TITAN Strongman Log bar vs Rogue C70 bar [Article, Video]
This is a comparison of the TITAN Strongman log bar and the Rogue C70 bar. Follow the links for more details.
Overview and review of the Rogue C 70 Bar
This is an overview of the Rogue C70 bar which is a short barbell for lower cost and easier storage. This article was originally published in "Which Rogue barbell to buy".
Price 265$
Overview
The rogue C70 is a short version of the Ohio bar. The main difference is that the loadable sleeve length is 12.00 instead of 16.40. This makes it a great bar if you want to get a lot of CrossFitters in the same space or if your basement gym has very limited space. The length makes it impossible to rack the bar in regular racks and squat stands.
The C70 bar weighs 35lb and has a diameter of 28.5mm. It withstands 190K PSI Tensile strength. The sleeves are attached to the shaft with bushing. The available coating is Black Zinc.
This is a very specialised bar. Only consider getting it if you face this exact problem, not being able to get enough Crossfitters into one space, which is a very special challenge to have.
Overview and review of the Strongman Log bar
The Titan Strongman Log bar will put you back about $150. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which barbell to get from TITAN”.
Overview of the Strongman log bar
The
Strongman log bar is a staple of Strongman Training. The pinnacle of this lifting practice is the Austrian oak competitions at the Arnold. This exercise will challenge your balance and all body strength. The
log also loads competition plates, which often can be a problem with these bars. The features and specifications of the
log bar are:
TITAN log bar details:
-
Now fits Competition Plates,
-
welded end caps
-
1.65" knurled handles
-
Neutral hand grips at 26" on center.
-
Fully welded seams for great fit and finish.
-
14.25" loadable sleeves
-
Weight: 75 LB
-
Overall length: 75.5"
-
Sleeve diameter: 1.9"
-
Log diameter: 10"
-
Loadable sleeve length: 14.25"
Good tool to press big weights overhead.
Pros of the log bar
The neutral grip position puts less stress on your wrists for the bench press and the overhead press. It will also teach you better to deal with cumbersome objects to lift them up. The price is also attractive compared to barbells and other competitors.
Cons of the log bar
A
log bar can be quite intimidating for beginners as they are heavier and harder to handle than a barbell. They can sometimes be a pain to fit the plates you already have in your gym. As this piece of equipment has a lot of welding to be done and TITAN is known to cut not so the best job on these you might want to opt for a piece of equipment which needs less welding or is from a different vendor.
Alternatives to the log bar
The
Atlas bar is TITAN’s all-purpose bar at a reasonable price. There are no welds on this bar which eliminates the risk of getting poor quality. It will also not be as intimidating for beginners as a
log bar.
If you still want a log bar you can invest a little more and go for the
Rogue Log bar. You will pay more but there are usually no complaints on the Rogue finish.
The
hex bar from TITAN is an option too. This will enable you to do deadlifts in a safe and practice farmers walks for a better grip and the carriers which are a part of Strongman competitions.
Summary of the log bar
A good budget option, but you might want to look somewhere else because of the many welds.