TITAN X3 squat stand vs Rogue Rm6 [Article, Video]
This is a comparison of the TITAN X3 squat stand and the Rogue RM6. Follow the links for more details.
Overview and review of the Rogue RM6 rack
Price: 2.000 - 2.640
This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster RM6 rack will either be the pride and joy of your home gym or the impressive addition to your gym for the most ambitious lifters. See the details in this article.
What else to consider from Rogue
Overview of the Rogue RM6
The
RM6 is the flagship rack of Rogue. If you
buy a 24' Monster Rig in the racked configuration you basically buy
multiple RM6 with
pull up bars in between them. This is the rack for serious home warriors or small gyms who do not want to compromise.
The
RM6 has a length of 76'' and width of 49''. You can get the rack in three different heights ranging from 90'' through 100'' to 108''. The Footprint comes in at 80'' x 53''. The new keyhole design also makes it easier for you to fit smaller attachments into the
Monster series. You can choose from the following colors for the
RM6:
- Bright blue
- Bright Green
- Burnt Orange
- Dark Blue
- Dark Red
- Gun Metal
- Light Gray
- Rogue Red
- White
- Satin Clear
- Satin Black (Standard)
All of these options come in a medium gloss powder coat. Above this, you have many options to customize the top crossmembers, safeties and
J Cups. The better the options you pick the higher the price. If you go for all the finest it drives the price to 2.640$. Then you have the fanciest
pull-up bars, flip down safeties and
J cups that money can buy from Rogue.
How many clients should the RM6 bring you?
If you think that the
RM6 will bring you 7 -9 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 4.000$ - 5.400$ net new revenue against an investment of 2.000$ - 2.600$. Adjust the numbers for your own gym accordingly.
Pros of the Rogue RM6
This rack gives you a full and a
half rack in one go. With this, you can train more athletes at the same time. If you do not want to train multiple athletes on the
same rack, you can use the
half rack for storage. Another option is to install a
Rhino belt squat Drop in at the back of this rack. This can be a very powerful configuration to attract powerlifters to your gym.
Cons of the Rogue RM6
A lot of people
will argue that this rack is completely overbuilt. The little sisters of the Rogue line, Echo, Infinity and
Monster lite bear this reputation. You can definitely save a lot of money by going with other options. It depends on your needs. For myself, I only want the best to be the best. No one in the market argues that Rogue products are built to last, only price is a concern.
Alternatives to the Rogue RM6
Based on this budget here are some alternatives you might want to consider to the
RM6:
If you do not know exactly how you are going to use the
half rack at the back of the
RM6 you are better of going with an
RM4. Ask yourself whether your gym already has enough storage options for
plates and whether your clients will use a
half rack. Often the answer is that you already have enough storage and clients do not like to use
half racks. Same goes for basement and garage gyms. You can use the saved space for something else. The only disadvantage of this option is that you can not install a
Rhino belt squat in the back of the rack. You can remedy this by buying a racked
Rhino version at a later stage.
The RML is the
Monster Lite version of the
RM6. It gives you the same space and storage options with less sturdy beams. This is more than enough for most applications. If you want to save money and still have a very sturdy rack, this is the option with extra storage and a
half rack at the back.
Conclusion
The RM6 is one of the most overbuilt and yet impressive racks you can get in the market. When you get this you know that you did yourself and your clients proud. Even the biggest athletes will not be able to make this rack rattle.
Further reading
Overview and review of the X-3 Squat stand with pull up bar
The TITAN X3 Squat stand will put you back about $490. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500
Overview of the X3 squat stand
The
X3 is a squat stand which boasts 3x3 steel tubes. It is, therefore, a very sturdy
squat stand compared to other 2x3 or 2x2 options. The X3 comes with Westside spacing in the lower part of the rack to allow for smaller increments on the bench press. The flat foot design saves you bolting it to the floor which makes it a very good option in some home gym scenarios. It also comes with spotter arms. The specifics and features of the
squat stand are:
-
3" x 3" 11 gauge steel uprights
-
Westside hole pattern through bench zone
-
2" hole spacing above and below.
-
1,000 + lb capacity
-
Pair of UHMW lined X-3 JHooks included
-
Double-sided gusset plates
-
Standard 1.25" Pull up bar included
-
Mounted at your preferred height.
-
Pair of X-3 Spotter Arms included
-
Height: 92"
-
Width: 49"
-
Depth: 48"
-
Product Weight: 203 lb
-
Finish: Black Power Coating
-
Floor Space: 16.3 sq ft (49" x 48")
This is as sturdy as they come as far as squat stands go.
Pros of the X3 squat stand
As with all TITAN equipment, the first thing to note is the competitive price. You will have a challenge to find a good quality 3x3
squat stand for the same price. A
squat stand also gives you the ability to drop weight easier than in a power rack. If you prefer the Olympic lifts over powerlifting this might be the better choice for you. A squat stand also saves space and can be easily transported.
Cons of the X3 squat stand
Especially for beginners, you have less protection. The spotter arms are fine and nice, but in practice, safety pins in a full rack are a lot more secure as you won’t miss them. The whole structure is also led likely to tip over if installed correctly. In addition, TITAN is known for inconsistencies on their finish.
Alternatives to the X3 squat stand
For almost the same amount of money, you can get a colored version of the
T3 rack. While the tubes are only 2x3 you will get a full rack in the color of your choice.
Another way to go is to save on the color to have more budget for different size options on the
T3 and maybe even adding some plate holders. The
T3 is available in a short and tall version to adjust the height. For depth, you can choose between 24” and 36”.
The
T3 folding rack saves you about $100 on the X3 and can be installed in your garage. If you only train on the weekends or two days a week, this is a good option so that you can still use the garage or basement for your car/ miscellaneous rubbish you think is important ( I have that stuff in my attic). The savings can be put towards a barbell like the blues city or Atlas bar.
Summary of the X3 squat stand
A great option for anyone planning on a home gym for Olympic lifting or a gym that still has a corner left and does not j ow what to do with it. If you get the
squat stand make sure you can store your plates somewhere separate.