Run Faster, Lift stronger, Think deeper

REP fitness PR-1050 rack vs TITAN X3 home gym

Written by Pascal Landshoeft | May 30, 2021 4:00:00 PM

REP fitness PR-1050 rack vs TITAN X3 home gym

This is a comparison between the Rep Fitness PR-1050 rack and the TITAN X3 home gym. Follow the links for more details.

Overview and review of the X3 Titan Tough Home Gym $978 - $5445

The X3 Titan home gym will put you back about $1000 - $5500. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for over $500”.

Related articles

 

Overview of the X3 home gym

 
The X3 Titan rack builds the center of this home gym configurator. From there you can choose several different configurations to fit your home gym to your needs without having to click everything together all over the TITAN website. The X3 has the same 3x3 uprights as the flagship Titan power rack but comes without the laser cut home numbers and big bolts. It is still a considerable piece of metal which will take a lot of abuse. The X3 comes in various depths and heights. Here are some example configurations: 
 
Base Specifications: 
- Overall Height: 80" or 90" (Short or Tall)
- Outside Width: 48"
- Inside Width: 42"
- Weight Capacity: 1,650 LB
 
24" Depth Specifications:
- Inside Depth: 24"
- Footprint: 52" x 34"
- Weight: 299 LB or 325 LB (Short or Tall)
 
36" Depth Specifications: 
- Inside Depth: 36"
- Footprint: 52" x 46"
- Weight: 323 LB or 349 LB (Short or Tall)
 
While this is the base rack for your home gym you can configure the following options with it. Depending on your needs and space you can get very tailored with the X3 home gym. 
 
 
The flat foot version of the X3 power rack enables you to put the rack up without having to bolt it to the floor. This is a good option when you don’t want to wreck the floor in your own home. You can get the flat feet for the short or tall version of the X3.
 
If you want your home gym to be a leg press as well you can use this attachment to be able to also use it as a leg press machine. Leg presses can be advantageous when you either want to isolate the legs only and want to go very heavy or when you don’t particularly like the barbell back squat. It can also be used when you have a shoulder or lower back injury. 
 
The rack-mounted H PND is a back extension machine that can be directly attached to the TITAN rack. This is usually a good tool for seasoned athletes to take care of their lower backs and younger athletes to train the lower back area which otherwise can easily be overlooked. 
 
If you also want to do dips at your station you can add the Y dip bar. Be aware that the upright you attach it on will be blocked for squats, bench presses or other exercises where you would like to rack a barbell in one side. 
 
The mounted wall ball target can be used for your wall balls and conditioning. Especially helpful when there is no wall nearby to do the exercise or you are not allowed to bounce medicine balls of the walls. 
 
A Landmine rack attachment widens the available exercises you can do with a barbell. You can do T bar rows and rotation exercises with the barbell to train your core.
 
The blues city and bombshell barbells are Titans cerakote bars. Cerakote coating is a special way of treating metal so that designs can be applied. It is also less like to corrode and was originally developed in the weapons industry. The only downside is that it is more likely to scratch when it touches metal. So if you do a lot of work of the pins instead of the j cups maybe get another coating. 
 
The 86” bar is a no-nonsense bar for 1500 lbs load. It comes with a tensile strength of 190.000. The material is steel with a chrome finish. 
 
An Olympic technique bar might be of interest to you if you have many beginners in your gym or children at home. This is a lighter barbell to focus on technique and explosiveness for the Olympic lifts. For advanced athletes technique plates with a normal barbell are usually preferred. 
 
The atlas bar is the bread and butter barbell from Titan. A solid 20kg barbell for all purposes. 
 

Pros of the X3 home gym 

 
With this home gym, you get 3x3 uprights for a very reasonable price compared to other options in the market. Compared to the flagship TITAN rack you also have some other attachment options like wall balls and landmines. If you a bit more into CrossFit or Powerlifting, you might have more options for attachments with the smaller bolts used on the X3. The flat foot option also enables you to have a home gym without having to drill holes in the ground, even though most rack owners say it isn’t really needed. Still, every vendor recommends it for safety reasons. 
 

Cons of the X3 home gym

 
Compared to the TITAN flagship power rack you will not be able to use the lever arms. If you are into bodybuilding specifically, this might be a downside for you. A full rack might also be to be for some. In very small spaces you might want to opt for a half-rack instead. 
 

Alternatives to the X3 home gym

 
Alternatives to the X3 home gym are: 
 
 
If you want to take it slow or already have quite some equipment at home you can get the Titan series power rack by itself. This lowers the cost and puts you at a lower risk to overspend because you are getting excited. If you purchase your equipment in drips and draps you will end up sinking more dollars into shipping costs. 
 
The T2 model comes in various shapes and heights and can be configured differently for your home gym to make it fit your space. The main difference to the other Titan racks is that the uprights are 2x2 instead of 2x3 or 3x3. 
 
The T3 rack model is also very similar to the Titan rack but comes at a lower cost. It is the same as the X3 except that it has 2x3 Gauge uprights instead of 3x3. 
 

Summary of the X3 home gym

 
The X3 home gym is a good value for money option from TITAN. You get a product that has been around for longer than the TITAN power rack and still has the 3x3 uprights. If you are ok with not always getting the biggest and best this is a reasonable alternative which still ticks most of the boxes. 
 
Titan is raising the bar on the garage gym without raising the price. Set your own gym rules with the Titan Tough garage gym package.

Overview and review of the REP fitness PR-1050 rack

This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Related articles

 

 
 

Overview of the REP PR-1050 Rack $269

 
 
The REP PR-1050 is a short version of the REP PR-1000. I am a big fan of the design of the REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage, and safeties including a rack for under $300. The same goes for the PR-1050. Some of the specifications of the PR-1050 are:
 
  • 72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
  • 26" depth inside to inside, 44" wide inside to inside
  • 2x2" steel
  • Plastic lined j-cups to protect bar knurl
  • 2" hole spacing throughout working area
  • 1.25" and 2" Pull up bars
  • Numbered uprights every 5th hole
  • Extra bar holders on the front of safeties, great for pressing outside the rack
  • 2 Weight horns on rear base for storage and added stability
  • 700lb weight capacity
  • 400lb pull up bar capacity
  • 400lb dip attachment capacity (dip attachment available as an optional upgrade)
 
This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.
 

Pros of the REP PR-1050 Rack

 
The pros of the REP PR-1050 are:
 
  • All in one design
  • Price
  • Short design
 
If you are looking for something simple and somewhat solid look no further. The PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.
 

Cons of the REP PR-1050 Rack

 
The cons of the REP PR-1050 are:
 
  • 700lbs capacity limit
  • Limited upgrade options
  • Not ideal for the west side method
  • Imported
 
This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the Omni rack or PR-5000.
 

Alternatives to the REP PR-1050 Rack

 
The alternatives to the REP PR-1050 rack are:
 
 
The REP PR 1000 is a taller version of the PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.
 
The Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.
 
The TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.
 

Conclusion for the REP PR-1050 Rack

 
If you think that the PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the PR-1000 instead.
 
 
View full post