage. Another option is to install a Rhino belt squat Drop in at the back of this rack. This can be a very powerful configuration to attract powerlifters to your gym. 
 

Cons of the Rogue RM6

 
A lot of people will argue that this rack is completely overbuilt. The little sisters of the Rogue line, Echo, Infinity and Monster lite bear this reputation. You can definitely save a lot of money by going with other options. It depends on your needs. For myself, I only want the best to be the best. No one in the market argues that Rogue products are built to last, only price is a concern. 
 

Alternatives to the Rogue RM6

 
Based on this budget here are some alternatives you might want to consider to the RM6:
 
  • 1x RM4 1.300$ to 2.000$
 
If you do not know exactly how you are going to use the half rack at the back of the RM6 you are better of going with an RM4. Ask yourself whether your gym already has enough storage options for plates and whether your clients will use a half rack. Often the answer is that you already have enough storage and clients do not like to use half racks. Same goes for basement and garage gyms. You can use the saved space for something else. The only disadvantage of this option is that you can not install a Rhino belt squat in the back of the rack. You can remedy this by buying a racked Rhino version at a later stage.
 
The RML is the Monster Lite version of the RM6. It gives you the same space and storage options with less sturdy beams. This is more than enough for most applications. If you want to save money and still have a very sturdy rack, this is the option with extra storage and a half rack at the back.
 

Conclusion

The RM6 is one of the most overbuilt and yet impressive racks you can get in the market. When you get this you know that you did yourself and your clients proud. Even the biggest athletes will not be able to make this rack rattle.

Further reading

Overview and review of the T - 3 Tall power rack $539

The T3 tall power rack will put you back about $500. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for over $500

Overview of the T3 power rack 

 
The Titan T3 comes with 2x3 steel tubes instead of the other racks from TITAN which are available as 3x3 and 2x2. You can also get the T3 as combos with a pulley or a bench depending on your needs. With the 2x3 beams, you get a good solution for your home gym and wide range of attachments which are available from Titan. The price is usually around $500 - $600 depending on the time of year and Discounts applicable. With the T3 you have the following options for your rack 
 
 
 
Short 24" Deep Power Rack
  • Weight: 230 LB 
  • Height: 82 1/4" 
  • Height of pull up bar: 77" 
  • Outside width: 53 1/4"
  • Inside width: 42 1/8"
  • Outside depth: 32 3/4
  • Inside depth: 24"
  • Floor space: 12.11 square feet
  • Rackable Capacity: 1,100 LB
  • Whole Rack Capacity: 4,400 LB
Tall 24" Deep Power Rack 
  • Weight: 281 LB
  • Height: 91 1/8"
  • Height of Pull Up Bar: 89"
  • Inside Width: 42 1/8"
  • Outside Width: 53 1/4"
  • Inside Depth: 24"
  • Outside Depth: 32 3/4"
  • Floor Space: 12.11 square feet
  • Rackable Capacity: 1,100 LB
  • Whole Rack Capacity: 4,400 LB
  • Material: Steel
Short 36" Deep Power Rack
  • Weight: 254 LB
  • Height: 82 1/4"
  • Height of pull up bar: 77"
  • Outside width: 53 1/4"
  • Inside width: 42 1/8"
  • Outside depth: 44 3/4
  • Inside depth: 36"
  • Floor space: 12.11 square feet
  • Rackable Capacity: 1,100 LB
  • Whole Rack Capacity: 4,400 LB
 
Tall 36" Deep Power Rack
  • Weight: 281 LB
  • Height: 91 1/8"
  • Height of Pull Up Bar: 89"
  • Inside Width: 42 1/8"
  • Outside Width: 53 1/4"
  • Inside Depth: 36"
  • Outside Depth: 44 3/4"
  • Floor Space: 16.7 square feet
  • Rackable Capacity: 1,100 LB
  • Whole Rack Capacity: 4,400 LB
  • Material: Steel
 
With this, you have many options to think about how to integrate your future T3 into your home gym.
 

Pros of the T3 



A definitive pro for all TITAN products is their price compared to comparable alternatives in the market. You usually pay about half of what you might pay with others. To sweeten the deal shipping is also free with TITAN in the US. THis makes the T3 a very good option if you are on a tight budget or need to buy anything in bulk. You can also choose from multiple colors.
 

Cons of the T3 

 
Who wants to compromise if you are already buying from a vendor known for its low prices. You might as well upgrade to the 3x3 versions. If you are in Europe you want to closely watch the shipping prices as they might even exceed the price of the rack. 
 

Alternatives to the T3 

 
 
The TITAN rack is the top of the crop rack from TITAN. It has 3x3 uprights and 1” bolts. This is the heaviest and sturdiest rack you can get from TITAN. Compared to market prices it is also very affordable.
 
The X3 is basically the same model as the Titan rack with two differences. It doesn’t have numbered holes on the uprights and the keyhole design. This means that you can use fewer attachments with it which you have not necessarily bought from Rogue. 
 
The T2 model comes in various shapes and heights and can be configured differently for your home gym to make it fit your space. The main difference to the other Titan racks is that the uprights are 2x2 instead of 2x3 or 3x3. 
 
 

Summary for the T3

 
The T3 is a Great middle of the portfolio option to train for athletes of most sizes. If you are an elite lifter or very big you might want to upgrade. 
 
 

Topics: TITAN