REP fitness OMNI rack vs PR-1000 rack

This is a comparison between the REP fitness OMNI rack and the REP fitness PR-1000 rack. Follow the links for more details.

Overview and review of the REP fitness PR-1000 rack

This is an overview of the REP fitness PR-1000 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP PR-1000 Rack $289

The REP PR-1000 is a clever rack design for a relatively small price. It comes with two pull-up bars and what I like most about it, two plate storage posts at the back to weigh it down. This rack is a great choice if you want everything in a box without forgetting everything. If you have a teenager at home who wants to lift and you are not sure what to get, this is a great option. Some of the specifications are:

83"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
26" depth inside to inside, 44" wide inside to inside
2x2" steel
Plastic lined j-cups to protect bar knurl
2" hole spacing throughout the working area
1.25" and 2" Pull up bars
Numbered uprights every 5th hole
Extra bar holders on the front of safeties, great for pressing outside the rack
2 Weight horns on rear base for storage and added stability
700lb weight capacity
400lb pull up bar capacity
400lb dip attachment capacity (dip attachment is an optional upgrade)

Solid all in one rack out of the box at a very decent price.

Pros of the REP PR-1000 Rack

The pros of the REP PR-1000 rack are:

All in one design
Integrated weight storage posts
Flat foot design
Numbered uprights

For $300 you can not complain about what you are getting with the REP PR-1000. Out of the box you are covered with safeties, plate storage, a flat foot design, and numbered posts. For a rack in this price range, this is almost impossible to beat. Sometimes safeties cost up to $100 by themselves. Then we have not even started on storage options. The PR-1000 is a great rack for the beginner and occasional lifter.

Cons of the REP PR-1000 Rack

Cons of the REP-PR-1000 are:

Not ideal for the west side method
700lb max
Not a lot of attachments

This rack does not weigh a lot and the steel frame is thinner and smaller compared to the PR-5000 and PR-4000. This makes it not an ideal rack for heavy users who put their rack through a lot of abuse. If you regularly train with more than 400lbs on the bar, use band, and chains, and do kipping pull-ups like there is no tomorrow then this is not the rack for you. If you also see your rack as an I vestment for the future and would like to make it grow you are possibly better off with a PR-4000.

Alternatives to the REP PR-1000 Rack

The PR-1050 is a short version of the PR-1000 to fit I to spaces with lower ceilings. If you want to fit a rack into an attic or basement the 1050 might be a better option than the PR-1000. The REP PR-1100 gives you a multi-grip pull-up bar instead of plate storage and a choice of color.

The Rogue HR2 half rack is the most popular Rogue rack on marathon-Crossfit.com with the most viewers out of the Rogue portfolio. This rack is Rogue’s sweet spot for value for money as it combines a half rack design with their monster lite series. The biggest bonus with this rack is the plate storage you get at the back of the rack. Whether this justifies a starting price of $600 compared to $300 of the PR-1000 I leave for you to decide.

The TITAN T2 rack is the lower price rack range of TITAN fitness who are themselves a price leader in the home gym market. If you want to get as much metal with holes as cheap as possible without worrying about getting ripped off on eBay, Amazon, or Craigslist than TITAN is the place to go.

Conclusion for the REP PR-1000 Rack

The REP fitness PR-1000 is a series contender if you are considering a home gym but don’t know yet whether you are fully committing. It will be relatively easy on your purse and you won’t make a mistake in the configuration and forget an annoying detail. I wish I had known about this rack when I got my first rack when I was a teenager. My mother shelled out 400 bucks on what was basically a bench with uprights. This would have been a lot better.

Overview and review of the REP fitness OMNI rack

This is an overview of the REP fitness OMNI rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP OMNI Rack $934

The Rep OMNI rack is a flat foot version of the REP PR-5000 series which has gained quite some popularity recently. It is a solid rack from a vendor who imports their parts rather than making them in the US as Sorinex and Rogue Fitness would. The main difference to the PR-5000 is the flat foot base and the numbering on the uprights. The full specifications of this rack are:

3x3 11-Gauge Steel with 1” diameter holes on upright.
Compatible with most 5000 Series attachments including the Lat/Low Row.
Up to 15 potential configurations when paired with the Omni Plus.
J-cup, color options, and attachments are fully customizable.
A long, flat-footed base helps promote stability, no need to bolt the rack down.
Large stainless steel logo plate for additional rigidity and lateral stability.
Includes: Multi-grip pull-up bar, six-band pegs, and hardware to connect up to six uprights to the base.
Enough hardware will be provided for all possible configurations, which means that extra hardware may be left over after the build.
Lat attachment adds 23" depth to the 4-post half-rack or adds 5" depth to the 6-post power rack is mounted to the interior uprights.

This is a good option when you do not want to bolt down your rack and start with a half rack that you will later upgrade. If you are looking for the most space-efficient option in the market it is probably not the best rack you can get.

Pros of the REP OMNI Rack

The Pros of the OMNI rack are:

Flat foot design
Slightly lower price than their main competitors
Upgrade options

The main point about this rack is the flat foot design which means that you do not need to bolt it to the ground to make it stable. The bottom has quite some weight to it and a bigger footprint than a regular 4 post-half-rack would have. This is great to keep it from tipping over when you only have four posts and want to work with banded resistance on the deadlift, bench press, and squat.

As REP imports their material they can get away with lower costs for racks that compare in quality to the market leader Rogue Fitness. This means you get a similar quality rack for a lower price. This is one of the most appealing aspects of the REP fitness as they generally seem to do a better job on quality control than TITAN fitness but use overseas to keep costs down.

This is probably the best rack from REP fitness you can get, if you do not want to bolt down your rack but have big plans for it in the future. You will basically get a PR-5000 with a flat foot design and can add to the base to your heart's contempt with further uprights.

Cons of the REP OMNI Rack

The cons of the OMNI rack are:

Space requirements
Numbering on uprights
Website ordering system

The flat foot base of the OMNI rack is laid out to accommodate a six-post design. While this makes it one of the few flat foot designs in the market for a six-post rack, it eats up too much space in a home gym with limited space. If you want to optimize for space a folding rack or a regular half-rack are the better options.

The numbering on the uprights does not go through every hole. While this saves cost in production it is a little inconsequential for ease of use. Either have no numbers to maximize my savings or number all holes to maximize the ease of use. This is especially true if you are buying in a commercial setting rather than a home gym.

Ordering an OMNI rack is a little tricky and I wouldn't recommend it for first-time rack buyers. With these modular systems, it is better to really have an idea of the dimensions and accessories you are buying before configuring it. Compared to their main competitor rogue the configuration system on the website is also not as easy to use. But that is just my personal taste.

Alternatives to the REP OMNI Rack

Alternatives to the REP Omni rack are:

This selection of racks is based in 3x3 11 Gauge steel uprights to avoid presenting too many options to you. If you want to save more money you can also look into 2x3 Gauge uprights. The smaller you are and the lighter the weights you move, the more likely it is that you should try to save some money for your home gym by going with a smaller frame. Commercial buyers should go as big as they possibly can on their budget based on insurance questions and that you can not predict as well who will use your equipment.

If you stick with the idea of "I want a Rogue quality rack at the lowest possible price" then the REP-PR 5000 and the REP PR-4100 are two other options to consider. The REP PR-5000 has been hailed as one of the best, if not the best, rack for home gym users based on its good value for money. You can configure it as a 4 post or 6 post rack. The main difference to the OMNI rack is that it does not come with a flat foot design. The REP PR-4100 would be the folding rack option from REP Fitness. This is a good way to go if you still want to park your car in your garage when you are not training.

If you are toying with the idea of a flat foot 6 post rack the OMNI rack is one of the few, if not the only option out there. Another option would be the RM6 rack from Rogue which needs to be bolted to the ground. Go with the RM6 if you are planning to get a belt squat, as currently, the Rhino Drop-in is the superior option to the belt squats from REP Fitness. The Rogue RM3 is the half rack option from Rogue with 3x3 Gauge steel. If you have the budget for an Omni rack you can probably also afford the RM3. With the RM3 you are saving footprint compared to the OMNI rack, as it comes with four uprights without a flat foot design. The uprights will also have all the holes numbered instead of just a few on the OMNI rack. With this rack, you will be buying from the current market leader in home gym equipment in terms of quality and units sold. Rogue also goes to lengths to make sure that their product is as American as possible by sourcing metal and staff locally and keeping production lines in Ohio. This comes at a higher price than their competitors to the consumer. The Rogue RM3W is the folding variation of the RM3. If you want the best and can afford it and you are not that much into the flat foot idea, this can be a good route to explore.

The TITAN series rack is the flagship of the TITAN rack lineup. This is TITAN's go at being like Rogue Fitness. You will also get a 3x3 11 Gauge steel uprights setting, but this is a full rack, rather than a half rack. If you were toying with the idea of a full rack that does not need to be bolted to the ground, then this might be the right option for you. If you want a 3x3 folding rack then the X-3 from TITAN would be the right choice. TITAN is known to undercut most of the other vendors on the market considerably when you compare like for like. This is why I am presenting you with their top-line rack as an alternative to the OMNI rack. The downside of TITAN is that the same to have the most incidents with quality issues between Rogue, REP Fitness, and TITAN fitness. This makes sense as you need to cut some corners to undercut everyone else in the market. If you don't mind a potential risk of minor blemishes, some inconsistency in paint, or on the drilling of the holes, then TITAN is right for you. A good option for the DIY enthusiast who wants to save money for a new drill to fix their rack setup and then have it for other home projects.

Conclusion for the REP OMNI Rack

The REP OMNI rack is in my opinion the REP fitness approach to tailoring their portfolio to universities. This is the right rack for the strength coach that does not want to explain to the dean why he has to drill holes into the resurfaced gym floor that was paid out of taxpayer's money. The same goes for someone who is renting a mansion and wants to put a six-post rack into it without damaging the 100-year-old original floor. For anyone who can drill into the floor or just uses a rack without bolting it to the ground, I think it is not the ideal option. Why create an unnecessary unused footprint in your limited home gym space for a half-rack?