Reflex competition bench vs Rogue Adjustable bench 2.0
This is a comparison between the Reflex competition bench and the Rogue adjustable bench including pros, cons and alternatives. Follow the links for more details.
Overview and review of the Rogue adjustable bench 2.0
The Rogue Adjustable bench 2.0 comes in at $545 and is a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".
What else to consider from Rogue
Overview of the Rogue adjustable bench 2.0
The
Rogue Adjustable bench 2.0 is the best value for
bench out of the
Rogue portfolio. This is the
bench to get when you do t have the money to invest into an
AB2 for your personal gym or want to upgrade from the
Utility line for your commercial gym. The special features of the
adjustable bench two are its cost-efficient design and the pad with no gap. This makes it a solid choice. The specifications are:
-
Made in the USA
-
(6) Adjustment Positions: 0-85 degrees
-
Pad Height: 17.5" , 56.25" at 85 degrees
-
Pad Width: 11.25" (Pad)
-
Length: 52" (Overall Pad Length)
-
Virtually No Gap between Seat/Back Pad
-
(2) Seat Positions: Flat or Upward Angl
-
Wheels and plastic-lined handle for mobility
-
Rubber caps on legs to prevent sliding, protect floor
-
Optional Spotter Deck
-
Color: Black
This is the bench for every occasion.
Pros of the Rogue Adjustable 2.0
Good balance between features and cost for a Rogue bench. Almost no gap between the upper and lower pad.
Cons of the Rogue Adjustable 2.0
Limited range of adjustments and no decline bench press possible.
Alternatives to the Rogue Adjstable 2.0
Alternatives to the Adjustable bench are
The
AB3 is the Porsche of portable benches from
Rogue. If you want to be able to do it all while still rolling the
bench around, this is the one to get. However, for the price of this
bench, you can also get a very good rack.
The
Utility bench is not adjustable but has up to 6 custom configurations for the flat
bench press. If you don’t care about the incline or decline
bench press, look into the
Utility bench.
Summary for the Rogue Adjustable 2.0
The
adjustable bench 2.0 is the best value for money option from
Rogue for an
adjustable bench. Compared to other models you will save money. If you don’t want to decline
bench press or
bench 1000 pounds, this is the one for you.
Overview and review of the Reflex competition bench
The Reflex competition bench comes in at $1697 and is a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".
Overview of the Reflex Competition bench
The
reflex competition bench setup delivers a sturdy machine for
bench pressing competitions. This is the kind of
bench where all sizes of athletes can perform to their very best. A
competition bench is needed so that spotters can do their work properly, but also to provide the athletes with enough grip on the
bench. All of this is included in this piece of equipment. The specifications are:
-
Meets International Powerlifting Federation ( IPF ) Guidelines
-
3/16 wall and 11ga. Welded Tubular steel construction.
-
Powder Coated finish.
-
Oversized 24×30 Polished Diamond 6061 Aluminum skid plate for foot deck.
-
6 position band pegs.
-
14 position Weight saddles w/ handles and engraved numbers.
-
11 position Over-Sized Safeties w/ engraved numbers.
-
Full Framed supported Pad
-
Plastic lined Saddles & Safeties
-
Additional adjustment hole in both Saddles & Safeties to use 1/2 hitch pin.
-
1in high-density foam pad.
-
Made in the USA
-
Weight 370LB
-
Length 60”
-
Width 50”
-
Height 55”
Remember that if you have to move this one around a lot it will be shipped by freight as it is so bulky.
Pros of the Reflex competition bench
This is a secure, sturdy bench press setup which meets the standards of the IPF. With this, even the biggest athletes can chip away at their geared 1000LB be ch presses.
Cons of the Reflex competition bench
It is a single purpose station which means you still have to provide a squat setup for your competition. It will also be hard to ship or transport to wherever the competition is held.
Alternatives to the Reflex competition bench
The
Rogue combo rack is also IPF approved and can be used to squat and
bench with plenty of spotter hopping around. It can also be broken apart for easier transport. If you regularly want to do powerlifting competitions in different locations this might be the better pick.
The
Rogue Westside bench is a beast that even your biggest athletes won’t break. In addition, it gives you more options for starting positions and attaching bands. This makes it a great work station to prepare for your next competition.
The
Rogue AB3 is the
bench of choice for weekend warriors who want to have all
bench press options at home. This
bench is portable and therefore not recommended when you want to
bench 1000LB or do other crazy stuff that might make the
bench move around.
Summary for the Reflex competition bench
If you are looking for a stationary
bench station which complies with IPF standards the reflex
competition bench is a good pick for you. However, if I was to get something for competition use I would invest the extra dollars in the
combo rack to get a two for one.