TITAN lat tower vs TITAN Glute and hamstring developer

This is a comparison between the TITAN lat tower and the TITAN Glute and hamstring developer including pros, cons, and alternatives. Follow the links for more details.

Overview and review of the TITAN Glute and Hamstring developer $414

This is an overview of the TITAN Glute and hamstring developer including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview of the TITAN Glute and hamstring developer

The TITAN Glute and hamstring developer is a clone of the similar product from Rogue, but for about half the price. A glute and hamstring developer helps with attacking the lower back and hamstring in a way that is only hard to do with usual machines and free weights. On this the TITAN GHD delivers with minor subtractions for product quality. The full specifications of the TITAN GHD are:

- Wide adjustment range

- Extra large pads for comfort

- Heavy-Duty steel construction

- Wide base to eliminate tipping

- Includes wheels for mobility or storage

- Height: 41-in.

- Width: 45.5-in.

- Length: 70-in.

- Weight Capacity: 350 lb.

- Product Weight: 190 lb.

- Packaging: 2 boxes

This is a good addition for a home gym with extra space or a commercial gym for athletes and strength focused clients. Be preapred that this machine will need some instructions to be used properly, if you put it in a public space as it is not as straightforward to use as other machines you will find in commercial gym.

Pros of the TITAN Glute and hamstring developer

The pros of the TITAN GHD are:

Price
Build

This machine does what it says on the tin for half the price. It is build like a tank and if you are the only one using it you also do not have to worry about the minor design flaws this machine has compared to the Rogue GHD. If you want to save money for your home gym and at the same time train the heck out of your posterior chain than this is the weapon of choice.

Cons of the TITAN Glute and hamstring developer

The cons of the TITAN Glute and hamstring developer are:

Space requirements
Adjusting the machine
Reverse hyper not included

One big point against the TITAN GHD is the space requirement. In addition to the big footprint you also have to factor in that you will be hanging out of the construction to do the exercise. This makes it an unusable solution in many small spaces which barely fit a rack.

TITAN did not fully think through how to adjust this machine for multiple users. In a home gym scenario this is irrelevant and you can just take the savings made compared to the Rogue GHD. If you run a commercial gym and expect the machine to be adjusted often for several users, than you might want to go for their machine as the mechanics work easier.

TITAN also has machines in their portofolio which are a GHD and reverse hyper in one. If you want to save money and space I would encourage you to look into these options before making your final purchase decision. Especially if you have limited space.

Alternatives to the TITAN Glute and hamstring developer

Alternatives to the Glute and Hamstring developer are:

The TITAN H-PND was the first go from TITAN at a reverse hyper. This machine is heavily overbuilt and therefore great for very big individuals who have the space for a dedicated Reverse hyper machine. If you have multiple athletes that want to move tons of weights on a reverse hyper this is the one for you.

The TITAN Economy H-PND is a budget optimized version of the Original reverse Hyper from TITAN. To put a lower price tag on it it has been shrunk on most aspects. It has a smaller pad and the steel it is built of is thinner. It is still a massive machine that can be used by most average joes. If your gym is swarmed by individuals the size of MIke O Hearn, Stan Efferding, and Brian Shaw, you might want to go for the H-PND instead.

The TITAN Glute and Hamstring combo is a GHD and reverse hyper combo based on the design of the Economy H-PND. This is a great machine for a spacious home gym that wants to have a reverse hyper and a GHD.

Conclusion for the TITAN Glute and Hamstring developer

If you have a commercial gym that fits a reverse hyper and a GHD, the Titan Glute and hamstring developer is a great option. in a home gym i would definitely also look at the Glute and hamstring combo if I have already identified the need for a GHD to kill two birds with one stone. The space you save could be used against a belt squat machine.

Overview and review of the TITAN Lat tower $1299

This is an overview of the TITAN lat tower including pros, cons and alternatives. This article with originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview of the TITAN lat tower

The TITAN lat tower is a low budget clone of the Rogue lat pull. You can increase the weight from 10lbs to 300lbs in increments. With this machine you can train vertical and horizontal pulls to build a bigger back. It includes a seat which is great if you want to go very heavy. If you just get a pulley tower without an attached seat you need an extra bench. This makes the setup awkward, especially when you go heavy. This is a good machine for dedicated powerlifters and bodybuilders who really want to blow up your back. Any commercial gym worth their salt should have at least one of these. A home gym might consider more versatile pulleys to make better use of space. The full specifications of the TITAN lat tower are:

- Selector style weights from 10 - 300 LB.

- 6 Thigh pad and 8 footplate positions.

- Band pegs for adding resistance bands.

- High quality steel construction and powder coated for a smooth durable finish.

- Lat bar and low pull handle included.

- Floor Dimensions: 41" Wide x 57" Deep

- Overall Height: 87"

- Footplate Dimensions: 17" x 9"

- Lat Bar Width: 42"

- Lat Bar Diameter: 1"

- Low Pull Handle Width: 14"

- Low Pull Handle Diameter: 1"

- Weight: 530 LB

This is a great lat pull machine for this price. Compared to anything you will get on Amazon this thing is sturdy and can take a beast hanging from it going nuts. Compared to direct competitors for a similar machine you save $800. If you are in the market for one of these there is very little not to like about the TITAN lat tower.

Pros of the TITAN Lat tower

Pros of the TITAN lat tower are:

Price
Design
Lat bar included

As with anything from TITAN you save considerable money compared to similar products from the competition. The Rogue Lat pull down retails for $2000 and is basically the same machine with some minor differences. If you want to build a great home gym on a budget $800 can go a long way and should not be sneered at.

Even though the design is more or less copied it doesn't make it bad. With this lat tower you get a rowing machine and a lat pull machine in one. Especially for people who already own a rack and want to go heavy on developing their back, this is a great machine which covers all of these needs in a compact way.

On top of this the lat bar is included which can cost up to $200 if you source it separately and get a high quality bar.

Cons of the TITAN Lat tower

The cons of the TITAN lat tower:

Finish
Space requirements
Price

As with many TITAN fitness products, TITAN cuts some corners to offer these at half the price of the competition. This is usually reflected in the quality of their staff, manuals and consistency of the finish of their products. As most fitness equipment is not high precision formula 1 gear this is not the end of the world but can get annoying if you are not good at DIY. Compared to Rogue the weights often do not work as smooth, some of the seating positions do not click as well. Its like the difference between an Audi RS4 and a Subaru Impreza. You will get both cars to go fast around corners. The Audi will just be more comfortable and easier to handle for the non professional.

Compared to a functional trainer or rack, the TITAN lat tower takes up approximately the same amount of floor space, while giving you less versatility. If you are mainly concerned with space constraints, a lat tower is not a great choice. It is a better choice then many other machines but is inferior to a functional trainer or rack depending on your preferences in training style.

At a price point of $1299 the TITAN lat tower is still a considerable investment for a machine that is mainly geared toward accessory exercises. For less money you can get a concept 2 rower or Spin bike and make your gym more functional overall.

Alternatives to the TITAN lat tower

The plate loadable lat tower is another option from TITAN which saves you $800 if you already own plates compared to the Lat tower. If you have a home gym and already own a rack with weights and do not mind some DIY and a little more setup, the plate loadable lat tower is a great alternative to the TITAN lat tower. It will be more prone to break and have a more makeshift feel about it overall, but it keeps another $800 in your pocket to take your partner out or invest in more equipment.

The TITAN plate loadable crossover machine costs less and leaves you with more options to use two pulleys with plates. If you have the space in your gym and you do not want to go heavy on vertical pulls this is an option. I am personally not a fan of cable crossovers unless for chops for your core, but if you are not a free weight fanatic like me, this might be for you.

The wall mounted pulley tower is the ultimate budget option for vertical pulls from TITAN this comes in at under $200 to train your back and lats. It will need more DIY skills as it needs to be drilled into a sturdy wall. Avoid plaster walls with this one. It will do the job, but the cables are very exposed and easily tangled. Good for beginners, but if you already are 300lbs of fine muscle, do not get a machine that barely weighs more than your daughter and maybe even less than your partner (75lb).

The TITAN functional trainer is probably the better option if you are worried about space and do not want to go super heavy on your pulls. This machine is a fully functioning gym itself, even though some of the setups, especially for squats, can be awkward. It takes up the same amount of space as the Lat tower. If you go for the plate loadable version it even costs less than the lat tower, assuming you already have plates. Otherwise you would have to factor their purchase into the overall costs.

Conclusion for the TITAN Lat tower

The TITAN lat tower is a great option for the home gym of the dedicated Arnold or Ed Coan in wait. It is also a great option for commercial gyms that are looking for good,sturdy equipment that will take beating at a reasonable price. Anyone who needs to optimize for space should stay away from this as a functional trainer or rack would be a better option. If budget is not of concern, the Rogue lat pull will be more refined option but only if your of the mindset to only get the best in class or $800 is only spare change to you. This is a great buy for anyone who means business, has space, and still wants to protect their wallet.