Rogue RM6 rack vs TITAN plate loaded deltoid machine
This is a comparison between the Rogue RM6 rack and the TITAN plate loaded deltoid machine including pros, cons, and alternatives. Follow the links for more details.
Overview and review of the TITAN plate loaded deltoid machine $479.99
This is an overview of the TITAN plate loaded deltoid machine including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.
Overview of the TITAN Plate loaded deltoid machine
The
TITAN plate loaded deltoid machine is another two in one machine from TITAN. With this machine you can do seated presses and deltoid raises. The machine is solid, but nur overbuilt. Resistance is added by loading
plates on the respective pins. The machine fits standard Olympic
plates. This is a great machine for a home gym with more than average floor space. In a commercial gym you might wan to get two separate machines with their own weight stacks. The full list of features for the
TITAN deltoid machine includes:
- Independent arm movement
- Shoulder press sealed bearings
- Olympic sized plate sleeves
- Adjustable seat height to fit athletes of all sizes
- Square steel tube frame construction
- Shoulder press has (2) sets of stationary handles
- Delt raise has 10-in. forearm pads with fixed handles
- Includes rubber feet for secure contact
- Overall Height (U-Frame Extended Up): 65-in.
- Overall Length: 39-in.
- Overall Width: 35-in.
- Back Pad Dimensions: 18-in x 9.75-in x 2.25-in.
- Seat Pad Dimensions: 10.5-in x 11.25-in x 2.25-in.
- Arm Pad Dimensions: 10-in x 5-in x 1.75-in.
- Sleeve Diameter: 50 mm.
- Weight Sleeve Length: 9.75-in.
- Handle Length: 5.25-in.
- Finish: Powder-Coated Black
- Material: 2-in x 2-in 11-GA Steel
- Weight Capacity: 700 lb.
- Product Weight: 149 lb.
Great machine for anyone who has the space in their backyard or basement gym and does not want to shell out money for two separate machines.
Pros of the TITAN Plate loaded deltoid machine
-
2 in 1 design
-
Price
-
Plate loaded
The two in one design of this machine saves space and cost. This is especially interesting for anyone who wants to but a big home gym for themselves. If your clients are into loading
plates on a machine it might even be for a commercial gym.
As with all TITAN products the
deltoid machine is optimized for price. This means that it undercuts the competition by almost half and therefore makes your dollars last longer.
The fact that this machine is
plate loaded means that you also save on paying for the weight stack that normally comes with machines. If you already have
plates and do not mind loading and loading them in the machine, this is another welcome saving.
Cons of the TITAN plate loaded deltoid machine
-
Plate loaded
-
Build
-
Space requirements
Having a
plate loaded machine is great when you are a single person in a basement. It is also ok in a that has a few people around who know what they are doing. This would be a private gym or dedicated powerlifting and weightlifting gym where the general public feels too intimidated to train. In a commercial gym for the masses you are better off with a weight stack for your machines. This results in fewer opportunities to trip up, the clients are in and out quicker and fewer
plates for the staff to clean up.
This machine is been built with the average make in mind, which also holds true for almost all TITAN products. As TITAN uses as much material as necessary, but not more that makes things cost effective. That does not mean that TITAN has the most stable and durable equipment in the market. Rogue and Eleiko follow the philosophy of overbuilding their products. This means you pay more but your stuff is also bullet proof. This is a other reason why TITAN is a great choice for the average Joe who builds a massive gym. If you are a monster, professional lifter, or run a gym with a crowd of roid rage fanatics, than you need to step up a little.
Alternatives to the TITAN plate loaded deltoid machine
Conclusion for the TITAN plate loaded deltoid machine
This is a great 2 in 1 machine for the spacious home gym and fits right in this TITAN strategy. TITAN has multiple of these
plate loaded machines that downtown things to save time and space. For a commercial gym this machine might be a little too haphazard but for home use it is ideal, as long as your basement, garage, of attic is big enough to take a
rack and a couple of machines.
Overview and review of the Rogue RM6 rack
Price: 2.000 - 2.640
This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster RM6 rack will either be the pride and joy of your home gym or the impressive addition to your gym for the most ambitious lifters. See the details in this article.
What else to consider from Rogue
Overview of the Rogue RM6
The
RM6 is the flagship rack of Rogue. If you
buy a 24' Monster Rig in the racked configuration you basically buy
multiple RM6 with
pull up bars in between them. This is the rack for serious home warriors or small gyms who do not want to compromise.
The
RM6 has a length of 76'' and width of 49''. You can get the rack in three different heights ranging from 90'' through 100'' to 108''. The Footprint comes in at 80'' x 53''. The new keyhole design also makes it easier for you to fit smaller attachments into the
Monster series. You can choose from the following colors for the
RM6:
- Bright blue
- Bright Green
- Burnt Orange
- Dark Blue
- Dark Red
- Gun Metal
- Light Gray
- Rogue Red
- White
- Satin Clear
- Satin Black (Standard)
All of these options come in a medium gloss powder coat. Above this, you have many options to customize the top crossmembers, safeties and
J Cups. The better the options you pick the higher the price. If you go for all the finest it drives the price to 2.640$. Then you have the fanciest
pull-up bars, flip down safeties and
J cups that money can buy from Rogue.
How many clients should the RM6 bring you?
If you think that the
RM6 will bring you 7 -9 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 4.000$ - 5.400$ net new revenue against an investment of 2.000$ - 2.600$. Adjust the numbers for your own gym accordingly.
Pros of the Rogue RM6
This rack gives you a full and a
half rack in one go. With this, you can train more athletes at the same time. If you do not want to train multiple athletes on the
same rack, you can use the
half rack for storage. Another option is to install a
Rhino belt squat Drop in at the back of this rack. This can be a very powerful configuration to attract powerlifters to your gym.
Cons of the Rogue RM6
A lot of people
will argue that this rack is completely overbuilt. The little sisters of the Rogue line, Echo, Infinity and
Monster lite bear this reputation. You can definitely save a lot of money by going with other options. It depends on your needs. For myself, I only want the best to be the best. No one in the market argues that Rogue products are built to last, only price is a concern.
Alternatives to the Rogue RM6
Based on this budget here are some alternatives you might want to consider to the
RM6:
If you do not know exactly how you are going to use the
half rack at the back of the
RM6 you are better of going with an
RM4. Ask yourself whether your gym already has enough storage options for
plates and whether your clients will use a
half rack. Often the answer is that you already have enough storage and clients do not like to use
half racks. Same goes for basement and garage gyms. You can use the saved space for something else. The only disadvantage of this option is that you can not install a
Rhino belt squat in the back of the rack. You can remedy this by buying a racked
Rhino version at a later stage.
The RML is the
Monster Lite version of the
RM6. It gives you the same space and storage options with less sturdy beams. This is more than enough for most applications. If you want to save money and still have a very sturdy rack, this is the option with extra storage and a
half rack at the back.
Conclusion
The RM6 is one of the most overbuilt and yet impressive racks you can get in the market. When you get this you know that you did yourself and your clients proud. Even the biggest athletes will not be able to make this rack rattle.