TITAN Lying prone leg curl vs TITAN Glute and Hamstring developer

This is a comparison between the TITAN lying prone leg curl and the TITAN Glute and hamstring developer including pros, cons, and alternatives. Follow the links for more details.

Overview and review of the TITAN Glute and Hamstring developer $414

This is an overview of the TITAN Glute and hamstring developer including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview of the TITAN Glute and hamstring developer

The TITAN Glute and hamstring developer is a clone of the similar product from Rogue, but for about half the price. A glute and hamstring developer helps with attacking the lower back and hamstring in a way that is only hard to do with usual machines and free weights. On this the TITAN GHD delivers with minor subtractions for product quality. The full specifications of the TITAN GHD are:

- Wide adjustment range

- Extra large pads for comfort

- Heavy-Duty steel construction

- Wide base to eliminate tipping

- Includes wheels for mobility or storage

- Height: 41-in.

- Width: 45.5-in.

- Length: 70-in.

- Weight Capacity: 350 lb.

- Product Weight: 190 lb.

- Packaging: 2 boxes

This is a good addition for a home gym with extra space or a commercial gym for athletes and strength focused clients. Be preapred that this machine will need some instructions to be used properly, if you put it in a public space as it is not as straightforward to use as other machines you will find in commercial gym.

Pros of the TITAN Glute and hamstring developer

The pros of the TITAN GHD are:

Price
Build

This machine does what it says on the tin for half the price. It is build like a tank and if you are the only one using it you also do not have to worry about the minor design flaws this machine has compared to the Rogue GHD. If you want to save money for your home gym and at the same time train the heck out of your posterior chain than this is the weapon of choice.

Cons of the TITAN Glute and hamstring developer

The cons of the TITAN Glute and hamstring developer are:

Space requirements
Adjusting the machine
Reverse hyper not included

One big point against the TITAN GHD is the space requirement. In addition to the big footprint you also have to factor in that you will be hanging out of the construction to do the exercise. This makes it an unusable solution in many small spaces which barely fit a rack.

TITAN did not fully think through how to adjust this machine for multiple users. In a home gym scenario this is irrelevant and you can just take the savings made compared to the Rogue GHD. If you run a commercial gym and expect the machine to be adjusted often for several users, than you might want to go for their machine as the mechanics work easier.

TITAN also has machines in their portofolio which are a GHD and reverse hyper in one. If you want to save money and space I would encourage you to look into these options before making your final purchase decision. Especially if you have limited space.

Alternatives to the TITAN Glute and hamstring developer

Alternatives to the Glute and Hamstring developer are:

The TITAN H-PND was the first go from TITAN at a reverse hyper. This machine is heavily overbuilt and therefore great for very big individuals who have the space for a dedicated Reverse hyper machine. If you have multiple athletes that want to move tons of weights on a reverse hyper this is the one for you.

The TITAN Economy H-PND is a budget optimized version of the Original reverse Hyper from TITAN. To put a lower price tag on it it has been shrunk on most aspects. It has a smaller pad and the steel it is built of is thinner. It is still a massive machine that can be used by most average joes. If your gym is swarmed by individuals the size of MIke O Hearn, Stan Efferding, and Brian Shaw, you might want to go for the H-PND instead.

The TITAN Glute and Hamstring combo is a GHD and reverse hyper combo based on the design of the Economy H-PND. This is a great machine for a spacious home gym that wants to have a reverse hyper and a GHD.

Conclusion for the TITAN Glute and Hamstring developer

If you have a commercial gym that fits a reverse hyper and a GHD, the Titan Glute and hamstring developer is a great option. in a home gym i would definitely also look at the Glute and hamstring combo if I have already identified the need for a GHD to kill two birds with one stone. The space you save could be used against a belt squat machine.

Overview and review of the TITAN Lying prone leg curl $499

This is an overview of the TITAN lying prone leg curl including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview of the TITAN lying prone leg curl

The TITAN lying prone leg curl is a 2 in 1 machine for leg extensions and lying prone leg curls. These exercises target and isolate the muscles in your upper leg for more growth. This is a great machine for accessory work on your legs after you finished a big set of barbell squats or leg presses. The machine is plate loaded and therefore a good option in a gym that prefers to use free weights compared to weight stacks. The plate loaded design makes it a little more suited to private gyms or home gyms . In commercial gyms it can be a little cumber some to have a plate loaded design, as too many people might using up plates if all of your machines are configured this way. Your clients won't appreciate if they haveto constantly load machines themselves and wait for plates to make it happen. The full specifications of this machine are:

- (4) Handle Grips

- (1) Weight Sleeve

- (4) Adjustable foot rollers

- (4) bolt-down holes for anchoring

- Builds size and strength in the hamstrings

- Also works the glutes and calves

- Leather padding for comfort

- Perform leg curls and leg extensions from the same seated position.

- High quality steel construction for a solid, long lasting design.

- Foot Print: 30-in. x 60-in.

- Dimensions: 34-in. H x 36-in. W x 60-in. L.

- Leg/Foot Roller Diameter: 5-in.

- Leg/Foot Roller Width: 18-in.

- Sleeve Diameter: 2-in.

- Sleeve Length: 10-in.

- Loadable Weight Capacity: 300 lb.

- Frame: 2-in. x 2-in. 11-ga steel tubing.

- Material: Leather.

- Finish: Welded. Powder Coated.

- User Weight Capacity: 300 lb.

This is a great machine to take care of accessory work in a home gym or private gym.

Pros of the TITAN lying prone leg curl

The pros of the TITAN lying prone leg curl are:

2 in 1 design
Plate loaded
Price

The 2 in 1 design makes this a great machine to be placed in a home gym. You will save space if you like leg extension and prone curl to build your legs even further. It will also save you the cost and space of getting two machines for the purposes of building bigger upper legs after covering the basics with the barbell squat or leg press.

A plate loaded solution is great whenever there is only one or a few users for the gym. This means you are not paying double or triple for weight stacks in machines that are not in use when you are not on them. If you want to be economic about building your own home gym, plate loaded machines are the way to go.

For what you are getting the price is very low. This machine comes from a vendor that ships from the US and has customer service included. Even though the shipping and service might not be the best in the business (for that you probably have to run to Rogue or Eleiko), it is still better than getting a similar machine shipped for a lower price from a random Chinese or Inidian vendor via amazon.

Cons of the TITAN lying prone leg curl

Cons of the TITAN lying prone leg curl are:

Plate loaded
Price
Build

While a plate loaded machine is great in an environment with low footfall it can turn into problem in a highly frequented commercial gym. If you buy for a busy gym, make sure that you get machines with the weights included. Plate loaded machines eat up the time of your customers and create tripping hazards. They also create more of a mess that staff needs to clean up, in case there are enough plates to go around for everyone.

At $500 the TITAN lying prone curl has a great price for what it is, the question is what else you can get for that budget. If you stretch yourself a little you can get a rack and a barbell and rack from TITAN in that budget range ($600 should do the trick). If i am building a home gym or expanding an existing gym that is definitely the better investment.

While the TITAN lying prone curl is a great machine it might be little small for massive athletes. If you have to provide a facility for very big athletes or customers which have problems with their balance due to rehab, you might ant to get something a little beefier like the Rogue Prone curl.

Alternatives to TITAN the lying prone leg curl

Alternatives to the TITAN lying prone curl are:

TITAN seated leg curl machine

The TITAN seated leg curl machine is a cheaper version of the leg curl from TITAN. It will take up less space in the gym and you will perform the same exercises as with the lying prone curl in a seated position. If you do not have the space in your gym to be stretching out fully this might be the better option for leg curls to save money and space.

Conclusion for the TITAN lying prone curl

The TITAN lying prone curl is a great machine for anyone who want to do all kings of leg curl variations in their home gym. You will have a 2 in 1 design for your machine and it will not take $1000 out of your pocket. For a commercial setting you would have to think hard about whether plate loaded is really the way you want to go. If you expect very high traffic of average fit citizens in your gym, a prone leg curl with an integrated weight stack might be the better idea.