TITAN change plates vs Rogue Urethane plates
This is a comparison between the TITAN change plates and the Rogue Urethane plates including pros, cons, and alternatives. It was published first under which titan plates to get. Follow the links for more details.
Overview and review of the Rogue Urethane plates
The Rogue Urethane plates will set you back about $1150 dollars or $7.46 dollars per kg. These plates are especially good to use for gyms who want long lasting plates. This overview has originally been published in the article "Which rogue plates to buy" which you can find on this blog.
What else to consider from Rogue
Overview of the Urethane plates
The
Rogue Urethane plates are the second most expensive ones in the Rogue portfolio per kg. What you get in return are the longest lasting, all weather plates you can obtain from Rogue. These plates are 450mm in diameter and made to IWF specs. They have a chrome insert and dead bounce on the drop. The chrome piece provides easy loading on the
bar and reduced friction on the sleeves. This is the plate to buy if your last
competition plates fell apart at the chrome insert.
Weight / Color / Diameter / Thickness / Price per pair
55LB / Red / 450mm / 58mm / $310
45LB / Blue / 450mm / 53mm / $260
35LB / Yellow / 450mm / 48mm / $220
25LB / Green / 450mm / 40mm / $160
10LB / Black / 450mm / 20mm / $70
Available sets
210lb, 2x 25-35-45LB $750
300LB, 2x 25-35-4x45LB $1050
320LB, 2x 25-35-45-55LB $1100
340LB, 2x 10-25-35-45-55 $1150
Pros of the Urethane plates
This is an all-purpose plate which will last a long time and is hard. It will take the abuse of many users of different experience levels and still look good. This is a great plate for high demands and someone who does not want to replace the plates as often compared to other plates with a chrome insert.
Cons of the Urethane plates
The biggest con is the high price. If you go for
Olympic or
bumper plates you will get a lot more kilograms per $$$. You might be buying twice in this scenario and you will also know that you took the cheap road to success. I personally stopped doing this and it yields great results.
Alternatives to the Urethane plates
C
ompetition plates will not last as long as they have a tendency to pull apart between the rubber and the chrome insert. They also bounce more. Still, if you want to get as close as possible to the real world championships, then these are the plates to go for instead with the slight risk that they might fall apart after years of heavy use.
The
black training plates are a great design from rogue which combines the
bumper plate effectiveness with the excellence of Rogue's
competition grade plates. You will find color coding and extra touches to make the plates more user-friendly and robust. This is the elegant choice of the professional.
Calibrated steel plates are the plates for anyone who wants to put the maximum amount of weight possible on the
bar while still having color-coded plates. These plates are also approved by the IPF and are used in competition. If you want to get serious about
powerlifting, this should be your choice.
Overview and review of the TITAN change plates
This is an overview of the TITAN change plates including pros, cons, and alternatives. It was published first under which titan plates to get. Follow the links for more details.
Related articles
Overview of the TITAN change plates
Price $19.99 - 134.99
Change plates are essential for good training to do micro loading. Micro loading basically means that you always try to lift more in your last session, even if it just a couple of grams. With the traditional nominations of plates, you can only jump in increments of 5 - 10kg. CHange plates make this range even smaller to keep a positive trajectory for your gains. The full specifications of the TITAN change plates are:
Available in pairs of 1.25 LB, 2.5 LB, 5 LB, and 10 LB
Rubber Coated Steel
Color-coded for easy identification
Plate Diameter: 6.75-in – 12.5-in.
Plate Width: 17 mm – 25 mm
Collar Opening: 51 +/- 0.2 mm
Color-Coded: 1.25 LB-White, 2.5 LB-Green, 5 LB-Blue, 10 LB-White
Finish: Matte Black
Total Weight: 37.5 lb.
The TITAN change plates are good, cheaper option to what you find elsewhere in the market.
Pros of the TITAN change plates
Pros of the Titan change plates are:
If you want change plates in all black that is something TITAN can provide. Also, as with all TITAN products, you pay about half of what you would pay elsewhere in the market.
Cons of the TITAN change plates
Cons of the change plates are:
- No color coding
- Finish
- Easy to steal
These plates are getting quite small so it can be easy to put the wrong weight on without color-coding. As these are change plates it is also very likely that you will use them outside the collar. This needs a very snug fit for the bar. As TITAN has its quality issues here and there and change plates are not the most expensive item in your cart, you might want to opt for a vendor with tighter quality control on this item.
For commercial gyms, it is also to consider that these plates are very easy to steal. I have been in several gyms and I use change plates often for my training. It just always seems that after 2 -3 months these keep disappearing. So keep them in a space where staff can directly see them.
Alternatives to the TITAN change plates
Alternatives to the TITAN change plates are:
- TITAN Color change plates
If you can afford the little extra money I would definitely recommend going for the
colored change plate option.
Conclusion for the TITAN change plates