REP fitness PR-1000 rack vs Rogue RML 390F
This is a comparison between the Rep Fitness PR-1000 rack and the Rogue RML 390F. Follow the links for more details.
Rogue RML 390f flat foot
What else to consider from Rogue
Overview of RML 390F
The
Rogue RML 390F is an option from
Rogue that does not need
to be bolted
to the floor. You will get a half
rack for a reasonable price
which can be placed anywhere from your garage,
to one of the spare bedrooms or in the corner of an already established gym. It comes in black is manufactured in Columbus, Ohio.
The
390F weighs in at 295LB with a length of 48'', a width of 49'' and a height of 92.375''. Note that because of the extra beams at the bottom it is slightly higher than the average 90.375'' from
Rogue. It comes with Westside Hole spacing and ships with a Single Skinny or a Fat/Skinny pull up bar, band pegs, and J Cups. The stell notes come in 3x3'' for the uprights and 2x3'' for the bases. With this
rack, you are entering the Monster lite series of
Rogue and the accessories available in there.
Pros of the RML 390F
This rack is easy to install and light. With this, it can be added to any kind of floor that you do not want to drill into. This can be especially beneficial when a gym already has been outfitted or your landlord does not allow for these alterations to be made. With this, you are set up and ready to go in no time, while it will also take up little space.
Cons of the RML 390F
As this is a small
rack and it won't be bolted down
to the floor it is not ideal for any extreme exercises. If you kip like a beserker or regularly throw 400 pounds or more around you might want
to get a
rack that is either bigger if you don't bolt it down or a smaller
rack that can be bolted down
to the floor. You will also have
to think about where
to store your
plates as on the
rack itself might not leave you with the best experience due
to lack of space.
Alternatives to the RML 390F
The
RML 390C would be an alternative
to add color
to your life. It has roughly the same dimensions as the flat foot and can be bolted
to the ground. The price is higher, but you will get a good
rack in your choice of color.
If you don't want to increase the budget and prefer to have a rack that can be bolted to the ground for extra stability the RML3 might be the right choice for you. It comes in at roughly the same price and has also less height. This might also be a better solution if you have a low ceiling.
The RM 390F is the big brother of the RML 390F. This is the monster version of this rack. If you want to build on your investment and upgrade your rack over time, this is the option for you. There will be more upgrades available for the Monster series than for the Monster Lite is Rogue focuses on the higher price tag items first to push the portfolio forward.
Overview and review of the REP fitness PR-1000 rack
This is an overview of the REP fitness PR-1000 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.
Related articles
Overview of the REP PR-1000 Rack $289
The
REP PR-1000 is a clever rack design for a relatively small price. It comes with two pull-up bars and what I like most about it, two plate storage posts at the back to weigh it down. This rack is a great choice if you want everything in a box without forgetting everything. If you have a teenager at home who wants to lift and you are not sure what to get, this is a great option. Some of the specifications are:
-
83"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
-
26" depth inside to inside, 44" wide inside to inside
-
2x2" steel
-
Plastic lined j-cups to protect bar knurl
-
2" hole spacing throughout the working area
-
1.25" and 2" Pull up bars
-
Numbered uprights every 5th hole
-
Extra bar holders on the front of safeties, great for pressing outside the rack
-
2 Weight horns on rear base for storage and added stability
-
700lb weight capacity
-
400lb pull up bar capacity
-
400lb dip attachment capacity (dip attachment is an optional upgrade)
Solid all in one rack out of the box at a very decent price.
Pros of the REP PR-1000 Rack
For $300 you can not complain about what you are getting with the
REP PR-1000. Out of the box you are covered with safeties, plate storage, a flat foot design, and numbered posts. For a rack in this price range, this is almost impossible to beat. Sometimes safeties cost up to $100 by themselves. Then we have not even started on storage options. The
PR-1000 is a great rack for the beginner and occasional lifter.
Cons of the REP PR-1000 Rack
This rack does not weigh a lot and the steel frame is thinner and smaller compared to the
PR-5000 and
PR-4000. This makes it not an ideal rack for heavy users who put their rack through a lot of abuse. If you regularly train with more than 400lbs on the bar, use band, and chains, and do kipping pull-ups like there is no tomorrow then this is not the rack for you. If you also see your rack as an I vestment for the future and would like to make it grow you are possibly better off with a
PR-4000.
Alternatives to the REP PR-1000 Rack
The
PR-1050 is a short version of the
PR-1000 to fit I to spaces with lower ceilings. If you want to fit a rack into an attic or basement the
1050 might be a better option than the
PR-1000. The
REP PR-1100 gives you a multi-grip pull-up bar instead of plate storage and a choice of color.
The
Rogue HR2 half rack is the most popular Rogue rack on
marathon-Crossfit.com with the most viewers out of the Rogue portfolio. This rack is Rogue’s sweet spot for value for money as it combines a half rack design with their monster lite series. The biggest bonus with this rack is the plate storage you get at the back of the rack. Whether this justifies a starting price of $600 compared to $300 of the
PR-1000 I leave for you to decide.
The
TITAN T2 rack is the lower price rack range of TITAN fitness who are themselves a price leader in the home gym market. If you want to get as much metal with holes as cheap as possible without worrying about getting ripped off on eBay, Amazon, or Craigslist than TITAN is the place to go.
Conclusion for the REP PR-1000 Rack
The
REP fitness PR-1000 is a series contender if you are considering a home gym but don’t know yet whether you are fully committing. It will be relatively easy on your purse and you won’t make a mistake in the configuration and forget an annoying detail. I wish I had known about this rack when I got my first rack when I was a teenager. My mother shelled out 400 bucks on what was basically a bench with uprights. This would have been a lot better.