REP fitness PR-1000 rack vs TITAN T3 Yoke

This is a comparison between the Rep Fitness PR-1000 rack and the TITAN T3 Yoke. Follow the links for more details.

Overview and review of the TITAN T3 Yoke

The TITAN T3 Yoke with pulley will put you back about $350 - $370. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500”

Overview of the T3 Yoke

Yokes are great alternatives to power racks as they are portable, come with the plate storage and can be used for home carries. If you want to add a versatile tool to your gym you should definitely consider a yoke. Here are the specs and features of the TITAN version:

Yoke details

Use as a Squat / Press Stand, Push or Drag Sled, or Yoke.
A staple for Strongman training.
Adjustable crossbar to custom fit your height
Integrated vertical plate storage.
2" hole spacing on uprights
1" Westside spacing through the bench zone
92" design makes for an ideal pull up bar height.
2.95" Crossbar diameter.:
Weight: 178 LB
Height: 92"
Inside width: 45"
Footprint: 51" x 52"
Uprights: 2"x3" 11 gauge steel
Weight capacity: 750 LB

Pros of the Yoke

Multifunctional Gym Equipment which is a great addition if you have to space to do carries. Kills many birds with one stone at a very good price.

Cons of the Yoke

This item has a lot of welding to be done. These might be of poor quality with TITAN is this is where they often cut corners to justify the low prices. This will be mostly cosmetic, not functional.

Alternatives to the Yoke

T3 fold back rack
X2 and incline combo

The T3 uses a folding concept but with 2x3 steel tubes to be stored against the wall when you don’t use it.

The X2 is one of the cheapest series in the TITAN line up. With its 2x2 steel tubes, it uses the least material to build a rack. If you want to downsize on all ends to fit a bench and rack into $500 budget comfortably, this is for you.

Summary for the Yoke

A Yoke is always a good, cost-efficient option for many use cases. TITAN's price on it makes it extra sweet.

Overview and review of the REP fitness PR-1000 rack

This is an overview of the REP fitness PR-1000 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP PR-1000 Rack $289

The REP PR-1000 is a clever rack design for a relatively small price. It comes with two pull-up bars and what I like most about it, two plate storage posts at the back to weigh it down. This rack is a great choice if you want everything in a box without forgetting everything. If you have a teenager at home who wants to lift and you are not sure what to get, this is a great option. Some of the specifications are:

83"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
26" depth inside to inside, 44" wide inside to inside
2x2" steel
Plastic lined j-cups to protect bar knurl
2" hole spacing throughout the working area
1.25" and 2" Pull up bars
Numbered uprights every 5th hole
Extra bar holders on the front of safeties, great for pressing outside the rack
2 Weight horns on rear base for storage and added stability
700lb weight capacity
400lb pull up bar capacity
400lb dip attachment capacity (dip attachment is an optional upgrade)

Solid all in one rack out of the box at a very decent price.

Pros of the REP PR-1000 Rack

The pros of the REP PR-1000 rack are:

All in one design
Integrated weight storage posts
Flat foot design
Numbered uprights

For $300 you can not complain about what you are getting with the REP PR-1000. Out of the box you are covered with safeties, plate storage, a flat foot design, and numbered posts. For a rack in this price range, this is almost impossible to beat. Sometimes safeties cost up to $100 by themselves. Then we have not even started on storage options. The PR-1000 is a great rack for the beginner and occasional lifter.

Cons of the REP PR-1000 Rack

Cons of the REP-PR-1000 are:

Not ideal for the west side method
700lb max
Not a lot of attachments

This rack does not weigh a lot and the steel frame is thinner and smaller compared to the PR-5000 and PR-4000. This makes it not an ideal rack for heavy users who put their rack through a lot of abuse. If you regularly train with more than 400lbs on the bar, use band, and chains, and do kipping pull-ups like there is no tomorrow then this is not the rack for you. If you also see your rack as an I vestment for the future and would like to make it grow you are possibly better off with a PR-4000.

Alternatives to the REP PR-1000 Rack

The PR-1050 is a short version of the PR-1000 to fit I to spaces with lower ceilings. If you want to fit a rack into an attic or basement the 1050 might be a better option than the PR-1000. The REP PR-1100 gives you a multi-grip pull-up bar instead of plate storage and a choice of color.

The Rogue HR2 half rack is the most popular Rogue rack on marathon-Crossfit.com with the most viewers out of the Rogue portfolio. This rack is Rogue’s sweet spot for value for money as it combines a half rack design with their monster lite series. The biggest bonus with this rack is the plate storage you get at the back of the rack. Whether this justifies a starting price of $600 compared to $300 of the PR-1000 I leave for you to decide.

The TITAN T2 rack is the lower price rack range of TITAN fitness who are themselves a price leader in the home gym market. If you want to get as much metal with holes as cheap as possible without worrying about getting ripped off on eBay, Amazon, or Craigslist than TITAN is the place to go.

Conclusion for the REP PR-1000 Rack

The REP fitness PR-1000 is a series contender if you are considering a home gym but don’t know yet whether you are fully committing. It will be relatively easy on your purse and you won’t make a mistake in the configuration and forget an annoying detail. I wish I had known about this rack when I got my first rack when I was a teenager. My mother shelled out 400 bucks on what was basically a bench with uprights. This would have been a lot better.