REP fitness PR-1000 rack vs TITAN X3 half rack
This is a comparison between the Rep Fitness PR-1000 rack and the TITAN X3 half rack. Follow the links for more details.
Overview and review of the X3 half rack
The TITAN X3 half rack will put you back about $550. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500”
Related articles
Overview of the X3 half rack
The
X3 half-rack gives you the safety of a power rack while optimizing for floor space. You can even store your plates on it if you want to. The 3x3 steel tubes of this rack also provide Westside hole spacing which allows for smaller increments on your bench press setup. If this is the rack for you it comes with the following features and specs:
-
3" x 3" 11 gauge steel uprights.
-
Westside hole pattern through bench zone.
-
2" hole spacing above and below.
-
1,000 + lbs. capacity.
-
Pair of UHMW lined X-3 J-Hooks included.
-
Double-sided gusset plates.
-
Overall height: 92"
-
Overall width: 49"
-
Overall depth: 48"
-
Product Weight: 250 LB
-
Finish: Black Powder Coating
-
Floor Space: 16.3 sq ft (49" x 48")
-
Rack depth: 17"
-
Front upright height: 92"
-
Rear upright height: 72"
This is a great option for college dorms or small spaces at home. It can also be used to have high quality in a gym while saving a little in overall floor space for a line of racks.
Pros of the X3 half rack
As with most of the TITAN line up first and furthermost the price for what you are getting. Apart from that, a half rack can be a great space saver whilst still functioning as a full rack. Especially the possibility to store your plates on the second set off uprights might make it superior to a
squat stand.
Cons of the X3 half rack
Squatting inside the rack might leave you constrained. Especially if you are very tall and big. Small athletes will have no problems, but if you are the next Eddie Hall or generally like a bit of space to do your exercises, go for a full rack like the T3 instead.
Alternatives to the X3
These are other options for the X3 half-rack:
If you already have a bench or just don’t need one you can invest just a little extra and get a colored rack.
Another way to go is to save on the color to have more budget for different size options on the
T3 and maybe even adding some plate holders. The
T3 is available in a short and tall version to adjust the height. For depth, you can choose between 24” and 36”.
If you want to stay within budget but start your gym with 3x3 tubing you can go for the
X3 squat stand. This is a good option for big and/or experienced lifters who prefer the freedom and flexibility of a
squat stand, yet still, move big weights. I recommend that you have enough space and experience on how to drop weights from a squat position if you opt for a
squat stand. Spotter arms are nice with a
stand but usually useless. You either miss them on a hardcore drop or the entire unit comes down because you didn’t bolt it to the ground.
The
T3 folding rack saves you about $200 on the T3 and can be installed in your garage. If you only train on the weekends or two days a week, this is a good option so that you can still use the garage or basement for your car/ miscellaneous rubbish you think is important ( I have that stuff in my attic). The savings can be put towards a barbell like the blues city or Atlas bar.
Summary for the X3 Half rack
If you are ok with squatting outside the rack and still want 3x3 uprights and are storage this is a great option for you. If you have Eddie Hall’s size, stay away from this as you will constantly bang off the uprights of you are squatting inside your rack. This injury risk is not worth the savings compared to a
T3.
Overview and review of the REP fitness PR-1000 rack
This is an overview of the REP fitness PR-1000 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.
Related articles
Overview of the REP PR-1000 Rack $289
The
REP PR-1000 is a clever rack design for a relatively small price. It comes with two pull-up bars and what I like most about it, two plate storage posts at the back to weigh it down. This rack is a great choice if you want everything in a box without forgetting everything. If you have a teenager at home who wants to lift and you are not sure what to get, this is a great option. Some of the specifications are:
-
83"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
-
26" depth inside to inside, 44" wide inside to inside
-
2x2" steel
-
Plastic lined j-cups to protect bar knurl
-
2" hole spacing throughout the working area
-
1.25" and 2" Pull up bars
-
Numbered uprights every 5th hole
-
Extra bar holders on the front of safeties, great for pressing outside the rack
-
2 Weight horns on rear base for storage and added stability
-
700lb weight capacity
-
400lb pull up bar capacity
-
400lb dip attachment capacity (dip attachment is an optional upgrade)
Solid all in one rack out of the box at a very decent price.
Pros of the REP PR-1000 Rack
For $300 you can not complain about what you are getting with the
REP PR-1000. Out of the box you are covered with safeties, plate storage, a flat foot design, and numbered posts. For a rack in this price range, this is almost impossible to beat. Sometimes safeties cost up to $100 by themselves. Then we have not even started on storage options. The
PR-1000 is a great rack for the beginner and occasional lifter.
Cons of the REP PR-1000 Rack
This rack does not weigh a lot and the steel frame is thinner and smaller compared to the
PR-5000 and
PR-4000. This makes it not an ideal rack for heavy users who put their rack through a lot of abuse. If you regularly train with more than 400lbs on the bar, use band, and chains, and do kipping pull-ups like there is no tomorrow then this is not the rack for you. If you also see your rack as an I vestment for the future and would like to make it grow you are possibly better off with a
PR-4000.
Alternatives to the REP PR-1000 Rack
The
PR-1050 is a short version of the
PR-1000 to fit I to spaces with lower ceilings. If you want to fit a rack into an attic or basement the
1050 might be a better option than the
PR-1000. The
REP PR-1100 gives you a multi-grip pull-up bar instead of plate storage and a choice of color.
The
Rogue HR2 half rack is the most popular Rogue rack on
marathon-Crossfit.com with the most viewers out of the Rogue portfolio. This rack is Rogue’s sweet spot for value for money as it combines a half rack design with their monster lite series. The biggest bonus with this rack is the plate storage you get at the back of the rack. Whether this justifies a starting price of $600 compared to $300 of the
PR-1000 I leave for you to decide.
The
TITAN T2 rack is the lower price rack range of TITAN fitness who are themselves a price leader in the home gym market. If you want to get as much metal with holes as cheap as possible without worrying about getting ripped off on eBay, Amazon, or Craigslist than TITAN is the place to go.
Conclusion for the REP PR-1000 Rack
The
REP fitness PR-1000 is a series contender if you are considering a home gym but don’t know yet whether you are fully committing. It will be relatively easy on your purse and you won’t make a mistake in the configuration and forget an annoying detail. I wish I had known about this rack when I got my first rack when I was a teenager. My mother shelled out 400 bucks on what was basically a bench with uprights. This would have been a lot better.