Overview and review of the Reflex flat bench
The Reflex flat bench arm kit comes in at $1674 and is a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".
What else to consider from Rogue
Most popular Rogue bench
This is an overview of the most popular Rogue benches based on views and click throughs for purchase on Marathon-Crossfit.com in 2020. If you want to dig deeper on the details of the data you can read what were the most popular rogue products in 2020.
These were the most popular rogue benches on
Marathon-CrossFit.com in 2020. The rankings were as followed:
-
-
-
-
-
The
Rogue AB3 is the most expensive bench you can get from Rogue. In return, you get a monster of a bench that can do incline and decline bench presses. I am not a huge fan of decline bench presses, especially for a home gym where you might pin yourself without any help around. Therefore I lean more towards the
AB2.
You can read the full review of the AB3 by following this link.
The
Rogue adjustable bench 2.0 is a cheaper design than the
AB2 which does the same thing. I personally prefer the pin and lock system of the
AB2 as it is sturdier and leaves you with less risk of catching your fingers in it. The
adjustable bench 2.0 is easier to adjust but more likely to slip a notch during exercise when not put in place correctly or catch a finger in the mechanics. You can read the full review of the
Rogue adjustable bench 2.0 via this link.
Overview of the Reflex Flat bench
The
reflex flat bench is the sturdy design of the reflex line applied to a
regular flat bench setup. You will get a solid piece of equipment with little moving parts apart from the barbell. This is a good setup for your big athletes who are moving big weights. The specifications of the
Reflex flat bench are:
-
Combination of 3×3 11ga. & 3/16-walled fully Welded Tubular steel construction.
-
Powder Coated finish.
-
Plastic lined weight bar saddles.
-
Adjustable Saddles w/ 11 positions.
-
Weight storage.
-
7 position adjustable safeties.
-
Weight storage.
-
1in high-density foam pad.
-
Weight 167 - 470LB
-
Length 60” - 70”
-
Width 48”
-
Height 58” - 64”
The
reflex flat bench will stay where you place it and go nowhere. This is especially good when you want to ensure the same setup each and every time you
bench.
Pros of the Reflex Flat bench
A sturdy setup that keeps you safe, even when moving big weights around. Can also be used as central plate storage in the middle of multiple racks.
Cons of the Reflex Flat bench
Single-purpose use and not a lot of flexibility to change. Needs more floor space than other solutions you might come up with for the bench press.
Alternatives to the Reflex Flat bench
The
reflex competition bench comes in only slightly more expensive than the
flat bench version. In return, you get an IPF approved machine to practice for the real thing. Of you are considering a
bench press setup like this you might as well spend the few extra to get the competition version.
The
reflex decline bench press is the piece of equipment that I would get if I had the floor space left. Out of the different
bench press variations, the decline is the one I feel most uncomfortable with when done on a free-standing
bench. The
reflex decline would address this.
The
AB3 bench is Rogues portable
bench which can be used for flat, incline and decline setups. As it is on rolls it might not be as stable as the Reflex series, but if you are not a beast, this will be more than sufficient to get your work done.
Summary for the Reflex Flat bench