REP fitness PR-1050 rack vs Rogue R4
This is a comparison between the Rep Fitness PR-1050 rack and the Rogue R4. Follow the links for more details.
Overview and review of the Rogue R4 power rack
What else to consider from Rogue
Overview of the Rogue R4
The
Rogue R4 is one of the flagship racks out of the older
Rogue Infinity series. With the
R4 you get a full
rack which is made in Columbus, Ohio. The available color is black and it weighs 250LB.
The R4 Infinity rack is 90'' high and comes in at a footprint of 53''x53''. It is compatible with the Infinity accessories and lines from Rogue. It ships with J CUps,, Pin/Pipe Safeties and band pegs for the westside method. It is also designed with Westside hole spacing to enable you to use the bands for your lifting appropriately.
If you want the best of one of the outdated series from Rogue this is the one for you. It will cover all of your basic needs, just don't expect too many product upgrades as the focus of Rogue is clearly with the Monster and Monster lite series for eh time being.
Pros of the Rogue R4
You get one of the best from a bygone era of
Rogue. This is reflected in the amount of real estate you get for the price for
Rogue standards. It can also be an advantage
to get an
R4 over a Monster or Monster
rack if you have
to move the racks often. This comes in at 100LB less than its bigger brothers.
Cons of the Rogue R4
Going into the Infinity series is probably not a wise decision if you want to protect your investment long term. The rack will hold for a lifetime, you just will not find a lot of new products for it to entertain your clients. For home use, this is completely irrelevant, but if you are buying this rack to use with clients you might want to reconsider.
Alternatives to the Rogue R4
Alternatives
to the
R4 are
The
RM4 comes out of the flagship Monster series of
Rogue. With this
rack, you can choose the color and height of your purchase and have access
to Monster accessory series. This is definitely the better option if you work with a client and want
to keep adding
to your
rack in the future. The downside is the price.
The R6 is the big brother of the R4 in the Infinity series. This
rack combines a full
rack with a half
rack to provide more space for
plates and storage room. With this
rack, you will upgrade the footprint from 53x53
to 53x80.
The
R3 is the half
rack version of the Infinity series. This might be a good choice for you if you want
to save space and money. Especially if you are a smaller athlete this might be a really viable option as you don't need as much space around you.
Overview and review of the REP fitness PR-1050 rack
This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.
Related articles
Overview of the REP PR-1050 Rack $269
The
REP PR-1050 is a short version of the
REP PR-1000. I am a big fan of the design of the
REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage
, and safeties including a rack for under $300. The same goes for the
PR-1050. Some of the specifications of the
PR-1050 are:
-
72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
-
26" depth inside to inside, 44" wide inside to inside
-
2x2" steel
-
Plastic lined j-cups to protect bar knurl
-
2" hole spacing throughout working area
-
1.25" and 2" Pull up bars
-
Numbered uprights every 5th hole
-
Extra bar holders on the front of safeties, great for pressing outside the rack
-
2 Weight horns on rear base for storage and added stability
-
700lb weight capacity
-
400lb pull up bar capacity
-
400lb dip attachment capacity (dip attachment available as an optional upgrade)
This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.
Pros of the REP PR-1050 Rack
-
All in one design
-
Price
-
Short design
If you are looking for something simple and somewhat solid look no further. The
PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.
Cons of the REP PR-1050 Rack
This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the
Omni rack or
PR-5000.
Alternatives to the REP PR-1050 Rack
The
REP PR 1000 is a taller version of the
PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The
PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.
The
Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on
Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.
The
TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.
Conclusion for the REP PR-1050 Rack
If you think that the
PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the
PR-1000 instead.