TITAN T3 folding rack vs Rogue RM 390F [Article, Video]

This is a comparison between the TITAN T3 folding rack and the Rogue RM390F. Follow the links for more details.

Overview and review of the Rogue RM 390F Flat Foot Monster Rack

Price: 1.211

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster Flat Foot will save you bolting down the rack. You will have no holes in the floor with this one. See the details in this article.

Overview of the RM 390F Flat foot

The RM390F rack is a special rack in the Rogue Line up. IT is one of two racks with the flat foot design. The flat foot design makes it possible that you do not have to drill the rack into the ground to anchor it. This makes the flat foot a very popular option in scenarios where a wood, carpet or rubber floor have already been installed and should not be damaged.

The Flat Foot weighs 335LB and comes in with a width of 24''. It is 93'' high and therefore has a footprint of 54''x'50''. The flat foot is compatible with the accessories of the Monster series. The only thing to consider is that Band pegs and safety spotter arms should not be used with the Flat Foot Monster rack. Get safety pins instead.

How many clients should the Rogue RM390F bring you?

If you think that the Rogue RM390F will bring you 4 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 2.400$ net new revenue against an investment of 1.211$. Adjust the numbers for your own gym accordingly.

Pros of the 390F Flat foot

The biggest pro of this rack is the flat foot design. This means you can install this rack anywhere where there is space. No nasty holes in the floor which need to be refilled once you want to move the rack somewhere else.

Cons of the 390F Flat foot

If you get a half rack you have to think about where to store your plates. In addition, not everyone likes to train in a half rack. IT can be a bit tight for a three-step walk out.

Alternatives to the 390F Flat foot

For the same budget of 1.211$ you have the following alternatives with Rogue:

1x RML 390F Monster Lite @795$

The Rogue RML 390F is the Monster Lite version of the flat foot design. This is a very viable option to save about 500$. You are already in the market for a solution with a small footprint for home use and small athletes. You might as well save a bit more money by going for the slightly less sturdy construction of the same product.

1x Rogue Froning RML 4100C Power rack @1.150$

If you want a full rack that gets you close to the champions this is the rack to go for. Think of the fittest man on earth while training to set new PRs in a full rack dedicated to the greatest CrossFitter of all time.

Conclusion

The 390F Flat foot is a great half rack to use at home which does not need to be bolted down. With this you can train and move whenever it is convenient.

Overview and review of the T-3 Folding rack

The TITAN T3 folding rack will put you back about $300 - $450. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500”

Overview of the T3 folding rack

The T3 folding rack is an option from TITAN which uses the 2x3 steel tubes from the T3 series to form a foldable rack. Foldable racks are very popular with garage gym owners as they give you the option to either still park your car in the garage or provide more space if you want to to do conditioning in your limited space. The features and specifics of the T3 are:

Rack details

2" x 3" 11 Gauge steel.
Rackable Capacity: 1,100 LB
Height: 91"
Width: 50"
Depth: 41.5"
Weight: 175 LB

This is the optimal option for dads who have to compromise with their wife to get a man cave in the garage.

Pros of the T3 folding rack

The T3 folding rack comes at an excellent price compared to the competition of TITAN. You will get a functional rack which folds to the wall in case you need to get it out of the way. This saves space and money on your purchase.

Cons of the T3 folding rack

A folding rack will not be as stable as a full rack which you bolt to the ground. Depending on how much abuse you throw at the rack you might want to reconsider a moveable installation. If you want to use an accessory with your rack, you will also have to deinstall it every time you would the rack. Apart from this TITAN has been reported to struggle more with mi or quality issues and inconsistencies. This doesn’t impact the functionality of the equipment, but it’s appearance and longevity.

Alternatives to the T3 folding rack

41 folding rack
X2 power rack
X2 and incline combo

The 41 folding rack is a folding rack with 3x3 Instead of 2x3 steel tubes. If you want more metal for roughly the same price this is the one for you.

The X2 is the one of the cheapest series in the TITAN line up. With its 2x2 steel tubes, it uses the least material to build a rack. If you want to downsize on all ends to fit a bench and rack into $500 budget comfortably, this is for you.

Summary for the T3 fold rack

A good option for Dads who have to compromise with Mom for garage space on a budget.