REP fitness PR-1050 rack vs Rogue RML3
This is a comparison between the Rep Fitness PR-1050 rack and the Rogue RML3. Follow the links for more details.
RML 3 Rogue Monster lite
What else to consider from Rogue
Overview of the RML3
The
Rogue RML3 is a half
rack from
Rogue that has been inspired by the classic Westside power cage. It comes in black and is made in Columbus, Ohio. This unit saves space and can fill a large establishment with many benches and squatting stations at an affordable price. If you need
to buy a bunch of racks, this might be the option for you.
The
RML3 is 49'' long and 30'' wide. It comes in at a height of 90.375''. The overall footprint comes
to 53''x34''. The stell notes are made from 3x3'' Gauge steel. This
rack is delivered with J CUps, Pin/Pipe safeties, and band pegs
to get you going. As it derives from the Monster lite series it is compatible with the line and provides the Westside hole pattern for your training needs.
Pros of the RML3
A big pro is the price. This is one of the most affordable options out of the Monster lite series which still keeps you in the two upper product ranges of Rogue. If you go any lower in the budget you will have a hard time to get a rack which is either from The MOnster or MOnster Lite series. The Infinity and Echo series just do not get as much attention from Rogue's product development.
Cons of the RML3
The RML 3 is a half
rack so you will have
to look for
plate storage. Otherwise, it will get very crammed
to exercise in there. Compared
to the Monster series you will also have
to wait longer for product upgrades in the future.
Alternatives to the RML3
Alternatives
to the
RML3 are
The
R3 is the
Rogue version of the classic Westside
Barbell Rack. You save another 100$ for about the same real estate of
rack space. Maybe bring your wife out for some dinner instead of buying the bigger
rack to appease her after taking up the floor space in the house.
If you want a full
rack instead of a half
rack for the same amount of money you can go for the
RE4 rack. The
RE4 is part of the
Rogue Echo series
which is the cheapest
to make as it has the least amount of metal. It will do the trick. If you are all for saving money and getting the most of it this might be the
rack for you.
The W4 Garage Gym is a classic from the Rogue portfolio. This will turn any garage into a functioning gym in no time. the of the steel notes have been removed to bolt the W4 system against one wall of your garage. With this, you make some additional savings which can put into equipment instead of rack space.
Overview and review of the REP fitness PR-1050 rack
This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.
Related articles
Overview of the REP PR-1050 Rack $269
The
REP PR-1050 is a short version of the
REP PR-1000. I am a big fan of the design of the
REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage
, and safeties including a rack for under $300. The same goes for the
PR-1050. Some of the specifications of the
PR-1050 are:
-
72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
-
26" depth inside to inside, 44" wide inside to inside
-
2x2" steel
-
Plastic lined j-cups to protect bar knurl
-
2" hole spacing throughout working area
-
1.25" and 2" Pull up bars
-
Numbered uprights every 5th hole
-
Extra bar holders on the front of safeties, great for pressing outside the rack
-
2 Weight horns on rear base for storage and added stability
-
700lb weight capacity
-
400lb pull up bar capacity
-
400lb dip attachment capacity (dip attachment available as an optional upgrade)
This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.
Pros of the REP PR-1050 Rack
-
All in one design
-
Price
-
Short design
If you are looking for something simple and somewhat solid look no further. The
PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.
Cons of the REP PR-1050 Rack
This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the
Omni rack or
PR-5000.
Alternatives to the REP PR-1050 Rack
The
REP PR 1000 is a taller version of the
PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The
PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.
The
Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on
Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.
The
TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.
Conclusion for the REP PR-1050 Rack
If you think that the
PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the
PR-1000 instead.