REP fitness PR-1050 rack vs TITAN T2 tough gym
This is a comparison between the Rep Fitness PR-1050 rack and the TITAN T2 tough gym. Follow the links for more details.
Overview and review of the T2 Titan Tough Gym $788 - $2898
The Titan T2 tough gym will put you back about $800 - $3000. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for over $500”.
Overview of the T2 Home gym
The
T2 Titan Tough Gym has the
T2 TITAN rack at the heart of the setup. The pricing page has been designed to make it easier for you to order a complete home gym from one place, rather than having to add multiple items across the webshop yourself. With its 2x2 uprights, it is the smallest and therefore most affordable rack from TITAN.
The T2 comes in multiple variations and can be extended at a later stage if your needs grow. Here is what you will get specific with the
T2:
Short version
-
Capacity: 800 lbs
-
1" round steel j-hooks
-
T-2 Series (2"x2" steel tubes)
-
Chin up bar: 1 1/4" diameter
-
Includes J-Hooks
-
Weight: 132 lbs
-
Height: 71.5"
-
Height of pull up bar: 68.5"
-
Opening: 44"
-
Depth: 45"
-
Inside front to back bar: 26"
-
Floor space: 48" x 58"
-
Material: Steel
Tall version
You can opt for one of the two versions with little difference in price. Just make sure that they actually fit your ceiling height. If you are planning a basement gym, always go for the smaller rack to avoid any problems, unless you live in a mansion.
If you get a rack I would always recommend getting a pull-up bar with it. It is not that much extra but helps with your routines.
If you want to store your plates on the rack themselves, get some additional holders. Otherwise, find a separate unit to store your plates.
The
blues city and
bombshell barbells are Titans cerakote bars. Cerakote coating is a special way of treating metal so that designs can be applied. It is also less like to corrode and was originally developed in the weapons industry. The only downside is that it is more likely to scratch when it touches metal. So if you do a lot of work of the pins instead of the j cups maybe get another coating.
The
86” bar is a no-nonsense bar for 1500 lbs load. It comes with a tensile strength of 190.000. The material is steel with a chrome finish.
An Olympic technique bar might be of interest to you if you have many beginners in your gym or children at home. This is a lighter barbell to focus on technique and explosiveness for the Olympic lifts. For advanced athletes technique plates with a normal barbell are usually preferred.
The
atlas bar is the bread and butter barbell from Titan. A solid 20kg barbell for all purposes.
Pros of the T2 Titan
If you are on a very, very tight budget but still want to have a rack, this is the one to get. This is probably one of the cheapest racks you can get that isn’t welded by your dad or straight down dangerous.
Cons of the Titan T2
People who like to lift heavy usually like big things and the best stuff, unless they are teenagers and don’t have a job to pay for it.
The T2 does not necessarily meet this criteria. It is the rack with the smallest amount of options in the TITAN portfolio for attachments. It is also a rack that does not follow the trend of ever bigger racks in the marketplace.
Alternatives to the T2
Alternatives to the
T2 are
The
TITAN rack is the top of the crop rack from TITAN. It has 3x3 uprights and 1” bolts. This is the heaviest and sturdiest rack you can get from TITAN. Compared to market prices it is also very affordable.
The X3 is basically the same model as the
Titan rack with two differences. It doesn’t have numbered holes on the uprights and the keyhole design. This means that you can use fewer attachments with it which you have not necessarily bought from Rogue.
Summary for the T2
The T2 Titan is one of the lowest cost racks from Titan which can make it a good option for a home gym on a budget. Personally I prefer the lower cost options for outfitting facilities. I would rather get down waiting times and get more clients than provide them with the best rack possible if I work of a certain limited budget. For a home gym, as costs do not multiply by unit, I usually like to spend more on core items like the rack, barbell, and bench. Plates are something you can pinch the pennies on.
Overview and review of the REP fitness PR-1050 rack
This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.
Related articles
Overview of the REP PR-1050 Rack $269
The
REP PR-1050 is a short version of the
REP PR-1000. I am a big fan of the design of the
REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage
, and safeties including a rack for under $300. The same goes for the
PR-1050. Some of the specifications of the
PR-1050 are:
-
72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
-
26" depth inside to inside, 44" wide inside to inside
-
2x2" steel
-
Plastic lined j-cups to protect bar knurl
-
2" hole spacing throughout working area
-
1.25" and 2" Pull up bars
-
Numbered uprights every 5th hole
-
Extra bar holders on the front of safeties, great for pressing outside the rack
-
2 Weight horns on rear base for storage and added stability
-
700lb weight capacity
-
400lb pull up bar capacity
-
400lb dip attachment capacity (dip attachment available as an optional upgrade)
This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.
Pros of the REP PR-1050 Rack
-
All in one design
-
Price
-
Short design
If you are looking for something simple and somewhat solid look no further. The
PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.
Cons of the REP PR-1050 Rack
This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the
Omni rack or
PR-5000.
Alternatives to the REP PR-1050 Rack
The
REP PR 1000 is a taller version of the
PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The
PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.
The
Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on
Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.
The
TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.
Conclusion for the REP PR-1050 Rack
If you think that the
PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the
PR-1000 instead.