Run Faster, Lift stronger, Think deeper

REP fitness AB-5000 bench vs Reflex competition bench

Written by Pascal Landshoeft | Jun 3, 2021 4:00:00 PM

 REP fitness AB-5000 bench vs Reflex competition bench

This is a comparison between the Rep Fitness AB-5000 bench and the Reflex competition bench. Follow the links for more details.

Overview and review of the Reflex competition bench

The Reflex competition bench comes in at $1697 and is a great addition to your existing gym to widen the possible exercises you can do. This article was originally published in "Which bench to get to from Rogue".

What else to consider from Rogue

Overview of the Reflex Competition bench

 
The reflex competition bench setup delivers a sturdy machine for bench pressing competitions. This is the kind of bench where all sizes of athletes can perform to their very best. A competition bench is needed so that spotters can do their work properly, but also to provide the athletes with enough grip on the bench. All of this is included in this piece of equipment. The specifications are: 
 
  • Meets International Powerlifting Federation ( IPF ) Guidelines
  • 3/16 wall and 11ga. Welded Tubular steel construction.
  • Powder Coated finish.
  • Oversized 24×30 Polished Diamond 6061 Aluminum skid plate for foot deck.
  • 6 position band pegs.
  • 14 position Weight saddles w/ handles and engraved numbers.
  • 11 position Over-Sized Safeties w/ engraved numbers.
  • Full Framed supported Pad
  • Plastic lined Saddles & Safeties
  • Additional adjustment hole in both Saddles & Safeties to use 1/2 hitch pin.
  • 1in high-density foam pad.
  • Made in the USA
  • Weight 370LB
  • Length 60”
  • Width 50”
  • Height 55”
 
Remember that if you have to move this one around a lot it will be shipped by freight as it is so bulky. 
 

Pros of the Reflex competition bench

 
This is a secure, sturdy bench press setup which meets the standards of the IPF. With this, even the biggest athletes can chip away at their geared 1000LB be ch presses. 
 

Cons of the Reflex competition bench

 
It is a single purpose station which means you still have to provide a squat setup for your competition. It will also be hard to ship or transport to wherever the competition is held. 
 

Alternatives to the Reflex competition bench

 
Alternatives to the competition bench are 
 
 
The Rogue combo rack is also IPF approved and can be used to squat and bench with plenty of spotter hopping around. It can also be broken apart for easier transport. If you regularly want to do powerlifting competitions in different locations this might be the better pick. 
 
The Rogue Westside bench is a beast that even your biggest athletes won’t break. In addition, it gives you more options for starting positions and attaching bands. This makes it a great work station to prepare for your next competition.
 
The Rogue AB3 is the bench of choice for weekend warriors who want to have all bench press options at home. This bench is portable and therefore not recommended when you want to bench 1000LB or do other crazy stuff that might make the bench move around.  
 

Summary for the Reflex competition bench

 
If you are looking for a stationary bench station which complies with IPF standards the reflex competition bench is a good pick for you. However, if I was to get something for competition use I would invest the extra dollars in the combo rack to get a two for one. 

Overview and review of the REP fitness AB-5000 bench

This is an overview of the REP fitness AB-5000 bench including pros, cons, and alternatives. The original was published under which rep fitness bench to buy. Follow the links for more details.

Related articles

 

REP AB-5000 Adjustable Bench zero-gap

 
The REP AB-5000 bench is the zero-gap bench option from REP fitness. The lower part of this bench can be moved in place so that the gap disappears. This is a great bench for very lifters who still want an adjustable bench to move around but no gap when flat benching. The full specifications of this bench are:
 
  • Patented: This product was designed by REP in the USA and protected by one or more issued patents.
  • 11-gauge steel frame.
  • Flat, incline, and decline positions with 7 back pad adjustments and 4 seat pad adjustments.
  • Laser-cut degree markings on a stainless steel wear guard
  • Unique pop-pin and bearing system adjustment for zero gap between seat and back pad. Adjusts in 1 second.
  • Easy to move with urethane grip handle and wheels
 
  • Total Height: 17.75"
  • Total Pad Length: 53.5"
  • Back Pad Width: 12.25"
  • Total Footprint: 8 SQFT
  • Weight Capacity: 1,000 lb
  • 3% Tolerance
 
This is a solid option at the higher price range of REP fitness bench portfolio of like the pin design and want no gap between the two pads of the bench.
 

Pros of the REP  AB-5000 Adjustable Bench

 
The pros of the REP AB-5000 bench are:
 
  • Zero gap
  • Good inside the rack bench
  • Harder cushion
  • Longer seat
  • Labeled degrees
  • A HIgher degree of safety due to push pins
 
The main feature of this bench is the zero-gap design. This makes it a good bench to keep inside your rack as it is not as easy to adjust as other benches in the REP fitness lineup.
 
It also comes with a harder cushion than some of the other REP fitness options and a longer seat than the REP AB-5200.
 
The labeled degrees on this bench are one of the biggest distinguishing features of the REP fitness compared to the competition. If I was a designer at someone else’s company I would probably copy it.
 

Cons of the REP  AB-5000 Adjustable Bench

 
Cons of the REP AB-5000 are:
 
  • Cumbersome to adjust
  • Heavy
  • Vertical instead of a horizontal handle
  • 90-degree incline
 
This is a big and hard-to-adjust bench. What you can in options for the setup you lose in speed for the adjustment itself. I also don’t like the 90 degrees top spot and prefer the 85-degree option in the REP AB-5200. The vertical handle to move the bench is also not of its time anymore as horizontal handles are easier to use.
 

Alternatives to the REP  AB-5000 Adjustable Bench

 
Alternatives to the REP AB-5000 are
 
 
The REP AB-5200 bench is the better option if you don’t mind a little gap in your bench while gaining a lot more comfort in adjusting it. I am personally not a huge fan of the safety pin design on adjustable benches as it is a pain to use. The hook system is more dangerous for your fingers but has greater ease of use.
 
The Rogue AB2 adjustable bench works with the push pin design and can also be upgraded to the AB 3 by buying a leg attachment. These are the sturdiest benches you can get from one of the best vendors in the market. Their price is off-putting. The range close to $1000. At TITAN fitness you can build an entire gym on this budget.
 
The Rogue adjustable bench 2.0 is the model a personally own and I am very happy with it. This bench can be stored upright, is beefy, and still reasonably easy to move around. The price is also not outrageous even though it comes in higher than REP fitness’s top model AB-5200.
 
The TITAN Max adjustable FID bench is TITAN’s take on a beefy adjustable bench. If you want something for a low price to rival REP fitness and Rogue TITAN is the right place to shop.
 

Conclusion for the REP AB-5000 Adjustable Bench

 
The REP zero-gap bench does what it says on the tin. You can always set it up in a way that there is no gap between the upper and lower pad. This makes it a pain to adjust at times with the pushpin system, but that is the price you pay for this feature to work.
View full post