REP fitness Excalibur stainless steel bar vs Sabre barbell

This is a comparison between the REP fitness stainless steel Excalibur bar and the REP fitness Sabre barbell. Follow the links for more details.

Overview and review of the REP fitness Sabre barbell

This is an overview of the REP fitness Sabre barbell including the pros, cons, and alternatives. This article was originally posted in which barbell to buy from REP Fitness. Follow the links for more information.

Rep Sabre Bar $179

The REP sabre bar is what I would recommend to someone who walks up to me and says "I want a decent barbell, but it shouldn't cost much" and does not provide me with any extra information about what they want to use it for. The price point is good and you get a decent barbell that you can use for several lifts. It is not for the professional powerlifter and weightlifter, but this population is smaller than the industry wants you to believe. The full specifications of this barbell are:

150k tensile strength
1000 lb rating
28.5mm (25 mm women's) diameter
20kg length 87.4"
15kg length 79.13"
Zinc coating
High-performance ball-bearing sleeve design.
Dual knurl markings.
No center knurl on women's barbell. Men's barbell has an option with center knurl or without.
1-year warranty

This is a good bar if you want to build your home gym for $500 to $1000 including plates rack and everything else. It still functions as a proper barbell, without being fancy on any of the specific features. Also a good buy in bulk for a commercial gym that does not specialize in powerlifting or weightlifting.

Pros of the Rep Sabre Bar

The pros of the REP fitness Sabre bar are:

Price point
All-around design
No extra features
Warranty

This barbell is simple and to the point. Noting fancy but still better than an axle bar or the basic barbell model from REP fitness. This barbell has a zinc coating against rust and is 28.5mm in diameter which is right between weightlifting and powerlifting standards. Compared to the basic barbell from REP fitness it also comes with a warranty

Cons of the Rep Sabre Bar

The cons of the REP Sabre bar are:

Imported
No bearing
No aggressive knurl
No center knurl

As you are getting one of the lower range models of REP fitness with this barbell you will also get nothing fancy on the extras. Each feature has been stripped down to the bare minimum will you still get a warranty. Good for your purse and decent for your experience.

Alternatives to the Rep Sabre Bar

Alternatives to the REP Sabre bar are:

The black sabre bar is the same barbell with the exception that a black coat has been applied. If you want to spice things up a little with black color, then this is the bar to get instead of the sabre basic model.

The Rogue Ohio bar would be the equivalent in the Rogue portfolio to the REP fitness sabre bar. This is the basic barbell that Rogue started their vast portfolio. This leaves you with more options for individualizing your barbell than with REP fitness, but the base model comes at a higher price than the sabre bar.

The Rogue Echo bar is Rogue's approach to making a barbell as cheap as possible. This is the bar they advertise to be taken into the field by the military as it won't hurt that much if it gets abused based on the price per item. If you want to go as low as possible on the sticker price.

The TITAN Atlas bar is TITAN fitness's take on a full barbell at the lowest possible price. If you want to build your entire home gym as cheap as possible with new equipment, then they are probably the best address to get in touch with in the US. The only downside is that they need to cut some corners on service to make these low prices possible.

Conclusion for the Rep Sabre Bar

The REP Sabre bar is a solid barbell for anyone who wants to optimize their budget and still wants a minimal warranty with the barbell. If i owned a gym that had a lot of average strength clients, then this would be the barbell I would buy in bulk.

Overview and review of the REP fitness Excalibur stainless steel bar

This is an overview of the REP fitness stainless steel Excalibur bar including the pros, cons, and alternatives. This article was originally posted in which barbell to buy from REP Fitness. Follow the links for more information.

Rep Excalibur Stainless steel $349

The Excalibur stainless steel barbell from REP takes one of their simpler designs and beefs it up with the stainless steel treatment. It is a solid barbell, but not my favorite option in the line up as I think it takes too many compromises at too high a price tag. The full specifications of this barbell are:

28.5mm diameter
Length: 87.4"
20 kg (45lb) or 15kg (35lb) option
1500 lb static rating
215k tensile, 205k yield
Bushing sleeve construction
Very mild ribbing on sleeves to keep plates in place
No Center Knurl
Stainless Steel
Medium/Deep Knurl
Dual Knurl Markings - Powerlifting and Weightlifting
5 year warranty

This bar neither has an aggressive knurl or bearing sleeve construction for a better spin. More than $300 in the REP barbell portfolio is a good bit of money for a bar that does not really know what it wants to be. To top it off there is also no center knurl. You pay a premium for the stainless steel without actually addressing any specific Oly lift or powerlifting needs.

Pros of the Rep Excalibur Stainless steel

The pros of the Excalibur Stainless steel barbell are:

Stainless steel
Price
Will not offend anyone

The main thing this barbell has going for itself is that it is stainless steel and therefore will not rust as quickly as other barbells which are not. Especially if you are training in a hot and humid climate you should look for stainless steel to get the most out of barbell's life span.

The price for this barbell is good considering that it is stainless steel. But this can also be said for the other stainless steel barbells out of the REP fitness portfolio which in my opinion provide a clearer profile of what needs they want to cover rather than not making a decision of whether they are going to be an all-round barbell, powerlifting, or weightlifting barbell.

A good thing about this barbell is that it will not offend anyone if you buy it in bulk for your gym. The knurling is mild, no center knurling means less rubbing off the back or shins and no bearing means that it won't spin too much for people who only use it for the squat, bench press, and deadlift.

Cons of the Rep Excalibur Stainless steel

The cons of the Excalibur stainless steel are:

No aggressive knurling
No bearing
Imported
No color options

For a barbell from a low price vendor for $300 i personally think you should not spend the money without deciding for a clear use profile of your bar. If you want an all-around barbell you can save yourself $100 to $150 by going for the sabre bar or the REP basic bar. In the $300+ range I would make a clear decision for whether you will be using the barbell mainly for powerlifting or oly lifting and then get either an aggressive knurl bar or one that goes all out on bearing and whip. Why compromise at the upper end of the price spectrum of a vendor?

One big con for patriots will be that this barbell is not being sourced and produced in the United States. If you have problems with that and want to keep the money and the jobs as local as possible then Sorinex and Rogue fitness are better options to do so. These brands also have overseas products in their portfolio but take pains to keep as much of their production and supply chain local to the United States.

Another thing that REP fitness has not figured out yet are color options. While Rogue fitness and TITAN fitness have applied Cerakote coatings to their Ohio bar and Blues city barbell lineup, REP fitness is lagging behind and only offers the Sabre bar in color for now. I am sure they will catch up, but if you want the most flexibility in terms of the material of the sleeves and which colors to go with then Rogue fitness is the better option. What REP fitness lacks in the color department for barbells they make up for in the rack department as here you have more options to choose and customize the color of each single upright.

Alternatives to the Rep Excalibur Stainless steel

If you like the middle of the road approach in the design of the Excalibur bar I would also make the price middle of the road and opt for the Excalibur bar as a non-stainless steel option. If you are outfitting a Crossfit gym in bulk, this is probably a good barbell to choose from as the design is reliable and works in many directions. For a home gym I would possibly not recommend it as ou can treat yourself for the only purchase you are possibly going to make for the next couple of years in the barbell department.

REP Gladiator MX barbell comes in at a similar price to the Excalibur stainless steel but makes a decision to be a better all-around barbell by providing bearing instead of bushing sleeves. If you will be mainly lifting overhead in your home gym or you are trying to build an oly lifting section in your commercial gym, then this is the better option than the Excalibur stainless steel.

The Rogue Chan bar is in my opinion the best hybrid bar between powerlifting and weightlifting that Rogue has to offer. It beaks this up with high tensile strength and an interesting design to keep you motivated. The only downside is that it is rarely in stock and hard to grab. That is why I have a Rogue Ohio power bar at home instead.

The TITAN Atlas bar is the bread and butter barbell model from TITAN without any color options. If you are looking to optimize for the budget this is it. As it is a fairly simple bar you are less exposed to the risk of the looser quality controls which TITAN applies to their products to offer them at the lowest possible cost to you.

Conclusion for the Rep Excalibur Stainless steel

The Excalibur stainless steel bar is a good idea, but too Vanilla for my personal tastes for a bar in this price range. Get something specific to your needs when you shell out more than $300 on a barbell or try to drive down cost as much as possible for an all-around compromise in my opinion. Spending a lot of money on a compromise is usually not a good road to take for being happy with your equipment.