TITAN X3 squat stand vs Rogue RE3 [Article, Video]
This is a comparison between the TITAN X3 squat stand and the Rogue RE3 rack. Follow the links for more details.
Rogue RE 3 Echo Rack
What else to consider from Rogue
Overview of the RE3
The
Rogue RE3 is a half rack for the athlete on a budget. It comes in black and is manufactured in Columbus Ohio. This is the lowest cost rack stand-alone rack that
Rogue currently offers. It must be bolted to the floor for use.
The
RE3 has a length of 28'' and a width of 47'' this bring the total footprint to 32''x53''. It is made from the 2x2'' 11 Gauge steel notes of the Echo Series and is therefore compatible with the beams and accessories form this product line. The height comes in at 90.375''. It ships with band pegs, a Fat/Skinny pull up bar and J Cups. The pin and pipe safeties have to be ordered additionally with this rack.
This is a compact option for a home gym or a big facility that wants to buy in bulk and use economies of scale in their order.
Pros of the RE3
The biggest pro of this rack is the price. You will get a full rack from Rogue very close to the $500 mark. This is rather the exception than the rule when you buy from one of the best in the market.
Cons of the RE3
The Echo series is one of the product lines of Rogue which has gotten less attention of the last few years in terms of development. If you always want to be up to date and get the newest upgrades, this option might not be for you.
Alternatives to the RE3
Alternatives to the
RE3 are:
The RML 3W is a folding rack alternative that can be put flat to the wall after use. For this, it comes with the necessary equipment to attach it to the wall. This rack cannot be out in the middle of a room but can save you a lot of space.
The
W4 Garage Gym is an out of the box home gym system for the garage where the car is never parked in. The system gets mounted to the wall and also comes in around $500.
The R3 W is the echo version of the foldable Wall Mount Rack. Instead of the 3x3'' 11 Gauge notes you will get the 2x3 Gauge Steel.
Overview and review of the X-3 Squat stand with pull up bar
The TITAN X3 Squat stand will put you back about $490. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500”
Overview of the X3 squat stand
The
X3 is a squat stand which boasts 3x3 steel tubes. It is, therefore, a very sturdy
squat stand compared to other 2x3 or 2x2 options. The X3 comes with Westside spacing in the lower part of the rack to allow for smaller increments on the bench press. The flat foot design saves you bolting it to the floor which makes it a very good option in some home gym scenarios. It also comes with spotter arms. The specifics and features of the
squat stand are:
-
3" x 3" 11 gauge steel uprights
-
Westside hole pattern through bench zone
-
2" hole spacing above and below.
-
1,000 + lb capacity
-
Pair of UHMW lined X-3 JHooks included
-
Double-sided gusset plates
-
Standard 1.25" Pull up bar included
-
Mounted at your preferred height.
-
Pair of X-3 Spotter Arms included
-
Height: 92"
-
Width: 49"
-
Depth: 48"
-
Product Weight: 203 lb
-
Finish: Black Power Coating
-
Floor Space: 16.3 sq ft (49" x 48")
This is as sturdy as they come as far as squat stands go.
Pros of the X3 squat stand
As with all TITAN equipment, the first thing to note is the competitive price. You will have a challenge to find a good quality 3x3
squat stand for the same price. A
squat stand also gives you the ability to drop weight easier than in a power rack. If you prefer the Olympic lifts over powerlifting this might be the better choice for you. A squat stand also saves space and can be easily transported.
Cons of the X3 squat stand
Especially for beginners, you have less protection. The spotter arms are fine and nice, but in practice, safety pins in a full rack are a lot more secure as you won’t miss them. The whole structure is also led likely to tip over if installed correctly. In addition, TITAN is known for inconsistencies on their finish.
Alternatives to the X3 squat stand
For almost the same amount of money, you can get a colored version of the
T3 rack. While the tubes are only 2x3 you will get a full rack in the color of your choice.
Another way to go is to save on the color to have more budget for different size options on the
T3 and maybe even adding some plate holders. The
T3 is available in a short and tall version to adjust the height. For depth, you can choose between 24” and 36”.
The
T3 folding rack saves you about $100 on the X3 and can be installed in your garage. If you only train on the weekends or two days a week, this is a good option so that you can still use the garage or basement for your car/ miscellaneous rubbish you think is important ( I have that stuff in my attic). The savings can be put towards a barbell like the blues city or Atlas bar.
Summary of the X3 squat stand
A great option for anyone planning on a home gym for Olympic lifting or a gym that still has a corner left and does not j ow what to do with it. If you get the
squat stand make sure you can store your plates somewhere separate.