REP fitness PR-1050 rack vs TITAN X3 half rack

This is a comparison between the Rep Fitness PR-1050 rack and the TITAN X3 half rack. Follow the links for more details.

Overview and review of the X3 half rack

The TITAN X3 half rack will put you back about $550. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500”

Overview of the X3 half rack

The X3 half-rack gives you the safety of a power rack while optimizing for floor space. You can even store your plates on it if you want to. The 3x3 steel tubes of this rack also provide Westside hole spacing which allows for smaller increments on your bench press setup. If this is the rack for you it comes with the following features and specs:

3" x 3" 11 gauge steel uprights.
Westside hole pattern through bench zone.
2" hole spacing above and below.
1,000 + lbs. capacity.
Pair of UHMW lined X-3 J-Hooks included.
Double-sided gusset plates.
Overall height: 92"
Overall width: 49"
Overall depth: 48"
Product Weight: 250 LB
Finish: Black Powder Coating
Floor Space: 16.3 sq ft (49" x 48")
Rack depth: 17"
Front upright height: 92"
Rear upright height: 72"

This is a great option for college dorms or small spaces at home. It can also be used to have high quality in a gym while saving a little in overall floor space for a line of racks.

Pros of the X3 half rack

As with most of the TITAN line up first and furthermost the price for what you are getting. Apart from that, a half rack can be a great space saver whilst still functioning as a full rack. Especially the possibility to store your plates on the second set off uprights might make it superior to a squat stand.

Cons of the X3 half rack

Squatting inside the rack might leave you constrained. Especially if you are very tall and big. Small athletes will have no problems, but if you are the next Eddie Hall or generally like a bit of space to do your exercises, go for a full rack like the T3 instead.

Alternatives to the X3

These are other options for the X3 half-rack:

If you already have a bench or just don’t need one you can invest just a little extra and get a colored rack.

Another way to go is to save on the color to have more budget for different size options on the T3 and maybe even adding some plate holders. The T3 is available in a short and tall version to adjust the height. For depth, you can choose between 24” and 36”.

If you want to stay within budget but start your gym with 3x3 tubing you can go for the X3 squat stand. This is a good option for big and/or experienced lifters who prefer the freedom and flexibility of a squat stand, yet still, move big weights. I recommend that you have enough space and experience on how to drop weights from a squat position if you opt for a squat stand. Spotter arms are nice with a stand but usually useless. You either miss them on a hardcore drop or the entire unit comes down because you didn’t bolt it to the ground.

The T3 folding rack saves you about $200 on the T3 and can be installed in your garage. If you only train on the weekends or two days a week, this is a good option so that you can still use the garage or basement for your car/ miscellaneous rubbish you think is important ( I have that stuff in my attic). The savings can be put towards a barbell like the blues city or Atlas bar.

Summary for the X3 Half rack

If you are ok with squatting outside the rack and still want 3x3 uprights and are storage this is a great option for you. If you have Eddie Hall’s size, stay away from this as you will constantly bang off the uprights of you are squatting inside your rack. This injury risk is not worth the savings compared to a T3.

Overview and review of the REP fitness PR-1050 rack

This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.

Overview of the REP PR-1050 Rack $269

The REP PR-1050 is a short version of the REP PR-1000. I am a big fan of the design of the REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage, and safeties including a rack for under $300. The same goes for the PR-1050. Some of the specifications of the PR-1050 are:

72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
26" depth inside to inside, 44" wide inside to inside
2x2" steel
Plastic lined j-cups to protect bar knurl
2" hole spacing throughout working area
1.25" and 2" Pull up bars
Numbered uprights every 5th hole
Extra bar holders on the front of safeties, great for pressing outside the rack
2 Weight horns on rear base for storage and added stability
700lb weight capacity
400lb pull up bar capacity
400lb dip attachment capacity (dip attachment available as an optional upgrade)

This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.

Pros of the REP PR-1050 Rack

The pros of the REP PR-1050 are:

All in one design
Price
Short design

If you are looking for something simple and somewhat solid look no further. The PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.

Cons of the REP PR-1050 Rack

The cons of the REP PR-1050 are:

700lbs capacity limit
Limited upgrade options
Not ideal for the west side method
Imported

This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the Omni rack or PR-5000.

Alternatives to the REP PR-1050 Rack

The alternatives to the REP PR-1050 rack are:

The REP PR 1000 is a taller version of the PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.

The Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.

The TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.

Conclusion for the REP PR-1050 Rack

If you think that the PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the PR-1000 instead.