TITAN Color change plates vs Rogue 6 shooter plates
This is a comparison between the TITAN color change plates and the Rogue 6 shooter plates including pros, cons, and alternatives. It was published first under which titan plates to get. Follow the links for more details.
Overview and review of the Rogue 6 Shooter Olympic plates
Overview of the 6 Shooter plates
The
Rogue 6 shooter plates have been designed for high traffic use in your gym. The plates provide six holes so that it becomes easier to transport them and load them onto the
barbell. This is the type of plate you want in a facility with many beginners to avoid hand injuries. They also come in at a lower cost than most other plates. When these are being abused, your heart won't sink as much as with the other, higher range plates from Rogue. They come in a
hammertone
grey finish.
Weight / Diameter / Thickness / Price per pair
45LB / 448mm / 1.36'' / $156
35LB / 376mm / 1.45'' / $128
25LB / 308mm / 1.45'' / $100
10LB / 228mm / 1.22'' / $48.50
5LB / 195mm / 0.83'' / $32
2.5LB / 162mm / 0.63'' / $23
Available sets
245lb a pair of each at $575
Pros of the 6 Shooter plates
The
Rogue 6 Shooter plates are easy to handle for any level of a lifter. They are also less likely to provide hand injuries as the holes lower the likelihood of getting your gingers between two plates or not being able to pick them up. The design also makes it easier to use the plates for any kind of resistance exercises which are not done with a
barbell. This combined with a relatively low price makes them a good option for starter gyms for their first-time outfit.
Cons of the 6 Shooter plates
These plates are metal and are therefore unforgiving to the floor, humans, and feet when dropped. They are also not ideal for Olympic lifting for the same reason. Many clients in commercial gyms also prefer
urethane over metal as it is easier to handle and feels nicer on the skin.
Alternatives to the 6 Shooter plates
The Urethane version of the
6 Shooter plates are a bit more expensive, but last longer and feel nicer for your clients. This is the way to go if you want to accommodate
to
the masses.
Bumper plates are an alternative which is also lower in price. These plates can be dropped from overhead and are forgiving on surfaces they get in touch with. A disadvantage is that you can not fit as much weight on the
barbell with
bumper plates than with metal.
Olympic plates are the no-nonsense most cost-efficient option you can go for. This is the most weight per $$$ you can obtain from Rogue. The downside is that these plates are not much to look at and are hard to handle.
Overview of the TITAN color change plates
Price $20.95 - $139.99
Color change plates are great for your
Olympic lifting efforts or for micro loading on any kind of lift. Overhead presses and other exercises that do not escalate as quickly as the squat or the deadlift will benefit tremendously from the
colored change plates. They are also great to break through plateaus on your one-repetition maximum and always keep progressing forward even if the weight increase is ever so small. The full specifications of these plates are:
Rubber coated steel with a matte finish
Color-coded for easy identification
Sold in pairs of a full set totaling 37.5-pounds
Plate Diameter: 133.3 mm - 230 mm
Plate Width: 14 mm - 28 mm
Collar Opening: 51 mm
Color-Coded: White 1.25, Green 2.5, Blue 5, and White 10
Material: Rubber Matte Finish
Total Weight: 37.5 lb.
This si a good addition to your gym to keep progressing on every lift on every day. Practical and easy to use.
Pros of the TITAN color change plates
As with all TITAN products, the main headline to buy them is their low price. In addition, the
color-coded change plates also make it easier to directly see which weight you have actually put on your barbell.
Cons of the TITAN color change plates
Cons to the TITAN change plates are:
As TITAN undercuts the market by half they have to cut some corners in their production. Depending on which badge you get the finish can be a little off anything they produce. Especially on precision instruments like change plates that is not the best point to start with.
Alternatives to the TITAN color change plates
The
black change plates cost a little less. If you do like the design better, get these. The
color-coded plates are the better choice in my opinion as they only cost slightly more, but make the handling in the gym a lot easier.
Conclusion for the TITAN color change plates
If you want to save half on a $200 purchase they are the right choice If you want a snug fit on the barbell you might want to go with another vendor.