REP fitness competition plates vs black bumper plates

This is a comparison between the REP fitness competition bumpers and the REP fitness black bumper plates. Follow the links for more details.

Overview and review of the REP fitness black bumper plates

This is an overview of the REP fitness black bumper plates including pros, cons, and alternatives. The original was published under which plates to buy from rep fitness. Follow the links for more details.

REP Black Bumper plates $49

The REP black bumper plates are the standard option you can find from most vendors around. These plates have a good price per plate, can be used outdoors, and fit on most barbells. This is the workhorse plate for the home or in a commercial gym. If you are not sure what to buy, you can not go wrong with these. The full specifications are:

160 lb - (2)Each 45-25-10
190 lb - (2)Each 45-25-15-10
210 lb - (2)Each 45-35-25
230 lb - (2)Each 45-35-25-10
250 lb - (4) 45 (2) Each 25-10
260 lb - (2)Each 45-35-25-15-10
370 lb - (6) 45 lb & (2)Each 25-15-10
Superior craftsmanship and design. Steel inserts with hooks molded into the bumper plates increase durability versus older designs with brass inserts.
Extra thick 10 lb plates are the best on the market, and highly resistant to bending
Low bounce. Some recycled rubber bumper plates will bounce very high and make you chase the bar around. Not ours.
Thin profile. With a good Olympic bar, you can fit 515lbs of our bumper plates on the bar.
Factory tested to withstand over 12,000 drops from a height of 8 ft.
Used in both commercial and home gyms all over the world
3% Tolerance

Solid plates for any use scenario. Not too expensive and not too cheap to get you where you want to go with your fitness.

Pros of the REP Black Bumper plates

Pros of the REP Black bumper plates are:

Value for money
Goes with anything
Can be used outdoors
Very forgiving on the user
Very forgiving on the floor

Black bumper plates are always a safe bet. Especially for someone who is not incredibly strong or wants to break world records. They are reliable. If Black bumper plates get dirty it is not that bad, as the dirt will not show up as much on the black. A decent black color also goes with most other equipment in any given gym as it is often black or grey.

Bumper plates are also good as they can be dropped from overhead without damaging the plates, the lifter, floor, or equipment. Bumper plates are very forgiving and ideal for any beginner or intermediate lifter. They can also be used outdoors as they take better to rain and sand than other, pricier plates.

Cons of the REP Black Bumper plates

Cons of the REP black bumper plates are:

Sleeve space
High bounce
Can get very hot
Balance
Can be awkward to pick up
Higher fault tolerance

The biggest con of bumper plates is that they take up more space than iron and competition plates on the barbell. If you lift very heavy regular bumper plates usually max out the sleeves of the barbell somewhere around 180kg to 220kg depending on how you stack the plates. If you are a serious powerlifter or want to save storage space in your commercial gym you are better off getting iron plates.

If you use these plates mainly for Olympic lifting you have to keep in mind that they are louder and bounce more than competition plates. If you want to get through a proper snatch workout in the least amount of time that can actually be quite annoying. A minor thing, but still worth considering.

These plates are also balanced differently compared to competition plates. As they have no metal core ring they spin differently during Olympic lifts than bumper plates. A good lifter will still lift heavy weight with these, but if you are entering micro differences you might want to for the competition plates instead.

As they are black rubber they might not be the ideal plates to be used outdoors in a very hot climate. Again, something minor, but if you burn your hand on a very hot bumper once you know what I am talking about. Higher quality plates take a little better to heat and do not absorb it as fast. Different color also helps.

These bumper plates have a higher fault tolerance than the competition and precision plates. This means it is more likely that the plate you are getting does not exactly weigh what it says on the plate. Calibrated plates are the best way to remedy this. Here the plates are weighed at the end of the production process and then adjusted with a little metal insert to be as precise as possible. This production step also makes them more expensive than bumpers or regular iron plates.

Alternatives to the REP Black Bumper plates

Alternatives to the REP BUmper plates are:

If you want something a bit more precise and with a color you can also get the REP competition plates. These plates are made to competition specifications and are therefore produced with a lower tolerance rate. They also have a little lip which makes them easier to pick up from the ground.

The REP-colored bumper plates are a good alternative if you want color in your life instead of simple black. The nice thing is that they are very close in price to the regular black bumper plates.

The Rogue fleck plates are a nice hybrid between black rubber plates and colored plates. The black plates are being infused with color during the production process to make them look like checkered animals. If you want your gym to be hip and different, this is the plate to make that statement without reaching into the Avengers or food-themed weight plates.

Rogue's machined iron plates are a good option for someone who wants precise iron plates for their ambitious home gym. These are a particularly good choice for any powerlifters that need to stack a lot of iron on the plate to still make gains.

The TITAN bumper plates are the cheap version between Rogue, REP, and TITAN if you want to get the most weight for your buck from a decent vendor, then TITAN is the way to go.

Conclusion for the REP Black Bumper plates

The rep black bumper plates are a solid choice when you are confused and just want to get going. They are also a good choice for a commercial gym that wants to play things safe.

Overview and review of the REP fitness competition plates

This is an overview of the REP fitness competition bumper plates including pros, cons, and alternatives. The original was published under which plates to buy from rep fitness. Follow the links for more details.

Rep competition bumper plates $125

The competition bumper plates are the crown jewel of any vendor's plate lineup. They combine color coding with high-quality rubber to be bounced from overhead and an inner metal disc for stability during the clean and jerk and snatch. The REP fitness competition plates are no exception to this design and are a solid option for someone who has high standards but does not want to lose a leg and an arm on a budget to obtain the standard. The full specifications for these bumpers are:

Low Bounce
Zinc Coated Steel Disc Insert
Collar Opening: 50.5mm
+/- 10 grams of claimed weight
450mm Diameter (IWF Standard)
Shore Durometer Ratings: 92 ShA
Follow international color standards (Red/25kg, Blue/20kg, Yellow/15kg, Green/10kg)
5-year warranty on all plates.
Factory tested to 30,000+ drops.

Plate Thicknesses:

Green - 1 3/8"
Yellow - 1.6"
Blue - 2 1/8"
Red - 2.6"

Plate Sets:

90 kg set (2)Each 20-15-10 Plates
110 kg set (2)Each 25-20-10 Plates
120 kg set (2)Each 25-20-15 Plates
140 kg set (2)Each 25-20-15-10 Plates

The good thing about these bumpers is their price. If you don't mind imported plates then this is a good option to save on one of your major items on your shopping list for your home gym or commercial gym.

Pros of the Rep competition bumper plates

The pros of the REP fitness competition bumper plates are:

Price compared to other vendors
Low bounce
High durability
Color coding

When you are considering buying these plates you are most likely very dedicated to your hobby or sport. The direct comparable competition of these plates is the Rogue Competition bumpers and the Eleiko competition bumpers. Both of these are certified by the International weightlifting federation to be used in their competitions to count towards qualifying for the Olympic games or other events regulated by the IWF. Based on this I think these plates are a good option for a dedicated hobby lifter. If you are a professional and want to do everything you possibly can to simulate competition as close as possible in your training I would save a little more and get the Eleiko or Rogue plates depending on how you fit out the entire gym. The cost difference will be substantial, but can also be very motivating for you to do well with the hard-earned equipment.

These plates also have a very low bounce which is a feature of the high-end bumper plates. When you get cheaper ones without a metal insert disc they will bounce higher. If you are training in a confined space or with a very heavy-weight (100kg or more overhead) I would consider upgrading to competition plates for safety and convenience. Not a must, but definitely a great nice to have.

These plates have higher durability than regular bumper plates as they are less likely to come apart at the hole where the sleeve of the barbell inserts. The only downside is that they are not really fit to be sued outdoors as the metal discs will start to corrode. If you want outdoor plates, get the cheapest bumpers possible and just replace them as they will suffer a lot anyway.

The color coding is cool and fun when you are training. I was happy when I got my Rogue color-coded training plates even though I did not want to buy them at first but needed to because of availabilities. Gives your training a different level of seriousness.

Cons of the Rep competition bumper plates

The cons of the Rep competition bumper plates are:

Price compared to other plate options
Metal disc
Busy design
Not IWF approved

The main argument against competition bumper plates is their price per kilogram. Most people will do more than fine with getting bumper plates or iron plates. If you mainly do powerlifting movements, don't bother with bumpers and get iron plates. They are cheap and you can load up your barbell to the brim. If you are planning to train Crossfitting style, then bumper plates are a good option. For commercial uses, it really depends on what you want to convey to your clients. Gyms which a huge floor place will be best advised to get the cheapest per kilogram they can possibly get their hands on unless they are a collegiate gym flush with cash. Boutique gyms and CrossFit boxes should take into consideration that your dedicated clients will definitely know whether you bought the cheap stuff or the good equipment for your members. I would not be too pleased to exercise on York barbells when I am forking more than$200 a month over to you for my membership.

The metal disc is a plus for stability and balance on heavy lifts. It is not great when you work with axle bars or want to use the plates outdoors. In this case, simple bumper plates are better. Don't use iron plates outdoors. They will chip, rust, and rack anything you have mounted them on.

This is a personal style question, but I personally think these competition bumpers are very busy. They would look cooler if REP fitness just put "REP" on them like with their racks. Here Eleiko and Rogue win in my book with a less busy design. But that is just me when I would fork out extra money for something nice I would also like it to be as pleasing on the eye as possible.

If you are preparing for international competitions, you will use different plates. If simulation of big events is what you are after, bite the bullet and save a little more to get ELeiko or Rogue.

Alternatives to the Rep competition bumper plates

Alternatives to the REP competition bumper plates are:

REP bumper plates
REP Iron plates
Rogue competition plates
Eleiko competition plates

The clue is in the name. If you do not compete in Crossfit or Olympic weightlifting the REP bumper plates or Iron plates will do more than fine depending on whether you drop them from overhead or not.

The Rogue competition plates and Eleiko competition plates are very similar in design and function but come at a higher price rate. In return, you are using equipment that got the blessing from the IWF to be used in their competitions.

Conclusion for the Rep competition bumper plates

These are great plates for a dedicated enthusiast in Crossfit or Olympic weightlifting for their home gym or a boutique gym that wants to show their clients that they take them seriously while not shelling out the money for a full Eleiko or Rogue setup. Athletes and collegiate gyms are probably better off opting for the Eleiko and Rogue plates, as long as the budget allows. Gyms with big floor space and a lot of plate trees to fill should immediately look at the other end of the price scale.