Rogue Westside Power bar vs Castro bar

This is a comparison of the Rogue Westside bar and the Castro bar including pros, cons, and alternatives. Follow the links for more details

Overview and review of the Rogue Castro bar [Article, Video]

This is an overview of the Rogue Castro bar which is made of bare steel and therefore very cost efficient. This article was originally oublished under "Which Rogue barbell to buy". Follow the links to learn more.

Price 275$

Overview

The Castro bar is a bare steel bar which comes closest to what you find in most commercial gyms. This is the lowest price tag you can get from Rogue for a full barbell. This makes it a good fit for anyone on a budget who has to buy a lot of barbells or expects them to be stored outside/transported often. For those scenarios, it is a waste of money to get anything that it pretty or elaborate in function.

The Castro bar weighs 20kg and comes in at 28.5mm diameter. It can take up to 190K PSI tensile strength with a good whip. The knurling is standard and the sleeves are attached via bushing. The loadable sleeve length is 16.50. Based on this it is the lowest priced multi-purpose bar available from rogue. Other bars are either special use or designed for children.

The Castro bar is the option to go for if you want to go spend as little as possible while still maximising the training options. If your gym/facility can also live with the fact, that these bars might look quite beaten up pretty fast, even better.

Pros of the Castro bar

The ultimate reason for the Castro bar are the costs. You still get a Rogue bar which is made in the United States at relatively low prices. The bar still goes through the same basic quality checks and holds a warranty. There are other vendors out there who might send you a bar with a lower price tag. Think twice whether you will get the same customer service, warranty and quality checks which only slightly retails over the cost of the raw materials, never mind the labour.

Cons of the Castro bar

A big con of the Castro bar is the bare steel. This finish is likely to show corrosion and use. This means you will need to take more care of it and maintain it more often. If you already have the labour and the necessary equipment to clean bare steel, you might even turn this into a plus. If you want to drill discipline into a bunch of new recruits you might get in a barbell cleaning session once a month on top of the other equipment maintenance you do.

Learn more about the specs of the Rogue Castro bar and purchase on the Rogue website

Review and Overview of the Rogue Westside Power bar

This overview of the Westside bar was originally published in my comprehensive guide on which Rogue barbell to buy. If you are currently considering to buy a Rogue barbell it is worth a read to get input on the latest models. I update the guide on a yearly basis depending on Rogue's new releases.

Price 345$

Overview of the westside power bar

The Westside bar has been developed together with Louie Simmons which is not too far from his own gym. The Westside barbell training facility is world famous for continuously producing some of the strongest powerlifters in the US and on an international level. The Westside method is a staple for strength coaches. The method is especially well tailored to lifters who compete with bench press shirts and squat and deadlifting suits.

The westside barbell weighs in at 45lb with a diameter of 29mm. It can withstand 205K PSI tensile strength and connects the sleeves to the shaft via bushing. Rogue offers a black zinc finish on shaft and coating. The knurling is powerlifting and the bar has no whip. The loadable sleeve length is 16.25. There is no 20kg version available.

The westside barbell was part of one of the earliest pushes of Rogue to diversify their portfolio away from their Ohio bar and Bella bar. So far, the westside bar has not gotten a Cerakote facelift. This might be planned in the near future. The westside barbell is a good alternative to the Ohio power bar or Thor power bar. Keep in mind that this is a powerlifting speciality bar. If you are mainly focused on weightlifting have a look at the Pyrros bar & training bar. If you own a CrossFit gym stock up on all-purpose barbells like the Ohio and Bella bar first before you branch in special bars like westside bar.

Westside bar pros

When you are looking for a very stiff bar with a less aggressive knurl this is the bar to go for. You get 205K of tensile strength with standard knurling. The fact that Louie Simmons gave it his approval also points in the direction that this is the right bar for powerlifters who vary their grip often. This is a crucial component of the westside method. There are a few reviews out there which prefer the West Side barbell to the Ohio power bar, even though it comes in at a higher price.

Westside bar cons

The black zinc finish is more open to corrosion than other finishes from Rogue. It is also a powerlifting specific bar and you might also have to buy an Ohio deadlift bar to complete the set. Depending on your need the Matt Chan bar retails at just a slightly higher price, has the same tensile strength and has a better whip. It all depends on your goals. If you want to do more than powerlifting this bar is not ideal. If your main focus is the big three go for this one.

Conclusion

The westside bar is a great option when you are mainly focused on powerlifting and want to do the three big lifts. It is a bit more upmarket than the Ohio power bar and less expensive than the Rogue Ohio deadlift bar.

Learn more about the specs of the Rogue Westside power barbell and purchase on the Rogue website