REP fitness PR-4100 rack vs PR-1050 rack
This is a comparison between the REP fitness PR-4100 rack and the REP fitness PR-1050 rack. Follow the links for more details.
Overview and review of the REP fitness PR-1050 rack
This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.
Related articles
Overview of the REP PR-1050 Rack $269
The
REP PR-1050 is a short version of the
REP PR-1000. I am a big fan of the design of the
REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage
, and safeties including a rack for under $300. The same goes for the
PR-1050. Some of the specifications of the
PR-1050 are:
-
72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
-
26" depth inside to inside, 44" wide inside to inside
-
2x2" steel
-
Plastic lined j-cups to protect bar knurl
-
2" hole spacing throughout working area
-
1.25" and 2" Pull up bars
-
Numbered uprights every 5th hole
-
Extra bar holders on the front of safeties, great for pressing outside the rack
-
2 Weight horns on rear base for storage and added stability
-
700lb weight capacity
-
400lb pull up bar capacity
-
400lb dip attachment capacity (dip attachment available as an optional upgrade)
This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.
Pros of the REP PR-1050 Rack
-
All in one design
-
Price
-
Short design
If you are looking for something simple and somewhat solid look no further. The
PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.
Cons of the REP PR-1050 Rack
This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the
Omni rack or
PR-5000.
Alternatives to the REP PR-1050 Rack
The
REP PR 1000 is a taller version of the
PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The
PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.
The
Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on
Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.
The
TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.
Conclusion for the REP PR-1050 Rack
If you think that the
PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the
PR-1000 instead.
Overview and review of the REP fitness PR-4100 rack
This is an overview of the REP fitness PR-4100 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.
Overview of the REP PR-4100 Rack $429
The
REP PR-4100 is the folding version of the
PR-4000 rack that outbid the REP fitness rack product line. With this rack, you get two uprights, and the cross-members you need to build a rack that can be bolted to the wall with a folding mechanism. This is the ideal rack for a garage gym in which you still want to park or a floor space that should be transformed into a yoga or playroom after the use of the rack. Some of the specifications for this rack are:
-
Choose between 21.5" or 41" depth (from wall to the front outside of upright).
-
(1) pair of plastic-lined J-cups.
-
(1) easy-to-adjust 1.25" pull-up bar.
-
5/8" diameter hardware.
-
1" hole spacing in benching area.
-
2" hole spacing above and below bench area.
-
Uprights: 11-gauge steel, 3x3", 92" tall.
-
21.5" Dims: 18.5" inside length x 42.5" inside width.
-
41" Dims: 38" inside length x 42.5" inside width.
-
48.5" overall width.
This is a solid option to get a lower-cost folding rack of good quality. Especially with folding racks it nightmare sense to invest a few extra dollars as the folding action needs more attentional detail in production than a simple four post rack.
Pros of the REP PR-4100 Rack
-
Space efficient
-
Budget efficient
-
Reliable brand
The biggest plus of folding racks is that they can get out of the way when they are not needed anymore. If you only have one occasional user of the rack in the house O would seriously consider a folding rack.
The
PR-4100 is good on your purse from two perspectives. You are getting your rack from a company that imports their products from China and you are buying a product that uses less metal than a
PR-4000 or
PR-5000. This makes the
PR 4100 a smart buy. Especially if you are not planning on many upgrades and attachments.
Compared to Amazon resellers or TITAN fitness you will buy from a young brand that is still bending over backward to grow its customer base. You will get good, reliable service with this rack in most cases, that is why the price is a little higher than sourcing from Amazon or from TITAN.
Cons of the REP PR-4100 Rack
As this is a folding rack with smaller holes on 3x3 uprights your use of attachments will be very limited. Personally, I think the most you can really get out of a folding rack is a dip station and not much else, but that is just me.
If you buy from REP Fitness your rack will be produced and packaged in China and then send to a warehouse in the US. If that rubs your patriotic streak up the wrong way you have to buy from Rogue Fitness instead and pay the extra money American Labour costs.
My biggest con for a folding rack is that you still have to come up with some solution for storing your plates as you can not do it on the rack. Unless you keep it permanently in place which defeats the purpose. There are good wall storage solutions for plates but those involve more DIY.
Alternatives to the REP PR-4100 Rack
The Rogue RML3WC is what comes closest out of the Rogue fitness portfolio to you the
PR-4100. It has the same uprights with only slightly different drillings for the holes. Some say that the folding action on the RML3WC is a little smoother but that also hugely depends on where it is being installed and who did the job.
The
TITAN X3 folding rack is TITAN’s 3x3 upright folding rack. This is the best option for a low price while still having some proper customer support with it. Other options are Amazon resellers who just stuck produce to flip it for a small
margin in bulk.
The
REP SR 4000 is an alternative option if you believe in squat stands with a big base for stabilizing. I personally don’t but if you think that is a good idea the
SR 4000 is excellent value for money.
Conclusion for the REP PR-4100 Rack
I personally think folding racks are a great idea for home gyms that need to co promise. If you use your garage as a mechanic/workshop in parallel or own a fancy Sunday car, this is the right option for you.