Run Faster, Lift stronger, Think deeper

TITAN plate loadable seated dip machine vs TITAN wall mounted pulley

Written by Pascal Landshoeft | Dec 14, 2020 5:00:00 PM

TITAN plate loadable seated dip machine vs TITAN wall mounted pulley

This is a comparison between the TITAN plate loadable seated dip machine and the TITAN wall mounted pulley including pros, cons, and alternatives. Follow the links for more details.

 
 

Overview and review of the TITAN wall mounted pulley $179

This is an overview of the TITAN wall mounted pulley including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Related articles

 

Overview of the TITAN wall mounted pulley tower

 
The TITAN wall mounted pulley tower is a great solution for any home gym that wants a pulley, but is strapped for space. The only prerequisite is that you are allowed to drill into the walls and ideally it is one of the outdoor / carrying walls. Plaster walls might not be ideal to install this so check your setup before getting to business. This pulley tower is plate loadable and comes with the necessary straps included in the shipping to start training. For the price you can not really complain and turn your gym in a more complete experience. The full specification of the TITAN wall mounted pulley system are:
 
- Compatible with the T-3, X-2, X-3, and TITAN Series Power Racks
- Small footprint makes this Wall Mounted Pulley Tower a perfect addition for those with limited space
- Heavy-duty powder-coated steel frame
- Standard 1-inch weight posts with 7-inches of loadable sleeve length
- 18-Different adjustable positions opens up a variety of exercises to suit any size athlete
- Bottom bracket allows you to install the pulley tower into walls without disrupting your baseboard
- Includes: (2) single-hand straps
 
- Overall Height: 84.5-in.
- Footprint: 27-in x 26.5-in.
- Overall Depth: 25.5-in.
- Weight Capacity: 350 lb.
- Product Weight: 75 lb.
 
This is a great addition especially in a garage gym that is cheap, versatile, simple to use and space efficient. Nothing you can do wrong here for the price of a fancy dinner.
 

Pros of the TITAN wall mounted pulley tower

 
The pros of the TITAN wall mounted pulley are:
 
  • Price
  • Versatility
  • Space requirements
 
The price of this pulley system is almost impossible to beat. You still get an industrial grade machine for the price of a consumer product. IT can be used for almost any pulley exercise you might wanted to do on a bigger station without the disadvantage of the lack of stability and the need for more space. Easy solution for a great gym addition.
 

Cons of the TITAN wall mounted pulley tower

 
The cons of the TITAN wall mounted pulley tower are:
 
  • Wall installation
  • Plate loaded
 
The only real problem with this is that the tools you need to drill into the wall will probably cost more to rent or buy than the pulley station itself. It also depends on whether you are actual allowed to drill into the walls of the house or apartment you are living in.
 
You will also need to factor in the cost of plates,if you do not already have some. 230lbs can be gotten from TITAN for about $400.
 

Alternatives to the Titan wall mounted pulley tower

 
 
The TITAN lat tower includes a seat and a weight stack for up to 300lbs to do lat pulls and rows. The design is a clone of the Rogue lat pull which outperforms the TITAN lat tower in the finish and finer details. Apart from that it is the same machine for a considerably lower cost.
 
If you only want a machine to perform rows, the TITAN plate loaded seated row is a good option with a small footprint that does not need to be installed on the wall. It comes including the seat and setup to row away once it is build. The only downside is that it is a one trick pony and not very versatile compared to the wall mounted pulley.
 
The Rogue Jammer bar is a high quality pull up bar from Rogue that you can install over a door frame. I highly recommend to install it at the kitchen door and do pull ups whenever you go in or come out of the kitchen. An easy approach to fitness, relatively cheap and you can not do anything wring with.
 
The Rogue lat pull machine is the current gold standard in the market for lat pull machines. This thing is overbuilt in every way and Rogue paid close attention to the finer details in the finish. This also means that this beast comes in at a high price of around $2000. This is only an option if money is if little concern to you or you running a very professional and highly successful commercial gym.
 

Conclusion for the Titan wall mounted pulley tower

 
The TITAN wall mounted pulley tower is one of the best options to get a pulley system into your home gym. Especially if you are good with tools and know how to install something into a solid wall. If you are not a handyman you can still get someone to install it for you and not be sad, as it was so cheap to buy this thing.
 
 
 

Overview and review of the TITAN plate loadable seated dip machine $229

This is an overview of the TITAN plate loadable seated dip machine including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Related articles

Overview of the TITAN  plate loadable seated dip machine

 
The TITAN plate loaded seated dip machine is a simple and effective machine to train your triceps. If usual dips are not enough anymore or are too hard for you than you can use this machine to start with the benefits or push them even further. It also a machine that is very easy to use for beginners or anyone who has to rehabilitate. The full specifications of the TITAN plate loadable seated dip machine are:
 
- Add weight to your tricep presses
- Adjustable seat height to fit athletes of all sizes
- Powder-coated paint job gives rust resistance
- Heavy-duty steel construction will last for years
- Optional bolt-down holes at the base, to add stability
- Installation is fast and easy – assembles in minutes!
 
- Footprint: 27.5-in x 30.25-in.
- Seat Back Height: 51-in.
- Seat Height: 17-in.
- Sleeve Length: 10.75-in.
- Handle Length: 16.75-in.
 
This is a good small machine for accessory work to your main goals if you can fit it into your gym.
 

Pros of the TITAN plate loadable seated dip machine

 
The pros of the TITAN plate loadable seated dip machine are:
 
  • Easy to use
  • Plate loaded
  • Small footprint
 
This is a straight forward machine which is easy to use and beats a very low injury risk. This makes it an ideal machine for a gym where you expect a lot of beginners to be present.
 
The TITAN seated dip machine is also plate loaded which makes it a good option for the budget conscious home gym owner as you do not pay for the integrated weight stack that comes with other machines.
 
Another pro of the seated dip machine is that it takes up a relatively low small footprint on your gym for a machine that includes a seat. If you already have a chair in your home you might as well turn it into an exercise machine.
 

Cons of the TITAN plate loadable seated dip machine

 
The cons of the TITAN plate loadable seated dip machine are:
 
  • Space requirements
  • Plate loaded
  • TITAN quality control
 
The TITAN plate loadable seated dip machine will take up more space in your gym than a dip attachment to your existing rack. If you have to work with a limited space than you will want to make the best of use and a dip attachment is probably the better option than putting another machine into a tight space.
 
Plate loaded machines are a great option if you are the sole user of your gym. If you have to provide facilities for many people at the same time  plates can become a trip and injury hazard. Depending on who you are targeting and the average fitness level of your clients you might want to lean towards machine that already have a weight stack attached to them. These cost more, but are usually safer to use and expose you to less risk as the owner of the gym than plate loaded machines.
 
Another con is the quality control from TITAN. While it is existent it is not as tight as with other vendors in the marketplace like Rogue fitness and Eleiko. That is natural result of competing at the low cost end of the market which TITAN decided to do. Also TITAN has several businesses across different verticals rather than focusing on fitness only. The result is that TITAN fitness is under a higher pressure to ship every unit that has been produced, even if it has minor quality issues. If you are fine with forcing some parts and applying some DIY to machines you have bought new, that is no issue. If you do not like this prospect, buy from another vendor.
 

Alternatives to the TITAN plate loadable seated dip machine

 
Alternatives to the TITAN plate loadable seated dip machine:
 
 
The TITAN dip rack attachment is an alternative to be used with your existing TITAN rack. These are easy to use and not that expensive. With this you can turn your rack in a dip station when needed and also get the dip attachment off when you want to do something else. This is a good solution in a home gym with space contraints. Ina commercial gym you might want to have the dip station permanently installed  and the dip seated machine becomes the better solution.
 
The Rogue Matador is a dip attachment for your Rogue rack. If you have a Rogue rack in your commercial or home gym you might eant to look into this option first before investing in an additional machine that does the same thing.
 
The TITAN power tower bench is a full gym for calisthenics including dips. If you are planning a home gym, but do not want to use weights, this might be the better option for roughly the same budget as getting a TITAN seated dip machine.
 

Conclusion for the TITAN plate loadable seated dip machine

 
This is a great addition for any gym that has the space to get dedicated machines for accessory work. It is easy to use and maintain and therefore will not create an additional headache in your gym like some pulley options can do. In a tight space you might want o look into rack attachments that will do the job rather than eating up more square footage with another machine.
View full post