Run Faster, Lift stronger, Think deeper

REP stainless steel Gladiator bar vs Sabre barbell

Written by Pascal Landshoeft | May 30, 2021 4:00:00 PM

REP stainless steel Gladiator bar vs Sabre barbell

This is a comparison between the REP fitness stainless steel Gladiator bar and the REP fitness Sabre barbell. Follow the links for more details.

Overview and review of the REP fitness Sabre barbell

This is an overview of the REP fitness Sabre barbell including the pros, cons, and alternatives. This article was originally posted in which barbell to buy from REP Fitness. Follow the links for more information.

Related articles

 

Rep Sabre Bar $179

 
The REP sabre bar is what I would recommend to someone who walks up to me and says "I want a decent barbell, but it shouldn't cost much" and does not provide me with any extra information about what they want to use it for. The price point is good and you get a decent barbell that you can use for several lifts. It is not for the professional powerlifter and weightlifter, but this population is smaller than the industry wants you to believe. The full specifications of this barbell are:
 
  • 150k tensile strength
  • 1000 lb rating
  • 28.5mm (25 mm women's) diameter
  • 20kg length 87.4"
  • 15kg length 79.13"
  • Zinc coating
  • High-performance ball-bearing sleeve design.
  • Dual knurl markings.
  • No center knurl on women's barbell. Men's barbell has an option with center knurl or without.
  • 1-year warranty
 
This is a good bar if you want to build your home gym for $500 to $1000 including plates rack and everything else. It still functions as a proper barbell, without being fancy on any of the specific features. Also a good buy in bulk for a commercial gym that does not specialize in powerlifting or weightlifting.
 

Pros of the Rep Sabre Bar

 
The pros of the REP fitness Sabre bar are:
 
  • Price point
  • All-around design
  • No extra features
  • Warranty
 
This barbell is simple and to the point. Noting fancy but still better than an axle bar or the basic barbell model from REP fitness. This barbell has a zinc coating against rust and is 28.5mm in diameter which is right between weightlifting and powerlifting standards. Compared to the basic barbell from REP fitness it also comes with a warranty
 

Cons of the Rep Sabre Bar

 
The cons of the REP Sabre bar are:
 
  • Imported
  • No bearing
  • No aggressive knurl
  • No center knurl
 
As you are getting one of the lower range models of REP fitness with this barbell you will also get nothing fancy on the extras. Each feature has been stripped down to the bare minimum will you still get a warranty. Good for your purse and decent for your experience.
 

Alternatives to the Rep Sabre Bar

 
Alternatives to the REP Sabre bar are:
 
 
The black sabre bar is the same barbell with the exception that a black coat has been applied. If you want to spice things up a little with black color, then this is the bar to get instead of the sabre basic model.
 
The Rogue Ohio bar would be the equivalent in the Rogue portfolio to the REP fitness sabre bar. This is the basic barbell that Rogue started their vast portfolio. This leaves you with more options for individualizing your barbell than with REP fitness, but the base model comes at a higher price than the sabre bar.
 
The Rogue Echo bar is Rogue's approach to making a barbell as cheap as possible. This is the bar they advertise to be taken into the field by the military as it won't hurt that much if it gets abused based on the price per item. If you want to go as low as possible on the sticker price.
 
The TITAN Atlas bar is TITAN fitness's take on a full barbell at the lowest possible price. If you want to build your entire home gym as cheap as possible with new equipment, then they are probably the best address to get in touch with in the US. The only downside is that they need to cut some corners on service to make these low prices possible.
 

Conclusion for the Rep Sabre Bar

 
The REP Sabre bar is a solid barbell for anyone who wants to optimize their budget and still wants a minimal warranty with the barbell. If i owned a gym that had a lot of average strength clients, then this would be the barbell I would buy in bulk.

Overview and review of the REP stainless steel Gladiator bar

This is an overview of the REP fitness stainless steel gladiator bar including the pros, cons, and alternatives. This article was originally posted in which barbell to buy from REP Fitness. Follow the links for more information.


 

Rep Stainless Steel Gladiator bar $399

 
The REP Stainless steel gladiator bar is REP fitness's top-tier Olympic weightlifting barbell. The knurl is medium while the focus is on high tensile strength and bearing to make the ride as smooth as possible for Olympic weightlifters. The full list of specifications runs as follows:
 
  • 205k tensile strength, 1500 lb rated
  • Medium depth knurl
  • 5 needle bearings per sleeve for a smooth spin
  • Ribbed sleeves to keep weights from sliding while training.
  • Weightlifting knurl markings
  • 28mm diameter
  • 87.4" length
  • Lifetime warranty*
 
If you can afford it, then there is not a lot you can do wrong with the REP fitness stainless steel Gladiator bar. This is a great purchase for anyone who is aiming to build an Olympic weightlifting gym at home. Commercial buyers might opt for the normal steel version. Especially if they are buying in multiples to save on cost per item.
 

Pros of the Rep Stainless Steel Gladiator bar

 
The pros of the stainless steel Gladiator bar:
 
  • Stainless steel
  • Good whip
  • Good spin
 
This is a great option for anyone who wants to spend no more than $500 on a good quality Olympic weightlifting barbell. The stainless steel makes it durable while it spins smoothly and has a great whip. REP fitness has improved on its successful Gladiator design by delivering it in stainless steel. Not a lot to do wring here.
 

Cons of the Rep Stainless Steel Gladiator bar

 
The cons of the Stainless steel Gladiator bar are:
 
  • Price
  • Imported
  • Lack of color options
 
If you are into the REP fitness portfolio you are already more price-sensitive than someone who buys their equipment from Rogue fitness. In that case, this is still a pricey barbell as you can get a piece of steel that does the job for between $200 and $300. You do not necessarily not bearing and stainless steel to get your home gym going, especially if you have not been training professionally in a team already.
 
REP fitness achieves its prices by importing from overseas. If you have an issue with that business practice and would rather buy from someone who produces and sources locally in the US then Rogue fitness and Sorinex are your alternatives.
 
Currently, the REP fitness production lines are not laid for the use of Cerakote for their barbell production to add color. I am sure it is only a matter of time until they switch suppliers and find a way of getting their hands on the necessary machines to upgrade their overseas supplier. For now, the only colored barbell in the REP fitness lineup is the Black Sabre bar.
 

Alternatives to the Rep Stainless Steel Gladiator bar

 
 
The Rogue Pyrros bar forms the pinnacle of weightlifting bars from Rogie Fitness. Co-designed with one of the biggest legends of Olympic weightlifting this barbell does not just provide the best in class when it comes to whip and spin but also a mind connection to a great weightlifter. If you want the best apart from Eleiko barbells then this is the one to get.
 
The REP deep Knurl bar is the top of the food chain in the REP portfolio when it comes to powerlifting bars. If you won’t do overhead lifts with your barbell but have $400 to spend the deep Knurl is the better choice than the gladiator bar.
 
The REP gladiator bar has all the good DNA from its stainless big brother, except the stainless steel bones. If you want a very close feel to the Stainless gladiator bar in terms of spin and whip, but do not want to shell out the extra dollars for the stainless steel, then the Gladiator bar is your friend.
 
The Rep Sabre bar is the right choice for anyone who is looking for an all-around barbell for all the needs of a Crossfitter at a decent price. If you are only going to buy one barbell to do all the lifts with then this is the value-for-money workhorse you want from REP.
 
The TITAN blues city Olympic barbell is TITAN’s touch on Olympic weightlifting. TITAN is the price leader in the market which comes at the cost of looser quality controls. If you want a smooth precision barbell this might work against you in the long run. Still, money saved and spent on plates is also not to be scoffed at.
 

Conclusion for the Rep Stainless Steel Gladiator bar

 
If you want the Apex predator in weightlifting barbells from REP fitness then the Stainless steel gladiator bar is your weapon of choice. There are higher quality Oly barbells out there like the Eleiko range or the Pyrros bar, but not at the same price point.
 
View full post