REP fitness OMNI rack vs TITAN T2 tough gym
This is a comparison between the Rep Fitness OMNI rack and the TITAN T2 tough gym. Follow the links for more details.
Overview and review of the T2 Titan Tough Gym $788 - $2898
The Titan T2 tough gym will put you back about $800 - $3000. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for over $500”.
Overview of the T2 Home gym
The
T2 Titan Tough Gym has the
T2 TITAN rack at the heart of the setup. The pricing page has been designed to make it easier for you to order a complete home gym from one place, rather than having to add multiple items across the webshop yourself. With its 2x2 uprights, it is the smallest and therefore most affordable rack from TITAN.
The T2 comes in multiple variations and can be extended at a later stage if your needs grow. Here is what you will get specific with the
T2:
Short version
-
Capacity: 800 lbs
-
1" round steel j-hooks
-
T-2 Series (2"x2" steel tubes)
-
Chin up bar: 1 1/4" diameter
-
Includes J-Hooks
-
Weight: 132 lbs
-
Height: 71.5"
-
Height of pull up bar: 68.5"
-
Opening: 44"
-
Depth: 45"
-
Inside front to back bar: 26"
-
Floor space: 48" x 58"
-
Material: Steel
Tall version
You can opt for one of the two versions with little difference in price. Just make sure that they actually fit your ceiling height. If you are planning a basement gym, always go for the smaller rack to avoid any problems, unless you live in a mansion.
If you get a rack I would always recommend getting a pull-up bar with it. It is not that much extra but helps with your routines.
If you want to store your plates on the rack themselves, get some additional holders. Otherwise, find a separate unit to store your plates.
The
blues city and
bombshell barbells are Titans cerakote bars. Cerakote coating is a special way of treating metal so that designs can be applied. It is also less like to corrode and was originally developed in the weapons industry. The only downside is that it is more likely to scratch when it touches metal. So if you do a lot of work of the pins instead of the j cups maybe get another coating.
The
86” bar is a no-nonsense bar for 1500 lbs load. It comes with a tensile strength of 190.000. The material is steel with a chrome finish.
An Olympic technique bar might be of interest to you if you have many beginners in your gym or children at home. This is a lighter barbell to focus on technique and explosiveness for the Olympic lifts. For advanced athletes technique plates with a normal barbell are usually preferred.
The
atlas bar is the bread and butter barbell from Titan. A solid 20kg barbell for all purposes.
Pros of the T2 Titan
If you are on a very, very tight budget but still want to have a rack, this is the one to get. This is probably one of the cheapest racks you can get that isn’t welded by your dad or straight down dangerous.
Cons of the Titan T2
People who like to lift heavy usually like big things and the best stuff, unless they are teenagers and don’t have a job to pay for it.
The T2 does not necessarily meet this criteria. It is the rack with the smallest amount of options in the TITAN portfolio for attachments. It is also a rack that does not follow the trend of ever bigger racks in the marketplace.
Alternatives to the T2
Alternatives to the
T2 are
The
TITAN rack is the top of the crop rack from TITAN. It has 3x3 uprights and 1” bolts. This is the heaviest and sturdiest rack you can get from TITAN. Compared to market prices it is also very affordable.
The X3 is basically the same model as the
Titan rack with two differences. It doesn’t have numbered holes on the uprights and the keyhole design. This means that you can use fewer attachments with it which you have not necessarily bought from Rogue.
Summary for the T2
The T2 Titan is one of the lowest cost racks from Titan which can make it a good option for a home gym on a budget. Personally I prefer the lower cost options for outfitting facilities. I would rather get down waiting times and get more clients than provide them with the best rack possible if I work of a certain limited budget. For a home gym, as costs do not multiply by unit, I usually like to spend more on core items like the rack, barbell, and bench. Plates are something you can pinch the pennies on.
Overview and review of the REP fitness OMNI rack
This is an overview of the REP fitness OMNI rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.
Related articles
Overview of the REP OMNI Rack $934
The
Rep OMNI rack is a flat foot version of the
REP PR-5000 series which has gained quite some popularity recently. It is a solid rack from a vendor who imports their parts rather than making them in the US as Sorinex and Rogue Fitness would. The main difference to the
PR-5000 is the flat foot base and the numbering on the uprights. The full specifications of this rack are:
-
3x3 11-Gauge Steel with 1” diameter holes on upright.
-
Compatible with most 5000 Series attachments including the Lat/Low Row.
-
Up to 15 potential configurations when paired with the Omni Plus.
-
J-cup, color options, and attachments are fully customizable.
-
A long, flat-footed base helps promote stability, no need to bolt the rack down.
-
Large stainless steel logo plate for additional rigidity and lateral stability.
-
Includes: Multi-grip pull-up bar, six-band pegs, and hardware to connect up to six uprights to the base.
-
Enough hardware will be provided for all possible configurations, which means that extra hardware may be left over after the build.
-
Lat attachment adds 23" depth to the 4-post half-rack or adds 5" depth to the 6-post power rack is mounted to the interior uprights.
This is a good option when you do not want to bolt down your rack and start with a half rack that you will later upgrade. If you are looking for the most space-efficient option in the market it is probably not the best rack you can get.
Pros of the REP OMNI Rack
The main point about this rack is the flat foot design which means that you do not need to bolt it to the ground to make it stable. The bottom has quite some weight to it and a bigger footprint than a regular 4 post-half-rack would have. This is great to keep it from tipping over when you only have four posts and want to work with banded resistance on the deadlift, bench press, and squat.
As REP imports their material they can get away with lower costs for racks that compare in quality to the market leader Rogue Fitness. This means you get a similar quality rack for a lower price. This is one of the most appealing aspects of the REP fitness as they generally seem to do a better job on quality control than TITAN fitness but use overseas to keep costs down.
This is probably the best rack from REP fitness you can get, if you do not want to bolt down your rack but have big plans for it in the future. You will basically get a
PR-5000 with a flat foot design and can add to the base to your heart's contempt with further uprights.
Cons of the REP OMNI Rack
-
Space requirements
-
Numbering on uprights
-
Website ordering system
The flat foot base of the
OMNI rack is laid out to accommodate a six-post design. While this makes it one of the few flat foot designs in the market for a six-post rack, it eats up too much space in a home gym with limited space. If you want to optimize for space a folding rack or a regular half-rack are the better options.
The numbering on the uprights does not go through every hole. While this saves cost in production it is a little inconsequential for ease of use. Either have no numbers to maximize my savings or number all holes to maximize the ease of use. This is especially true if you are buying in a commercial setting rather than a home gym.
Ordering an
OMNI rack is a little tricky and I wouldn't recommend it for first-time rack buyers. With these modular systems, it is better to really have an idea of the dimensions and accessories you are buying before configuring it. Compared to their main competitor rogue the configuration system on the website is also not as easy to use. But that is just my personal taste.
Alternatives to the REP OMNI Rack
This selection of racks is based in 3x3 11 Gauge steel uprights to avoid presenting too many options to you. If you want to save more money you can also look into 2x3 Gauge uprights. The smaller you are and the lighter the weights you move, the more likely it is that you should try to save some money for your home gym by going with a smaller frame. Commercial buyers should go as big as they possibly can on their budget based on insurance questions and that you can not predict as well who will use your equipment.
If you stick with the idea of "I want a Rogue quality rack at the lowest possible price" then the
REP-PR 5000 and the
REP PR-4100 are two other options to consider. The
REP PR-5000 has been hailed as one of the best, if not the best, rack for home gym users based on its good value for money. You can configure it as a 4 post or 6 post rack. The main difference to the
OMNI rack is that it does not come with a flat foot design. The
REP PR-4100 would be the folding rack option from REP Fitness. This is a good way to go if you still want to park your car in your garage when you are not training.
If you are toying with the idea of a flat foot 6 post rack the
OMNI rack is one of the few, if not the only option out there. Another option would be the
RM6 rack from Rogue which needs to be bolted to the ground. Go with the
RM6 if you are planning to get a belt squat, as currently, the Rhino Drop-in is the superior option to the belt squats from REP Fitness. The
Rogue RM3 is the half rack option from Rogue with 3x3 Gauge steel. If you have the budget for an
Omni rack you can probably also afford the
RM3. With the
RM3 you are saving footprint compared to the
OMNI rack, as it comes with four uprights without a flat foot design. The uprights will also have all the holes numbered instead of just a few on the
OMNI rack. With this rack, you will be buying from the current market leader in home gym equipment in terms of quality and units sold. Rogue also goes to lengths to make sure that their product is as American as possible by sourcing metal and staff locally and keeping production lines in Ohio. This comes at a higher price than their competitors to the consumer. The
Rogue RM3W is the folding variation of the
RM3. If you want the best and can afford it and you are not that much into the flat foot idea, this can be a good route to explore.
The
TITAN series rack is the flagship of the TITAN rack lineup. This is TITAN's go at being like Rogue Fitness. You will also get a 3x3 11 Gauge steel uprights setting, but this is a full rack, rather than a half rack. If you were toying with the idea of a full rack that does not need to be bolted to the ground, then this might be the right option for you. If you want a 3x3 folding rack then the X-3 from TITAN would be the right choice. TITAN is known to undercut most of the other vendors on the market considerably when you compare like for like. This is why I am presenting you with their top-line rack as an alternative to the
OMNI rack. The downside of TITAN is that the same to have the most incidents with quality issues between Rogue, REP Fitness, and TITAN fitness. This makes sense as you need to cut some corners to undercut everyone else in the market. If you don't mind a potential risk of minor blemishes, some inconsistency in paint, or on the drilling of the holes, then TITAN is right for you. A good option for the DIY enthusiast who wants to save money for a new drill to fix their rack setup and then have it for other home projects.
Conclusion for the REP OMNI Rack
The
REP OMNI rack is in my opinion the REP fitness approach to tailoring their portfolio to universities. This is the right rack for the strength coach that does not want to explain to the dean why he has to drill holes into the resurfaced gym floor that was paid out of taxpayer's money. The same goes for someone who is renting a mansion and wants to put a six-post rack into it without damaging the 100-year-old original floor. For anyone who can drill into the floor or just uses a rack without bolting it to the ground, I think it is not the ideal option. Why create an unnecessary unused footprint in your limited home gym space for a half-rack?