Information on how to run faster, lift stronger and think deeper

Rogue RM6 rack vs TITAN floor glute and hamstring developer

Posted by Pascal Landshoeft

Jan 13, 2021 9:00:00 AM

Rogue RM6 rack vs TITAN floor glute and hamstring developer

This is a comparison between the Rogue RM6 rack and the TITAN floor glute and hamstring developer including pros, cons, and alternatives. Follow the links for more details.

Subscribe for free

 
 

Overview and review of the TITAN Floor glute and hamstring developer $259

This is an overview of the TITAN floor glute and hamstring developer including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Related articles

 

Overview of the Titan floor and glute hamstring developer

 
The TITAN floor and glute hamstring developer is a compact machine that you can easily transport and lean against a wall to develop your glutes and work your core. The price is low and it can also be stored against a wall easily to save space in a crammed home gym. If you want a Glute and hamstring developer in your hoe gym, but always though other solutions are too bulky, this is the solution for you. The full specifications of this machine are:
 
- Handle and wheels for easy mobility and storage.
- 6 adjustable foot roller positions. 
- Low profile allows for easy storage. 
- 2" thick pad and 4" thick foot rollers for your safety and comfort. 
- Heavy duty steel construction.
 
- Pad Dimensions: 23" x 49" x 2"
- Overall Footprint: 24.5" x 58"
- Foot Roller Length: 7.75" per foot. 
- Foot Roller Diameter: 4"
- Adjustable Foot Roller Height: 2.5"-7.5"
- Foot Plate Dimensions: 19.5" x 10"
- Material: Steel
- Weight: 115 LB
 
This is a good compact solutions for small gyms or physiotherapists with small offices where they want to work with their clients on rehabilitation after a sports injury.
 

Pros of the Titan floor and glute hamstring developer

 
 
  • Compact design
  • Low price
 
The two main positives about this Glute ham developer are its compact design and low price. Compared to the bigger machines this cuts your invest by two thirds and you usually do not load Glute ham development exercises heavy anyway. This can be stowed away under the bed and wait for you in the mornings or evening to do your prehab and rehab before you do your heavy lifting somewhere in the day.
 

Cons of the Titan floor glute and hamstring developer

 
 
  • Can move around while you are exercising.
  • Close to the ground might not be for everyone
 
If you are giving it your all on this machine with yanking movements it can start to travel on the floor. If you get this and use it regularly I recommend that work with very controlled movements. With the bigger machines you can get away with more and of course also fit bigger athletes on them to train.
 
With this machine you are very close to the ground. Depending on where your gym is, what type of floor you have and how regular it is being cleaned not everyone might like to have their face in the mud.
 

Alternatives to the Titan floor glute and hamstring developer

 
 
 
The TITAN Glute and hamstring developer is the best machine you can get from TITAN to train your posterior chain. It combines a GHD and a reverse hyper based on the Economy H-PND. The pad might be a bit small depending on your own size, bu overall this is a solid option for all your posterior chain needs if you can fit it in your gym.
 
The TITAN H-PND is the biggest reverse hyper you can get From TITAN. It has a massive table and steel tubes. The padding can take almost anyone on and you will not be disappointment. This is a good option for a Iron den gym that is looking into getting a reverse hyper and a separate GHD.
 
The Rogue Donkey is the current gold standard in the industry for reverse hypers and GHD machines. It is build like a tank, has a great pad and is finished with great stitching and leather. All of this also comes at a high price and space requirements. We are in the range of $2000 for this machine and it takes up considerable space.
 
 

Conclusion for the Titan glute and hamstring developer

The TITAN Glute and hamstring developer is a great option for a home gym or a commercial gym with very limited space. It is easy to store and move and does not cost a lot to train your glutes. The only downside is that it can not be loaded with weight and might move around on the ground of your exercising like a maniac on it. 

Overview and review of the Rogue RM6 rack

Price: 2.000 - 2.640

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster RM6 rack will either be the pride and joy of your home gym or the impressive addition to your gym for the most ambitious lifters. See the details in this article.

What else to consider from Rogue


Overview of the Rogue RM6

 
The RM6 is the flagship rack of Rogue. If you buy a 24' Monster Rig in the racked configuration you basically buy multiple RM6 with pull up bars in between them. This is the rack for serious home warriors or small gyms who do not want to compromise. 
 
The RM6 has a length of 76'' and width of 49''. You can get the rack in three different heights ranging from 90'' through 100'' to 108''. The Footprint comes in at 80'' x 53''.  The new keyhole design also makes it easier for you to fit smaller attachments into the Monster series. You can choose from the following colors for the RM6:
 
  • Bright blue
  • Bright Green
  • Burnt Orange
  • Dark Blue
  • Dark Red
  • Gun Metal
  • Light Gray
  • Rogue Red
  • White
  • Satin Clear
  • Satin Black (Standard)
 
All of these options come in a medium gloss powder coat. Above this, you have many options to customize the top crossmembers, safeties and J Cups. The better the options you pick the higher the price. If you go for all the finest it drives the price to 2.640$. Then you have the fanciest pull-up bars, flip down safeties and J cups that money can buy from Rogue. 
 

How many clients should the RM6 bring you?


If you think that the RM6 will bring you 7 -9 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 4.000$ - 5.400$ net new revenue against an investment of 2.000$ - 2.600$. Adjust the numbers for your own gym accordingly.
 

Pros of the Rogue RM6

 
This rack gives you a full and a half rack in one go. With this, you can train more athletes at the same time. If you do not want to train multiple athletes on the same rack, you can use the half rack for storage. Another option is to install a Rhino belt squat Drop in at the back of this rack. This can be a very powerful configuration to attract powerlifters to your gym. 
 

Cons of the Rogue RM6

 
A lot of people will argue that this rack is completely overbuilt. The little sisters of the Rogue line, Echo, Infinity and Monster lite bear this reputation. You can definitely save a lot of money by going with other options. It depends on your needs. For myself, I only want the best to be the best. No one in the market argues that Rogue products are built to last, only price is a concern. 
 

Alternatives to the Rogue RM6

 
Based on this budget here are some alternatives you might want to consider to the RM6:
 
  • 1x RM4 1.300$ to 2.000$
 
If you do not know exactly how you are going to use the half rack at the back of the RM6 you are better of going with an RM4. Ask yourself whether your gym already has enough storage options for plates and whether your clients will use a half rack. Often the answer is that you already have enough storage and clients do not like to use half racks. Same goes for basement and garage gyms. You can use the saved space for something else. The only disadvantage of this option is that you can not install a Rhino belt squat in the back of the rack. You can remedy this by buying a racked Rhino version at a later stage.
 
The RML is the Monster Lite version of the RM6. It gives you the same space and storage options with less sturdy beams. This is more than enough for most applications. If you want to save money and still have a very sturdy rack, this is the option with extra storage and a half rack at the back.
 

Conclusion

The RM6 is one of the most overbuilt and yet impressive racks you can get in the market. When you get this you know that you did yourself and your clients proud. Even the biggest athletes will not be able to make this rack rattle.

Topics: Rogue