REP fitness black bumper plates vs color bumper plates

This is a comparison between the REP fitness black bumper plates and the REP fitness color bumper plates. Follow the links for more details.

Overview and review of the REP fitness color bumper plates

This is an overview of the REP fitness color bumper plates including pros, cons, and alternatives. The original was published under which plates to buy from rep fitness. Follow the links for more details.

REP color bumper plates $49

The REP color bumper plates are a colored option of the REP black bumper plates. What I like about these bumpers is that they are affordable and very close in price to the standard black. If you are torn between black and colored bumpers for the same price I definitely recommend going for the colored ones. Way more fun to train with. The full specifications are:

Plate Sets:

160 lb - (2)Each 45-25-10
210 lb - (2)Each 45-35-25
230 lb - (2)Each 45-35-25-10
260 lb - (2)Each 45-35-25-15-10
370 lb - (2)Each 55-45-35-25-15-10

10 lb - Gray
15 lb - Black (from our regular black plates)
25 lb - Green
35 lb - Yellow
45 lb - Blue
55 lb - Red

A very affordable way to get colored plates into your home gym as other options might break the budget.

Pros of the REP color bumper plates

Pros of the REP color bumper plates:

Price
Color
Very forgiving
Can be used outdoors

The best thing about the REP-colored bumper plates is the decision of REP to not charge you a lot extra if you prefer color over black. That is great as other vendors go for a different policy on this one or do not even stock anything but black plates. So if you want colored plates on a budget, then these are a good choice.

Bumper plates are very forgiving on the lifter, floor, and equipment. They are the least likely to injure someone or cut into the floor and rack you are using. If you have a lot of beginners around or do not know who and how the plates will be used at all times, try stocking more bumpers than iron plates. Iron is great, but it is a lot easier to hurt yourself with these plates.

The last bonus of these plates as that they can be used outdoors. They won't deform and if they get dirty they are easy to clean.

Cons of the REP color bumper plates

The cons of the REP colored bumper plates are:

Price compared to iron
Sleeve space
High bounce
Stain easier
Suboptimal for oly lifts
Can be awkward to pick up

The main con for bumper plates is that they take up more sleeve space than iron plates. They are usually also a little more expensive than Iron plates per kilogram. With bumper plates, you usually max out the barbell somewhere around 180kg - 220kg depending on the barbell you use and how you stack the plates. If you are a serious powerlifter that regularly works with 200kg or more you need iron plates. But if you are shopping for plates as a powerlifter, you probably are already well aware of that as you did not step into the gym yesterday.

These bumper plates have a higher bounce than specific competition plates. If you are only lifting a lot, especially heavy, this can become annoying. Again, if you are an experienced OLy lifter you will know how to handle a bouncing bar, but it would be beneficial if it did a little less of that when you do 100s and 1000s of reps. In that case, get plates with a low bounce that usually cost a little more like the REP sports plates or competition plates.

Colored plates pick up blemishes and stains more than simple black plates. If you do not want to have to clean your plates as often to keep them looking nice then black plates are the better choice.

As these plates do not have a metal core they tend to spin a little more in an unpredictable way for oly lifts or not at all. That can mess with the dynamic of an oly lift and lead to lower lifts. However, this is minor and only relevant to top athletes.

Bumper plates are generally a little more awkward to pick up from the floor than iron plates as you get less grip. Some bumper plates have an added little lip to get grip on which these do not provide. Again minor, but we like to split hairs here.

Alternatives to the REP color bumper plates

Alternatives to the REP bumper plates are:

If you want to play it safe, especially for a commercial gym, then you can also get a stack of black bumper plates. Not everyone likes to train with colored plates, even though I think they are the best thing since sliced bread.

If you want to take it up a notch you can get the REP competition bumpers instead. They will have a lower bounce and weight tolerance and are therefore more precise instruments than the colored bumpers. They also have a metal core which makes them more centered during oly lifts. The big con is that they can cost up to triple what a single bumper plate costs.

Rogue fitness also offers a line of colored bumper plates if you are leaning more towards equipping your gym Rogue themed. These plates are also imported so the patriotism card does not apply as much as with some other products from Rogue. If you want to go for American-made plates you can order the Rogue deep-dish plates.

The machined iron plates are high precision iron plates from Rogue with a lower tolerance compared to regular iron plates. This means you pay a little extra so that these plates are being produced with lower fault tolerance to weigh exactly what it states in the plate.

The TITAN color bumpers are a low-budget option. Especially if you want to build your entire gym as cheap as possible without ransacking Facebook groups and Craigslist you should pay TITAN a visit.

Conclusion for the REP color bumper plates

These are a good option to get color in our home or commercial gym at a reasonable price if you want to.

Overview and review of the REP fitness black bumper plates

This is an overview of the REP fitness black bumper plates including pros, cons, and alternatives. The original was published under which plates to buy from rep fitness. Follow the links for more details.

REP Black Bumper plates $49

The REP black bumper plates are the standard option you can find from most vendors around. These plates have a good price per plate, can be used outdoors, and fit on most barbells. This is the workhorse plate for the home or in a commercial gym. If you are not sure what to buy, you can not go wrong with these. The full specifications are:

160 lb - (2)Each 45-25-10
190 lb - (2)Each 45-25-15-10
210 lb - (2)Each 45-35-25
230 lb - (2)Each 45-35-25-10
250 lb - (4) 45 (2) Each 25-10
260 lb - (2)Each 45-35-25-15-10
370 lb - (6) 45 lb & (2)Each 25-15-10
Superior craftsmanship and design. Steel inserts with hooks molded into the bumper plates increase durability versus older designs with brass inserts.
Extra thick 10 lb plates are the best on the market, and highly resistant to bending
Low bounce. Some recycled rubber bumper plates will bounce very high and make you chase the bar around. Not ours.
Thin profile. With a good Olympic bar, you can fit 515lbs of our bumper plates on the bar.
Factory tested to withstand over 12,000 drops from a height of 8 ft.
Used in both commercial and home gyms all over the world
3% Tolerance

Solid plates for any use scenario. Not too expensive and not too cheap to get you where you want to go with your fitness.

Pros of the REP Black Bumper plates

Pros of the REP Black bumper plates are:

Value for money
Goes with anything
Can be used outdoors
Very forgiving on the user
Very forgiving on the floor

Black bumper plates are always a safe bet. Especially for someone who is not incredibly strong or wants to break world records. They are reliable. If Black bumper plates get dirty it is not that bad, as the dirt will not show up as much on the black. A decent black color also goes with most other equipment in any given gym as it is often black or grey.

Bumper plates are also good as they can be dropped from overhead without damaging the plates, the lifter, floor, or equipment. Bumper plates are very forgiving and ideal for any beginner or intermediate lifter. They can also be used outdoors as they take better to rain and sand than other, pricier plates.

Cons of the REP Black Bumper plates

Cons of the REP black bumper plates are:

Sleeve space
High bounce
Can get very hot
Balance
Can be awkward to pick up
Higher fault tolerance

The biggest con of bumper plates is that they take up more space than iron and competition plates on the barbell. If you lift very heavy regular bumper plates usually max out the sleeves of the barbell somewhere around 180kg to 220kg depending on how you stack the plates. If you are a serious powerlifter or want to save storage space in your commercial gym you are better off getting iron plates.

If you use these plates mainly for Olympic lifting you have to keep in mind that they are louder and bounce more than competition plates. If you want to get through a proper snatch workout in the least amount of time that can actually be quite annoying. A minor thing, but still worth considering.

These plates are also balanced differently compared to competition plates. As they have no metal core ring they spin differently during Olympic lifts than bumper plates. A good lifter will still lift heavy weight with these, but if you are entering micro differences you might want to for the competition plates instead.

As they are black rubber they might not be the ideal plates to be used outdoors in a very hot climate. Again, something minor, but if you burn your hand on a very hot bumper once you know what I am talking about. Higher quality plates take a little better to heat and do not absorb it as fast. Different color also helps.

These bumper plates have a higher fault tolerance than the competition and precision plates. This means it is more likely that the plate you are getting does not exactly weigh what it says on the plate. Calibrated plates are the best way to remedy this. Here the plates are weighed at the end of the production process and then adjusted with a little metal insert to be as precise as possible. This production step also makes them more expensive than bumpers or regular iron plates.

Alternatives to the REP Black Bumper plates

Alternatives to the REP BUmper plates are:

If you want something a bit more precise and with a color you can also get the REP competition plates. These plates are made to competition specifications and are therefore produced with a lower tolerance rate. They also have a little lip which makes them easier to pick up from the ground.

The REP-colored bumper plates are a good alternative if you want color in your life instead of simple black. The nice thing is that they are very close in price to the regular black bumper plates.

The Rogue fleck plates are a nice hybrid between black rubber plates and colored plates. The black plates are being infused with color during the production process to make them look like checkered animals. If you want your gym to be hip and different, this is the plate to make that statement without reaching into the Avengers or food-themed weight plates.

Rogue's machined iron plates are a good option for someone who wants precise iron plates for their ambitious home gym. These are a particularly good choice for any powerlifters that need to stack a lot of iron on the plate to still make gains.

The TITAN bumper plates are the cheap version between Rogue, REP, and TITAN if you want to get the most weight for your buck from a decent vendor, then TITAN is the way to go.

Conclusion for the REP Black Bumper plates

The rep black bumper plates are a solid choice when you are confused and just want to get going. They are also a good choice for a commercial gym that wants to play things safe.