Run Faster, Lift stronger, Think deeper

REP fitness PR-1000 rack vs PR-1100 rack

Written by Pascal Landshoeft | May 31, 2021 4:00:00 PM

REP fitness PR-1000 rack vs PR-1100 rack

This is a comparison between the REP fitness PR-4100 rack and the REP fitness PR-1100 rack. Follow the links for more details.

Overview and review of the REP fitness PR-1100 rack

This is an overview of the REP fitness PR-1100 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Related articles

 

 

Overview of the REP PR 1100 Rack $269

 
The REP PR-1100 gives you a choice of color for your low budget rack and a multi grip pull up bar. Unfortunately it strips the 1000er series of the plate storage at the back which makes it my least favorite rack out of the 1000er line. Some of the specifications are:
 
  • Height Adjustable Multi-Grip Pullup Arch
  • Laser Engraved Numbered Uprights
  • Plastic-Lined J-cups
  • Extended Safeties
 
A solid rack if you want a multi-grip bar and a rack for $300. Otherwise I personally would go for the PR-1000.
 

Pros of the REP PR 1100 Rack

 
The pros of the REP PR-1100 are:
 
  • Choice of color
  • Multi Grip bar
 
The main distinguishing parts to the other 1000er racks are the choice of color and the multi grip bar. If that is what you want, go for the 1100. Otherwise i think that the PR-1000 is the better package because of the plate storage at the back.
 

Cons of the REP PR 1100 Rack

 
Cons of the REP PR-1100 are:
 
  • No included plate storage
  • 700lbs capacity
  • Imported
 
The PR-1100 has no included plate storage in the base configuration, which in my opinion makes it inferior to the 1000 and 1050 for the low budget market it is addressing.
 
With 700 lbs capacity this is not a rack for big guys who move a lot of weight regularly on awkward bar paths. If you are a seasoned strength athlete this rack is too small and flimsy and you are better off with the PR-4000 or PR-5000.
 
The last con is that this rack is imported from China. If you don’t care, you don’t, but if local production is important to you then REP fitness needs to be ruled out and you need to go with Rogue Fitness or Sorinex.
 

Alternatives to the REP PR 1100 Rack

 
 
I personally think that the PR-1000 is the better option for the same price as you will need plate storage more than a multi-grip pull up bar. That is just based on my personal experiences where flooring and storage is usually being underrated when building a home gym.
 
The Rogue HR2 is a solid option for a half rack from Rogue under $1000. If you want a locally produced US alternative to the REP 1000er series which is beefier than the HR2 is a great choice.
 
The TITAN T2 Series is one of the lowest cost racks Form the lowest cost vendor in the market. If you want to go as cheap as possible for your rack TITAN is a good address. TITAN comes with a higher risk of quality issues than the other vendors mentioned in this article.
 

Conclusion for the REP PR 1100 Rack

 
The REP 1100 rack is great if you are looking for a rack with a multi-grip bar out of the box. Otherwise, I think the other 1000 racks are a better choice for your hard-earned cash.

Overview and review of the REP fitness PR-1000 rack

This is an overview of the REP fitness PR-1000 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.


 
 

Overview of the REP PR-1000 Rack $289

 
The REP PR-1000 is a clever rack design for a relatively small price. It comes with two pull-up bars and what I like most about it, two plate storage posts at the back to weigh it down. This rack is a great choice if you want everything in a box without forgetting everything. If you have a teenager at home who wants to lift and you are not sure what to get, this is a great option. Some of the specifications are:
 
  • 83"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
  • 26" depth inside to inside, 44" wide inside to inside
  • 2x2" steel
  • Plastic lined j-cups to protect bar knurl
  • 2" hole spacing throughout the working area
  • 1.25" and 2" Pull up bars
  • Numbered uprights every 5th hole
  • Extra bar holders on the front of safeties, great for pressing outside the rack
  • 2 Weight horns on rear base for storage and added stability
  • 700lb weight capacity
  • 400lb pull up bar capacity
  • 400lb dip attachment capacity (dip attachment is an optional upgrade)
 
Solid all in one rack out of the box at a very decent price.
 

Pros of the REP PR-1000 Rack

 
The pros of the REP PR-1000 rack are:
 
  • All in one design
  • Integrated weight storage posts
  • Flat foot design
  • Numbered uprights
 
For $300 you can not complain about what you are getting with the REP PR-1000. Out of the box you are covered with safeties, plate storage, a flat foot design, and numbered posts. For a rack in this price range, this is almost impossible to beat. Sometimes safeties cost up to $100 by themselves. Then we have not even started on storage options. The PR-1000 is a great rack for the beginner and occasional lifter.
 

Cons of the REP PR-1000 Rack

 
Cons of the REP-PR-1000 are:
 
  • Not ideal for the west side method
  • 700lb max
  • Not a lot of attachments
 
This rack does not weigh a lot and the steel frame is thinner and smaller compared to the PR-5000 and PR-4000. This makes it not an ideal rack for heavy users who put their rack through a lot of abuse. If you regularly train with more than 400lbs on the bar, use band, and chains, and do kipping pull-ups like there is no tomorrow then this is not the rack for you. If you also see your rack as an I vestment for the future and would like to make it grow you are possibly better off with a PR-4000.
 

Alternatives to the REP PR-1000 Rack

 
 
The PR-1050 is a short version of the PR-1000 to fit I to spaces with lower ceilings. If you want to fit a rack into an attic or basement the 1050 might be a better option than the PR-1000. The REP PR-1100 gives you a multi-grip pull-up bar instead of plate storage and a choice of color.
 
The Rogue HR2 half rack is the most popular Rogue rack on marathon-Crossfit.com with the most viewers out of the Rogue portfolio. This rack is Rogue’s sweet spot for value for money as it combines a half rack design with their monster lite series. The biggest bonus with this rack is the plate storage you get at the back of the rack. Whether this justifies a starting price of $600 compared to $300 of the PR-1000 I leave for you to decide.
 
The TITAN T2 rack is the lower price rack range of TITAN fitness who are themselves a price leader in the home gym market. If you want to get as much metal with holes as cheap as possible without worrying about getting ripped off on eBay, Amazon, or Craigslist than TITAN is the place to go.
 

Conclusion for the REP PR-1000 Rack

 
The REP fitness PR-1000 is a series contender if you are considering a home gym but don’t know yet whether you are fully committing. It will be relatively easy on your purse and you won’t make a mistake in the configuration and forget an annoying detail. I wish I had known about this rack when I got my first rack when I was a teenager. My mother shelled out 400 bucks on what was basically a bench with uprights. This would have been a lot better.
 
View full post