REP fitness Gladiator WL barbell vs Excalibur stainless steel bar

This is a comparison between the REP fitness Gladiator WL bar and the REP fitness Excalibur stainless steel bar. Follow the links for more details.

Overview and review of the REP fitness Excalibur stainless steel bar

This is an overview of the REP fitness stainless steel Excalibur bar including the pros, cons, and alternatives. This article was originally posted in which barbell to buy from REP Fitness. Follow the links for more information.

Rep Excalibur Stainless steel $349

The Excalibur stainless steel barbell from REP takes one of their simpler designs and beefs it up with the stainless steel treatment. It is a solid barbell, but not my favorite option in the line up as I think it takes too many compromises at too high a price tag. The full specifications of this barbell are:

28.5mm diameter
Length: 87.4"
20 kg (45lb) or 15kg (35lb) option
1500 lb static rating
215k tensile, 205k yield
Bushing sleeve construction
Very mild ribbing on sleeves to keep plates in place
No Center Knurl
Stainless Steel
Medium/Deep Knurl
Dual Knurl Markings - Powerlifting and Weightlifting
5 year warranty

This bar neither has an aggressive knurl or bearing sleeve construction for a better spin. More than $300 in the REP barbell portfolio is a good bit of money for a bar that does not really know what it wants to be. To top it off there is also no center knurl. You pay a premium for the stainless steel without actually addressing any specific Oly lift or powerlifting needs.

Pros of the Rep Excalibur Stainless steel

The pros of the Excalibur Stainless steel barbell are:

Stainless steel
Price
Will not offend anyone

The main thing this barbell has going for itself is that it is stainless steel and therefore will not rust as quickly as other barbells which are not. Especially if you are training in a hot and humid climate you should look for stainless steel to get the most out of barbell's life span.

The price for this barbell is good considering that it is stainless steel. But this can also be said for the other stainless steel barbells out of the REP fitness portfolio which in my opinion provide a clearer profile of what needs they want to cover rather than not making a decision of whether they are going to be an all-round barbell, powerlifting, or weightlifting barbell.

A good thing about this barbell is that it will not offend anyone if you buy it in bulk for your gym. The knurling is mild, no center knurling means less rubbing off the back or shins and no bearing means that it won't spin too much for people who only use it for the squat, bench press, and deadlift.

Cons of the Rep Excalibur Stainless steel

The cons of the Excalibur stainless steel are:

No aggressive knurling
No bearing
Imported
No color options

For a barbell from a low price vendor for $300 i personally think you should not spend the money without deciding for a clear use profile of your bar. If you want an all-around barbell you can save yourself $100 to $150 by going for the sabre bar or the REP basic bar. In the $300+ range I would make a clear decision for whether you will be using the barbell mainly for powerlifting or oly lifting and then get either an aggressive knurl bar or one that goes all out on bearing and whip. Why compromise at the upper end of the price spectrum of a vendor?

One big con for patriots will be that this barbell is not being sourced and produced in the United States. If you have problems with that and want to keep the money and the jobs as local as possible then Sorinex and Rogue fitness are better options to do so. These brands also have overseas products in their portfolio but take pains to keep as much of their production and supply chain local to the United States.

Another thing that REP fitness has not figured out yet are color options. While Rogue fitness and TITAN fitness have applied Cerakote coatings to their Ohio bar and Blues city barbell lineup, REP fitness is lagging behind and only offers the Sabre bar in color for now. I am sure they will catch up, but if you want the most flexibility in terms of the material of the sleeves and which colors to go with then Rogue fitness is the better option. What REP fitness lacks in the color department for barbells they make up for in the rack department as here you have more options to choose and customize the color of each single upright.

Alternatives to the Rep Excalibur Stainless steel

If you like the middle of the road approach in the design of the Excalibur bar I would also make the price middle of the road and opt for the Excalibur bar as a non-stainless steel option. If you are outfitting a Crossfit gym in bulk, this is probably a good barbell to choose from as the design is reliable and works in many directions. For a home gym I would possibly not recommend it as ou can treat yourself for the only purchase you are possibly going to make for the next couple of years in the barbell department.

REP Gladiator MX barbell comes in at a similar price to the Excalibur stainless steel but makes a decision to be a better all-around barbell by providing bearing instead of bushing sleeves. If you will be mainly lifting overhead in your home gym or you are trying to build an oly lifting section in your commercial gym, then this is the better option than the Excalibur stainless steel.

The Rogue Chan bar is in my opinion the best hybrid bar between powerlifting and weightlifting that Rogue has to offer. It beaks this up with high tensile strength and an interesting design to keep you motivated. The only downside is that it is rarely in stock and hard to grab. That is why I have a Rogue Ohio power bar at home instead.

The TITAN Atlas bar is the bread and butter barbell model from TITAN without any color options. If you are looking to optimize for the budget this is it. As it is a fairly simple bar you are less exposed to the risk of the looser quality controls which TITAN applies to their products to offer them at the lowest possible cost to you.

Conclusion for the Rep Excalibur Stainless steel

The Excalibur stainless steel bar is a good idea, but too Vanilla for my personal tastes for a bar in this price range. Get something specific to your needs when you shell out more than $300 on a barbell or try to drive down cost as much as possible for an all-around compromise in my opinion. Spending a lot of money on a compromise is usually not a good road to take for being happy with your equipment.

Overview and review of the REP fitness Gladiator WL barbell

This is an overview of the REP fitness Gladiator WL barbell including the pros, cons, and alternatives. This article was originally posted in which barbell to buy from REP Fitness. Follow the links for more information.

Rep Gladiator WL $289

The REP Gladiator WL is a variation on the Gladiator design from REP fitness that provides a center knurl, good tensile strength, and bearing on the sleeves for under $300. If you are looking for a solid weightlifting barbell that does not break the bank, you have probably found your perfect match. The full specifications of this barbell run as following:

28mm diameter (25mm for 15kg bar)
20 kg (45lb) or 15kg (35lb) option
1500 lb static rating
3 Needle bearings and 2 bushings per sleeve
Ribbed sleeves to keep weights from sliding while training.
Hard Chrome coating - rust-resistant coating
Center Knurl on WL and SS barbell
No Center Knurl on MX Gladiator and 15kg
Medium Depth Knurl
230k tensile, 210k yield
5 year warranty

A great barbell maximizes the important ingredients that make a good weightlifting barbell like the tensile strength and center knurl while compromising on some components like the sleeves to keep the cost as low as possible. I love the thought process that went into this to make a good weightlifting barbell affordable for the average Joe.

Pros of the Rep Gladiator WL

The pros of the Gladiator WL:

Price
Design

If you want a weightlifting barbell, but do not want to spend $700 to $1000 just on one piece of equipment for your home gym, then this is a great choice. I love what REP fitness has done her to put the best of the weightlifting world into a piece of steel, without making it too expensive. Yes, you will compromise with this barbell, but you can not have it all when you buy new and want to save money at the same time.

Cons of the Rep Gladiator WL

The cons of the REP Gladiator WL barbell are:

Not IWF approved
No full bearing on the sleeves
Imported
Color options

Currently, this barbell is not IWF approved. If you want to train as close to competition standards as possible you either need to opt for the Rogue weightlifting barbell series or the Eleiko barbells. Most Olympic lifting events on the international stage still use Eleiko equipment, while Rogue fitness is catching up in market share in the United States and international Invitation events. It will be interesting to see whether we will see Rogue equipment on one of the next Olympic events for lifting.

This bar will not spin as smoothly as the fully breed Olympic barbells from Rogue, Eleiko, or REP fitness as the sleeves are a bushing and bearing hybrid. This is a choice for this barbell to keep costs down as bearing is a specialized material that comes at a higher cost.

This barbell is imported and therefore manufactured and packaged in China. If this rubs your patriotic streak up the wring way you will have to opt for Sorinex or Rogue fitness who through lengths to keep their production and supply chain as local to the United States as possible.

There are no color options on this barbell as REP fitness does not provide a wide range of sleeves or Cerakote coating for their barbells. This might change in the future when sales volumes go up and REP fitness gets the chance to invest in the production lines of their overseas vendors.

Alternatives to the Rep Gladiator WL

Alternatives to the REP Gladiator WL bar are:

The REP Gladiator MX barbell is very similar to the Gladiator WL. The main differences are the full bearing sleeves and no center knurl which makes it more of an all-round barbell than the WL. Weigh up between these two barbells what you will actually use it most for and make a decision on what to get.

The REP Excalibur is the better choice if you want a Lifetime warranty instead of a 5-year warranty on your barbell. In return, you make some considerable sacrifices on the features of the barbell which I personally would not be willing to make. But I have never filed a warranty case in my entire life, so I am probably not the best person to advise on this perk.

The Rogue Pyrros bar is the top-of-the-line weightlifting barbell from Rogue. If you want a barbell that is IWF approved and connects you to one of the greatest talents in Olympic weightlifting to date then this is the right piece of metal for you. The only downside is that the price is considerably higher than anything you would find in the REP fitness range.

The TITAN Blues city weightlifting barbell is TITAN's approach to weightlifting barbells with bearing sleeves. If you want to bring the low-cost idea to its final conclusion TITAN is a safe bet. What you get in money saved you might regret shipping and quality control wise by purchasing through TITAN as they have to cut some corners to make the low prices across their entire portfolio feasible.

Conclusion for the Rep Gladiator WL

The REP Gladiator WL barbell is a solid choice for someone who wants to save some money on ha high-quality weightlifting barbell. Thi bar makes some compromises in the design to bring the cost down, but these make sense. Especially if you see oly lifts as a more dynamic alternative to powerlifting for training at home, rather than chasing Olympic medals, then this is the perfect fit of a barbell for you.