REP fitness Hi-Temp bumper plates vs TITAN Economy bumper plates

This is a comparison between the REP fitness Hi-temp plates and the TITAN Economy bumper plates. Follow the links for more details.

Overview of the TITAN Economy bumper plates

This is an overview of the TITAN Economy bumper plates including pros, cons, and alternatives. It was published first under which titan plates to get. Follow the links for more details.

Overview of the Titan economy plates

Price $44.99 - $474.99

The economy bumper plates from TITAN are the ideal weight plates to start your home gym. They are cheap and cheerful and therefore can be bought en masse or on a small budget to start a home gym. These plates are available from 10lb to 100lb with the same diameter and varying thickness. They will fit a standard Olympic barbell and most plate trees and storage solutions for plates. They are also available for purchase in a 230lband 260 lb set. The full specifications are:

Low Bounce Rate
Stainless-Steel Insert
Extremely durable
Olympic barbell size
Quieter than steel plates
Sold in pairs of 10, 15, 25, 35, 45-pounds

Diameter: 450mm / 17.75-in.
Width: 1 – 5.25-in.
Collar Opening: 50 mm
Color: Black
Material: Rubber with steel insert

10-POUNDS:
Width: 1-in.

15-POUNDS:
Width: 1.25-in.

25-POUNDS:
Width: 1.78-in.

35-POUNDS:
Width: 2.75-in.

45-POUNDS:
Width: 3.5-in.

100-POUNDS:
Width: 5.25-in.

If you want to start your home gym on a budget, this is where to look. You can not beat Titan on Price in many categories and this is one of them. If you are looking for plates to continuously from overhead, these might not be the ones.

Pros of the TITAN bumper Plates

The pros of the TITAN bumper plates are:

Low price
Outdoor / Indoor use
Available up to 100 pounds
Lower injury risk

One of the biggest pros for the entire TITAN fitness brand is its low price compared to competitors like Eleiko or Rogue. Especially on comparable plates, the Titan versions come out at almost half of the purchase price of a like for like comparison. This is especially good if you want to equip a home gym on a very low budget and want some variety in your training. With TITAN your wallet will remain intact. Commercial gyms will appreciate that you can get quite a bit of tonnage for a low price with TITAN.

Bumper plates themselves are practical as you can use them indoors and outdoors. They are a lot more forgiving in the heat or in damp places compared to Iron plates. If you need to build your gym in an outhouse or in a basement with unfinished walls, bumper plates are probably the better bet. In addition, you can also take them outside for a workout and leave them there without feeling too guilty about it.

Another bonus is that TITAN also offers a 100lb bumper version of their plates. This is unusual as most other vendors offer this size as an Iron plate. If you lift very heavy you can use these to make it a little easier on the wrists when you bring the weight back down to the ground. Get one pair of the big bumpers on and then stack iron plates to the desired heavy load. This is a little more forgiving on your body and the floor in the long run. Apart from this, I see little use in heavy bumper plates as they take up too much space on the sleeve.

Bumper plates are also less risky to handle then Iron plates. When you get your fingers between two iron plates or knock your shin/toe against them, you are usually hurt. Bumper plates give in a little more and therefore are good for beginners or when you have teenagers training in your gym.

Cons of the TITAN economy Plates

The cons of the TITAN bumper plates are:

Quality issues
Sleeve space
Olympic training
Black

You get what you pay for and while you save quite a bit of money on the TITAN bumpers they are also more likely to break. In a commercial gym that might not be as bad, as you constantly have to renew equipment anyway, but in a home gym you might not want to have to buy your plates twice over the time of 3 years. Especially the rims where the barbells are inserted are more likely to deform than with other brands. If you do not intend to drop these, you might as well consider iron plates, which are cheaper per pound and get more weight on the barbell.

Bumper plates also take up more sleeve space compared to Iron plates for the same amount of weight. If you mainly train the bench press, deadlift, and squat with 400lb or more, consider getting iron plates instead of bumper plates. When you get to 400lbs it gets tight on the sleeves when you bumper plates only.

These bumper plates are not ideal for Olympic weightlifting. They will do, but suffer more when dropped from overhead. This is based on the core of the plate. The core of bumper plates is made of rubber with a thin metal inlay where the barbell is inserted. Olympic plates have a metal core with rubber around it. This makes the bumper plates more likely to come apart when dropped repeatedly from overhead. Still, it will take some time until you have broken them. So if you don't go through 100 overhear lifts a week or more, I would still say you can get these plates for our once a week Oly session.

The last disadvantage is that these plates are plain black. If you want some color in your life you can get the colored bumper plates from TITAN instead. Especially in a home gym scenario I always recommend this as it is just more fun than having everything in black. But I guess that is more a question of taste than anything else.

Alternatives to the TITAN economy Bumper plates

Alternatives to the TITAN bumper plates are:

the elite bumper plates from TITAN are the right choice if you put in a lot of Holy lifts per week. They are built robustly and take the beating from the drops. They cost considerably more than the economy bumper plates, but they will also take a bigger beating. The only difference to real competition Olympic weightlifting plates is that they are not colored. Compared to similar options from Eleiko and Rogue you save considerably.

If you want a bit more color in your life you can get the color economy plates from TITAN. They only cost slightly more, have the same specs than the black ones, but come in the official color denominations for the different weights of the plates. This would be my personal choice from TITAN if I was building a gym on a budget.

Cast Iron plates are a good option for anyone with limited space and budget. They are not great to look at and also a bit more awkward to handle. In return, you get the clanging and banging of metal and the maximum amount of weight you could possibly put on your barbell.

Conclusion for the TITAN bumper plates

The TITAN Economy bumper plates are a great option for anyone who wants to build a home gym on a budget. Especially if you train only three times a week and do not abuse your equipment a lot, these plates are great. In a commercial setting, these plates are great for general training where things will get knocked up anyway. If you want plates that you can drag the mud, use in the rain or extreme heat without feeling guilty., get these. If you want to impress, hold a competition, or beat the crap out of your plates, go upmarket.

Overview and review of the REP fitness Hi-Temp bumper plates

This is an overview of the REP fitness Hi-temp bumper plates including pros, cons, and alternatives. The original was published under which plates to buy from rep fitness. Follow the links for more details.

Hi-Temp Bumper plates $25

If you are feeling eco-friendly the Hi Temp bumper plates are the way to go for you. HI-temp bumpers are made from recycled material under very high temperature and are there also very durable. They are available from REP fitness in the following sizes:

5lb
10lb
15lb
25lb
35lb
45lb

Good, budget-friendly option.

Pros of the REP Hi-Temp Bumper plates

The pros os the Hi-Temp bumper plates are:

Price
Durability
Can be used outdoors
Don't stain easily

These are the ideal plates for someone who decides to do a lot of work with their plates outdoors. If you need to outfit a gym that is in a base camp or at a movie set in the middle of nowhere, then these are great. They also do not get stained as easily as colored plates which is a bonus in a dirty environment.

Cons of the REP Hi-Temp Bumper plates

Cons of the REP HI-Temp plates are:

High bounce
Sleeve space
Hard to pick up
Inconsistencies in color

The lifting mechanics of these plates are more or less identical to regular bumper plates. This means that they are not great when you lift a lot of weight in the range of 200kg plus on a regular basis and they also don't do great for oly lifts. Lacking a metal core they spin more than competition plates on an oly lift and take up more sleeve space for the same weight.

These plates also lack an extra lip to be easier to be picked up from the ground. A MInor inconvenience, but still...

I think the biggest con of HI Temp bumper plates is that you are dealing with reheated and melted tires. While this is great for saving money and I guess the environment, even though I question whether reheating old rubber to form it into weight plates is really that eco-friendly, it is a nightmare for quality control. While these plates are black in general, they are way more likely to have different shades of black compared to newly produced black bumper plates. But I guess that is not really high on your priority list if you are already considering the cheapest plates in town, which is cool.

Alternatives to the REP Hi-Temp Bumper plates

Alternatives to the REP HI-Temp bumper plates are:

The REP black bumper plates are basically the same thing, except they are not recycled and therefore easier to quality control. This means that you are more likely to get a consistent black color without any shading. The downside is that they are more expensive and also do not give you the warm feeling of buying something that has been recycled.

The REP competition bumper plates are the right choice if you have a generous budget and you are serious about your Olympic lifting. This is the best that REP has to offer in terms of precision and stability during an oly lift for plates. The downside is the price which starts at $129 for the cheapest plates instead of $25 for the HI Temp bumpers.

The Rogue HI temp plates are Rogue's cheap line of plates for the budget-conscious buyer. Of course, budget-conscious and Rogue Fitness do not really go well together in the same sentence, but if you were to get a good rack and barbell from Rogue, but want to save a little on bumpers, then these are a good option to throw in your cart. They are the closest match on the Rogue plate lineup compared to the REP Hi-Temp bumper plates.

TITAN is the cost leader in this business, so if you want to get together a whole gym with the lowest possible cost you can also get their bumpers into your cart and build an entire gym from that. The downside is that they seem to have more issues with quality control than REP fitness and Rogue fitness.

Conclusion for the REP Hi-Temp Bumper plates

The Hi Temp bumpers from REP are a good option to save some cost and make you feel better about yourself as long as you don't mind that they won't be in one continuous shape of black.