Information on how to run faster, lift stronger and think deeper

TITAN T-3 Series Yoke vs Rogue RML 390F

Posted by Pascal Landshoeft

Jan 11, 2021 9:00:00 AM

TITAN T-3 Series Yoke vs Rogue RML 390F

This is a comparison between the TITAN T-3 series Yoke and Rogue RML 390F including pros, cons, and alternatives. The Original was published in Which Strongman equipment to get from TITAN. Follow the links for details

Subscribe for free

Rogue RML 390f flat foot 

 

The Rogue RML 390F rack comes in at $795 and is one of the mid-range options for under $1000 from Rogue. Learn more in this review which was originally published in the Article "Which Rack to buy from Rogue for under $1000".

 

Overview of RML 390F

 
The Rogue RML 390F is an option from Rogue that does not need to be bolted to the floor. You will get a half rack for a reasonable price which can be placed anywhere from your garage, to one of the spare bedrooms or in the corner of an already established gym. It comes in black is manufactured in Columbus, Ohio. 
 
The 390F weighs in at 295LB with a length of 48'', a width of 49'' and a height of 92.375''. Note that because of the extra beams at the bottom it is slightly higher than the average 90.375'' from Rogue. It comes with Westside Hole spacing and ships with a Single Skinny or a Fat/Skinny pull up bar, band pegs, and J Cups. The stell notes come in 3x3'' for the uprights and 2x3'' for the bases. With this rack, you are entering the Monster lite series of Rogue and the accessories available in there. 
 

Pros of the RML 390F

 
This rack is easy to install and light. With this, it can be added to any kind of floor that you do not want to drill into. This can be especially beneficial when a gym already has been outfitted or your landlord does not allow for these alterations to be made. With this, you are set up and ready to go in no time, while it will also take up little space.
 

Cons of the RML 390F

 
As this is a small rack and it won't be bolted down to the floor it is not ideal for any extreme exercises. If you kip like a beserker or regularly throw 400 pounds or more around you might want to get a rack that is either bigger if you don't bolt it down or a smaller rack that can be bolted down to the floor. You will also have to think about where to store your plates as on the rack itself might not leave you with the best experience due to lack of space.
 

Alternatives to the RML 390F

 
 
The RML 390C would be an alternative to add color to your life. It has roughly the same dimensions as the flat foot and can be bolted to the ground. The price is higher, but you will get a good rack in your choice of color.
 
If you don't want to increase the budget and prefer to have a rack that can be bolted to the ground for extra stability the RML3 might be the right choice for you. It comes in at roughly the same price and has also less height. This might also be a better solution if you have a low ceiling. 
 
The RM 390F is the big brother of the RML 390F. This is the monster version of this rack. If you want to build on your investment and upgrade your rack over time, this is the option for you. There will be more upgrades available for the Monster series than for the Monster Lite is Rogue focuses on the higher price tag items first to push the portfolio forward. 
 
 

Overview and review of the TITAN T-3 Series Yoke

This is an overview of the TITAN T-3 series Yoke including pros, cons, and alternatives. The Original was published in Which Strongman equipment to get from TITAN. Follow the links for details

 

TITAN T-3 series Yoke $380

 

Overview of the TITAN T3 series Yoke

 
The TITAN T3 series Yoke is the Yoke version of the best selling TITAN T3 rack. With the yoke you get an additional fat crossbar to use it as a yoke, feet, and four uprights four plate storage. This unit also easily breaks down for storage and is very space efficient. Yokes are often overlooked as a very good, cheap alternative to a squat stand or rack. What you will need to purchase in addition is a pir of spotter arms and J cups to use the Yoke in this way. That bring the overall investment nearer to the $500 to $600 mark. Still, I highly recommend yokes, especially if you place it in a garage gym. The full list of specifications for this yoke is:
 
- Great alternative to a Power Rack - Serves the same purpose with other functions in one.
- Use as a Squat / Press Stand, Push or Drag Sled, or Yoke. 
- A staple for Strongman training.
- Adjustable crossbar to custom fit your height.
- Integrated vertical plate storage. 
- 2" hole spacing on uprights | 1" Westside spacing through the bench zone.
- Compact 72" design means you can use the Titan Yoke anywhere you train.
- 2.95" Crossbar Diameter.
- Now compatible with competition plates!
 
- Weight: 166 LB
- Height: 72"
- Inside width: 45" 
- Footprint: 51" x 52"
- Uprights: 2"x3" 11 gauge steel 
- Weight capacity: 750 LB
 
This is a great budget option for a commercial gym or home gym, that wants to get the maximum out of their dollar. Apart from yoke carries this yoke can be used for stone lifts over the bar, be used as a regular squat stand and plate storage. It also comes with feet so that you do not need to bolt it to the ground to be safe.
 

Pros of the TITAN T-3 series Yoke

 
Pros of the TITAN T-3 Yoke are:
 
  • Versatility
  • Price
  • Compact design
 
The TITAN comes with a wide range of possible exercise you can do it with it. You can use it as a squat stand, pull up bar, plate storage and create a complete gym in itself at a lower cost than a full rack. The price of TITAN T-3 Yoke is great compared to other rack options from TITAN, but also compared to the Rogue Y1 which costs $495 instead of the $380 ask price from TITAN. The compact design also helps to collapse and store it away quickly if you need to. This makes it a good option for a garage gym setup, where you also want to use the garage for its original purpose or as a workshop.
 
Cons of the TITAN T-3 series Yoke
 
Cons of the TITAN T-3 series Yoke are:
 
  • TITAN finish
  • Bigger footprint compared to a half rack
  • No Full safeties, only spotter arms
  • Spotter arms and J-cups not included
 
The TITAN finish means that TITAN generally as a higher risk of the coating being not optimal or the welds being a bit sloppy compared to other brands in the market like Eleiko and Rogue Fitness. As most of the TITAN equipment costs considerably less than the competition they need to cut corners by hiring part time or summer workers, or a bit more lenient quality control. That doesn't make the equipment unusable, but if you want consistent quality with your purchase and not have a bad feeling about how it might turn out on delivery, Rogue and Eleiko are the safer bet. That being said, for a yoke it is a great price.
 
If space is a concern you have to keep in mind that the four uprights including the plates you might store on them make the footprint f a yoke considerably larger compared to a simple half rack. If space is a concern for you, but you still want to train heavy, you might want to look into a half rack rather than a yoke to save some space. The trade off is that a half rack can not be used for any carries or sled pushes.
 
The last thing is that Yokes only have two instead of four uprights. This means that you can only use potter arms as a safety. I personally hugely dislike spotter arms as this is the only piece of equipment I have manged to break with rack pulls. It was not pretty. I also find that you are easy to miss the spotter arms on a bench press or squat. The longer the spotter arms, the easier it is to actually hit them on a fail, but the more likely they become to break at the fixation point. If you want to squat heavy by yourself and know that you fail from time to time, you are better of getting a half rack or full rack with safety pins.
 
What is a bit of a shame is that the J-Cups and spotter arms are not included with the purchase at $380 which would make it a really sweet deal to build a home gym. The matching T-series spotter arms are an additional $100 and the J-Cups another $70 to complete a home gym setup that can also be safely used for squats and bench presses.
 

Alternatives to the TITAN T-3 series Yoke

 
Alternatives to the TITAN T-3 Yoke include
 
 
The TITAN T3 rack is made of the steel gauges than the Yoke. IT can also be purchased in color and various heights, depending on your needs. The TITAN T-3 is a long staple of TITAN and a solid option for a home gym when someone is bench pressing and squatting heavy on a regular basis. If you do not like spotter arms or dropping weights when you go all balls out, this is the better option from TITAN. The price will be about $100 to $200 higher than for the yoke as you will get more steel in your delivery.
 
The X-3 series from TITAN is one step up from The T series and uses thicker uprights which makes these racks more stable. Compared to the T-3 Yoke you will probably invest $200 to $300 more depending on what you ultimately decide for. The X-3 line also has racks which offer feet on the bottom of the rack so that it does not need to be bolted to the ground. This is a good option for home gym for someone who does not only lift heavy, but also will do a lot of pull ups, band pulls and other exercises where you pull the rack in different directions. The extra thickness of the tubing makes this rack more stable for these scenarios than the T-3- line. This is not relevant if you only squat and bench press as this doesn't shake the rack as much.
 
The Rogue RML 390 rack is a half rack from Rogue comes in various colors and starts at a price of $1.015. While the price is considerably higher than the TITAN racks and yokes, you will get some of the finest fitness equipment that money can buy. Rogue is not the best option when you are on a budget but is almost unmatched in quality, customer service and forward thinking in the market. If you want to make sure that some american veterans get paid for the making your rack, you have a way higher chance of your equipment being made by someone who is fairly paid and in a stable job by buying Rogue equipment. If you only want the cheapest price tag, Rogue is the wrong place to look.
 
The Rogue Yoke is the original from which TITAN made a lower cost copy. Rogue offer their Yoke in two different heights at a price point of $495 and $560. While Rogue caters a little more towards the crossfit crowd and suburban dads, TITAN caters a little more to the ones who want to build a steel dungeon in their basement for cheap. I am a huge Rogue Fan and therefore biased and would get the Rogue Yoke if it was only between a Yoke from Rogue or Yoke from TITAN as the prices are fairly close together. $100 bucks for piece of mind that a might not have to force some components, have some missing screws on delivery or any other funny business is worth the while for me. However, if you are intending to build a steel dungeon and also buy a bunch of plate loaded machines on the same ticket / outfit an entire home gym on a budget, than TITAN is a serious contender as you can save a lot and also have a wider choice in machines. 
 

Conclusion for the TITAN T-3 series Yoke

 
The TITAN T-3 Yoke is a great option for building a simple home gym. In fact, Yokes are often overlooked for this purpose, especially if you have quite a bit of space to play around with. Be careful to also put the spotter arms and J-Cups into your basket when you are purchasing as it can be frustrating to buy these things piece meal and then have to wait and pay for shipping twice. It does what it says on the tin, but if you are lifting several hundred pounds of weight regularly by yourself, get a full cage instead. I know there is many people out there who do it just with a squat stand, but better to be safe than sorry.

Topics: TITAN