Run Faster, Lift stronger, Think deeper

REP fitness SR-4000 squat stand vs PR-1050 rack

Written by Pascal Landshoeft | Jun 1, 2021 4:00:00 PM

REP fitness SR-4000 squat stand vs PR-1050 rack

This is a comparison between the REP fitness SR-4000 squat stand and the REP fitness PR-1050 rack. Follow the links for more details.

Overview and review of the REP fitness PR-1050 rack

This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Related articles

 

 
 

Overview of the REP PR-1050 Rack $269

 
 
The REP PR-1050 is a short version of the REP PR-1000. I am a big fan of the design of the REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage, and safeties including a rack for under $300. The same goes for the PR-1050. Some of the specifications of the PR-1050 are:
 
  • 72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
  • 26" depth inside to inside, 44" wide inside to inside
  • 2x2" steel
  • Plastic lined j-cups to protect bar knurl
  • 2" hole spacing throughout working area
  • 1.25" and 2" Pull up bars
  • Numbered uprights every 5th hole
  • Extra bar holders on the front of safeties, great for pressing outside the rack
  • 2 Weight horns on rear base for storage and added stability
  • 700lb weight capacity
  • 400lb pull up bar capacity
  • 400lb dip attachment capacity (dip attachment available as an optional upgrade)
 
This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.
 

Pros of the REP PR-1050 Rack

 
The pros of the REP PR-1050 are:
 
  • All in one design
  • Price
  • Short design
 
If you are looking for something simple and somewhat solid look no further. The PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.
 

Cons of the REP PR-1050 Rack

 
The cons of the REP PR-1050 are:
 
  • 700lbs capacity limit
  • Limited upgrade options
  • Not ideal for the west side method
  • Imported
 
This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the Omni rack or PR-5000.
 

Alternatives to the REP PR-1050 Rack

 
The alternatives to the REP PR-1050 rack are:
 
 
The REP PR 1000 is a taller version of the PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.
 
The Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.
 
The TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.
 

Conclusion for the REP PR-1050 Rack

 
If you think that the PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the PR-1000 instead.
 
 

Overview and review of the REP fitness SR-4000 squat stand

This is an overview of the REP fitness SR-4000 squat stand including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

 
 

Overview of the REP SR-4000 Squat stand $449

 
The REP SR-4000 is REP Fitness’s flagship squat stand. It comes in two height variations and with a stable base similar to a combo rack. Here are some of the specifications from the vendor:
 
  • Two height options to suit your needs ( 96" &103"). 
  • Sturdy 3x3” 11ga steel.
  • Compatibility with most REP 4000 series attachments.
  • 1” spacing throughout the bench press area.
  • Base-mounted weight horns for weight storage and added stability.
  • Long base with pre-drilled feet for optional floor-mounting.
  • 103” height option is great for taller athletes who want to perform kipping movements.
  • Includes Standard PR-4000 J-cups and 1.25” pull-up bar.
  • 5/8” holes on the uprights, 5/8” holes at the rear of the base, 1” holes on the sides of the base.
  • Not compatible with: The REP Belt Squat, Lat/Low Row Attachment.
  • Base dimensions: 73" x 53"
  • Weight: 96": 230lbs, 103": 237lbs
  • Weight Capacity: This is based on the j-cup capacity which is <1500lbs.
 
If you are really into squat stands for the freedom they provide and the money they save then this is good for you. I am personally not a fan, but I will get into the details.
 

Pros of the REP SR-4000 Squat stand

 
The pros of the REP SR-4000 squat stand are:
 
  • Massive built
  • Sturdy uprights
  • Compatibility with some attachments
 
For a squat stand, the REP SR-4000 is massive. This means a lot of security and stability for anyone who is working in it. If you are concerned about the security with a squat stand, this is a good choice.
 
The uprights are sturdy and beefy compared to cheap squat stands and even allow for some of the light PR-4000 attachments to be used. This makes it a more versatile option compared to cheap Amazon squat stands.
 

Cons of the REP SR-4000 Squat stand

 
Cons of the REP SR-4000 squat stand are:
 
  • Footprint
  • Safety
  • Storage
  • Price
 
The biggest con for me is the footprint of this squat stand and other ones of a similar design. If you put two uprights on the footprint of a four-post rack you might as well get a four-post rack. This is nothing against the SR 4000 per se but the design of these particular squat stands with a big base provides more security. You can also get these from other vendors like Rogue and TITAN.
 
While this lulls you in a false sense of security whilst saving you the cost of a four-post rack with similar steel, I think in reality it’s suboptimal. If you are in need of added security as a beginner, spotter arms and a squat stand are a good way to get injured. Many set up their spotter arms wrong, miss them when they fail a rep and the base of this squat stand can actually get in the way when you want to bail a squat. If you don’t know what you are doing, get a proper power rack. If you exactly know what you are doing, this squat stand is overkill.
 
Compared to other, cheaper squat stands without a base, this squat stand can not be easily stored and transported. It is also quite costly if you look at it from a squat stand perspective as you can also get a decent rack for this price.
 

Alternatives to the REP PR-4000 Squat stand

 
 
The REP PR-4100 is in the same price range as the squat stand. If you are torn between the two, definitely go for the PR-4100. It saves space, is more secure to squat in, and provides a better base for attachments, even though you need to remove them to fold the rack.
 
Rogue SML 2 is the closest in build-out of the Rogue portfolio to the SR 4000. If you wanted a very similar squat stand at a higher price thatching not imported thistles a good choice. Also, keep in mind which ecosystem you are entering as Rogue has been around for longer and therefore offers a few more options in their portfolio.
 
The TITAN X3 squat stand is the closest you can get to the SR-4000 in the TITAN Portfolio. If you want to get this show on the road with the lowest budget possible TITAN is a good bet.
 

Conclusion for the REP SR-4000 Squat stand

 
The SR-4000 is well built for its design. There are little to no production issues with it. That is if you buy into the concept of a squat stand with a big base which I just simply don’t. You either need the safety that a power rack provides or you don’t. If you are super advanced like Clarence Kennedy, you might as well get a squat stand that is two separate uprights for easy transportation, storage, and saving cost. Be aware that this necessitates that you are either super strong and won’t fail or know exactly what you are doing when you bail a lift. Spotter arms are in my opinion useless. This is the only piece of safety equipment I ever managed to break with rack pulls. You can get a decent rack for 400 dollars or very basic squat stands for a little more than a hundred. Get one of the two, but not a squat stand that eats up 400 bucks and considerable floor space.
 
View full post