REP fitness PR-1050 rack vs TITAN T3 tall rack

This is a comparison between the Rep Fitness PR-1050 rack and the TITAN T3 tall rack. Follow the links for more details.

T3 tall power rack 36 black

The tall TITAN T3 in black will put you back about $450 - $520. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500”

Overview of the T3 black power rack

This is the biggest version of the T3 rack you can get from TITAN. It has 2x3 tubing and is 36” deep. The height comes to 91 1/8”. This is a no-nonsense addition to any gym located in the middle of the price range of TITAN. If you want to have money left for other equipment and only use the rack 2 times a week, this is a great piece to add to your home gym. In a professional gym, this can be the go-to rack for everyone except your biggest athletes, unless you coach an NFL team. The features and specifics of the T3 tall rack are:

2 uprights featuring 6" side hole spacing
2"x 3" steel tubes.
1,100 LB rackable capacity
4,400 LB total rack capacity
1.25" and 2" diameter pull up bars
Includes J-Hooks and weight holders.
Weight: 281 LB
Height: 91 1/8"
Height of Pull Up Bar: 89"
Inside Width: 42 1/8"
Outside Width: 53 1/4"
Inside Depth: 36"
Outside Depth: 44 3/4"
Floor Space: 16.7 square feet
Material: Steel

This is an affordable rack for big boys.

Pros of the T3 tall rack

As with most TITAN equipment the prices are very attractive for something fresh of the shelf. With the depth and height of this rack, even the tallest athletes can still work freely in the rack.

Cons of the T3 tall rack

It will not fit in every space. If you have limitations consider the X3 Half rack or squat stand. Also, the finish might be not as perfect as with other vendors as there have been repeated reports of TITAN equipment showing inconsistencies on this end.

Alternatives to the T3 tall rack

Alternatives to the T3 tall rack are

If you need a tall rack because of your size, but do not have the space to fit a 36” depth rack into your gym, garage or basement you can also opt for the 24” depth version. This way you can save some space.

If you want to save space and have 3x3 steel tubing you can also go for the X3 Half rack. If you use it like a squat stand rather than a full rack, you can use the second set of uprights to store plates on.

If you don’t need plate storage and want the freedom of a squat stand you can opt for the X3 squat stand instead. Just be aware that it would be good to have space to drop the bar as spotter arms can not always be relied on.

Summary of the T3 tall rack

A good option to save money while still training as a big guy.

Overview and review of the REP fitness PR-1050 rack

This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP PR-1050 Rack $269

The REP PR-1050 is a short version of the REP PR-1000. I am a big fan of the design of the REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage, and safeties including a rack for under $300. The same goes for the PR-1050. Some of the specifications of the PR-1050 are:

72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
26" depth inside to inside, 44" wide inside to inside
2x2" steel
Plastic lined j-cups to protect bar knurl
2" hole spacing throughout working area
1.25" and 2" Pull up bars
Numbered uprights every 5th hole
Extra bar holders on the front of safeties, great for pressing outside the rack
2 Weight horns on rear base for storage and added stability
700lb weight capacity
400lb pull up bar capacity
400lb dip attachment capacity (dip attachment available as an optional upgrade)

This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.

Pros of the REP PR-1050 Rack

The pros of the REP PR-1050 are:

All in one design
Price
Short design

If you are looking for something simple and somewhat solid look no further. The PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.

Cons of the REP PR-1050 Rack

The cons of the REP PR-1050 are:

700lbs capacity limit
Limited upgrade options
Not ideal for the west side method
Imported

This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the Omni rack or PR-5000.

Alternatives to the REP PR-1050 Rack

The alternatives to the REP PR-1050 rack are:

The REP PR 1000 is a taller version of the PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.

The Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.

The TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.

Conclusion for the REP PR-1050 Rack

If you think that the PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the PR-1000 instead.