REP fitness Urethane coated Equalizer plates vs TITAN Economy bumper plates

This is a comparison between the REP fitness Urethane plates and the TITAN economy bumper plates. Follow the links for more details.

Overview of the TITAN Economy bumper plates

This is an overview of the TITAN Economy bumper plates including pros, cons, and alternatives. It was published first under which titan plates to get. Follow the links for more details.

Overview of the Titan economy plates

Price $44.99 - $474.99

The economy bumper plates from TITAN are the ideal weight plates to start your home gym. They are cheap and cheerful and therefore can be bought en masse or on a small budget to start a home gym. These plates are available from 10lb to 100lb with the same diameter and varying thickness. They will fit a standard Olympic barbell and most plate trees and storage solutions for plates. They are also available for purchase in a 230lband 260 lb set. The full specifications are:

Low Bounce Rate
Stainless-Steel Insert
Extremely durable
Olympic barbell size
Quieter than steel plates
Sold in pairs of 10, 15, 25, 35, 45-pounds

Diameter: 450mm / 17.75-in.
Width: 1 – 5.25-in.
Collar Opening: 50 mm
Color: Black
Material: Rubber with steel insert

10-POUNDS:
Width: 1-in.

15-POUNDS:
Width: 1.25-in.

25-POUNDS:
Width: 1.78-in.

35-POUNDS:
Width: 2.75-in.

45-POUNDS:
Width: 3.5-in.

100-POUNDS:
Width: 5.25-in.

If you want to start your home gym on a budget, this is where to look. You can not beat Titan on Price in many categories and this is one of them. If you are looking for plates to continuously from overhead, these might not be the ones.

Pros of the TITAN bumper Plates

The pros of the TITAN bumper plates are:

Low price
Outdoor / Indoor use
Available up to 100 pounds
Lower injury risk

One of the biggest pros for the entire TITAN fitness brand is its low price compared to competitors like Eleiko or Rogue. Especially on comparable plates, the Titan versions come out at almost half of the purchase price of a like for like comparison. This is especially good if you want to equip a home gym on a very low budget and want some variety in your training. With TITAN your wallet will remain intact. Commercial gyms will appreciate that you can get quite a bit of tonnage for a low price with TITAN.

Bumper plates themselves are practical as you can use them indoors and outdoors. They are a lot more forgiving in the heat or in damp places compared to Iron plates. If you need to build your gym in an outhouse or in a basement with unfinished walls, bumper plates are probably the better bet. In addition, you can also take them outside for a workout and leave them there without feeling too guilty about it.

Another bonus is that TITAN also offers a 100lb bumper version of their plates. This is unusual as most other vendors offer this size as an Iron plate. If you lift very heavy you can use these to make it a little easier on the wrists when you bring the weight back down to the ground. Get one pair of the big bumpers on and then stack iron plates to the desired heavy load. This is a little more forgiving on your body and the floor in the long run. Apart from this, I see little use in heavy bumper plates as they take up too much space on the sleeve.

Bumper plates are also less risky to handle then Iron plates. When you get your fingers between two iron plates or knock your shin/toe against them, you are usually hurt. Bumper plates give in a little more and therefore are good for beginners or when you have teenagers training in your gym.

Cons of the TITAN economy Plates

The cons of the TITAN bumper plates are:

Quality issues
Sleeve space
Olympic training
Black

You get what you pay for and while you save quite a bit of money on the TITAN bumpers they are also more likely to break. In a commercial gym that might not be as bad, as you constantly have to renew equipment anyway, but in a home gym you might not want to have to buy your plates twice over the time of 3 years. Especially the rims where the barbells are inserted are more likely to deform than with other brands. If you do not intend to drop these, you might as well consider iron plates, which are cheaper per pound and get more weight on the barbell.

Bumper plates also take up more sleeve space compared to Iron plates for the same amount of weight. If you mainly train the bench press, deadlift, and squat with 400lb or more, consider getting iron plates instead of bumper plates. When you get to 400lbs it gets tight on the sleeves when you bumper plates only.

These bumper plates are not ideal for Olympic weightlifting. They will do, but suffer more when dropped from overhead. This is based on the core of the plate. The core of bumper plates is made of rubber with a thin metal inlay where the barbell is inserted. Olympic plates have a metal core with rubber around it. This makes the bumper plates more likely to come apart when dropped repeatedly from overhead. Still, it will take some time until you have broken them. So if you don't go through 100 overhear lifts a week or more, I would still say you can get these plates for our once a week Oly session.

The last disadvantage is that these plates are plain black. If you want some color in your life you can get the colored bumper plates from TITAN instead. Especially in a home gym scenario I always recommend this as it is just more fun than having everything in black. But I guess that is more a question of taste than anything else.

Alternatives to the TITAN economy Bumper plates

Alternatives to the TITAN bumper plates are:

the elite bumper plates from TITAN are the right choice if you put in a lot of Holy lifts per week. They are built robustly and take the beating from the drops. They cost considerably more than the economy bumper plates, but they will also take a bigger beating. The only difference to real competition Olympic weightlifting plates is that they are not colored. Compared to similar options from Eleiko and Rogue you save considerably.

If you want a bit more color in your life you can get the color economy plates from TITAN. They only cost slightly more, have the same specs than the black ones, but come in the official color denominations for the different weights of the plates. This would be my personal choice from TITAN if I was building a gym on a budget.

Cast Iron plates are a good option for anyone with limited space and budget. They are not great to look at and also a bit more awkward to handle. In return, you get the clanging and banging of metal and the maximum amount of weight you could possibly put on your barbell.

Conclusion for the TITAN bumper plates

The TITAN Economy bumper plates are a great option for anyone who wants to build a home gym on a budget. Especially if you train only three times a week and do not abuse your equipment a lot, these plates are great. In a commercial setting, these plates are great for general training where things will get knocked up anyway. If you want plates that you can drag the mud, use in the rain or extreme heat without feeling guilty., get these. If you want to impress, hold a competition, or beat the crap out of your plates, go upmarket.

Overview and review of the REP fitness Urethane coated Equalizer plates

This is an overview of the REP fitness Urethane coated equalizer plates including pros, cons, and alternatives. The original was published under which plates to buy from rep fitness. Follow the links for more details.

Rep Urethane Coated Equalizers $15

The REP Urethane coated Equalizer plates are a great way on how REP fitness thought about innovation in the fitness space and applied to their product line to make something that saves cost while still being durable. Urethane plates are said to be one of the most durable plates you can have for a gym. The problem is that it is costly to produce dumbbells or plates completely made of Urethane. So rep took their successful equalizer plate design and applied a Urethane coat to them. What you get is a very affordable, cool-looking plate for your home gym or for commercial use that is also durable. The full specifications of these plates are:

Six (6) precision-cut holes so athletes can move these plates comfortably from any angle.
Cast iron plates are coated in a commercial-grade ultra-durable CPU urethane that is highly impact-resistant and shock absorbent.
CPU Urethane has virtually no odor.
Attractive embossed logo and weight markings with white inlay.
Grip cutouts for easy handling.
3% weight tolerance.

Plate Dimensions (width/diameter)

2.5LB: 6.25” / 0.9"
5LB: 8” / 1”
10LB: 9” / 1.4"
25LB: 12” / 2"
35LB: 14” / 2"
45LB: 17.6” total diameter / 1.8" thickness

These plates are great for commercial use as they are easy to pick up from the floor and handled all kinds of exercises. If I owned my own gym for clients instead of a home gym, I would probably get these plates.

Pros of the Rep Urethane Coated Equalizers

The pros of the Urethane Coated Equalizers are:

Easy to handle
Forgiving
Cool design
Attractive price

These plates live up to the "better, faster, cheaper" credo that often cited in business to create a better solution. These plates are easy to put away, pick up from the ground, and load onto the barbell based on their six holes. The design also makes them look cool as the holes are not round but hexagonal.

The Urethane coating makes them more forgiving than regular iron plates so you will not have sharp edges or rubbing off other equipment in your gym. All of this at a very attractive price point makes this a serious contender, especially for commercial use.

Cons of the Rep Urethane Coated Equalizers

The cons of the REP Urethane Coated Equalizers:

Iron plates inside
The Integrity of the plates comprmised
No color options

I personally think these are a lot better than the regular Equlizer plates and absolutely worth the extra money compared to these. But you still have to keep in mind that you are buying an iron plate with a Urethane coating, not a Urethane bumper. This means that these plates will take a bigger toll on your floor and equipment when dropped from overhead than an actual Urethane or bumper plate. Don't believe that this behaves just like a bumper for your lifts. It behaves like an Iron plate with a bit of cushioning. If you ever have used an Iron kettlebell with plastic coating you get what I mean.

While the holes are great for moving the plates around, the integrity of these plates is compromised. They are more likely to crack or warp under heavy use than plates that have a full disc. In a mass use scenario where you have spare plates and can have a rollover contingency for a franchise that does not matter that much, but for your home gym it does matter when one or two of your 55s crack and you are short for your heavy cycles.

Compared to other bumper plates you have no color options on the equalizers. If you wanted to get black anyway, no harm done.

Alternatives to the Rep Urethane Coated Equalizers

Alternatives to the REP Urethane coated equalizers:

REP equalizer plates
REP rubber coated Olympic plates
REP HI temp bumper plates
Rogue 6 shooter plates
Rogue HI temp plates
TITAN bumper plates

The REP equalizer plates are an alternative to save a little money for more or less the same thing. Especially if you are not intending to use the plates for Russian twists or other exercises where you hold the plates you might as well go for the non-coated option and get some spare change to buy something else.

The Rep rubber-coated Olympic plates are an even more budget optimized option out of the REP plate lineup. You can also carry these around very easily and they do the trick of providing weight to your barbell. I personally don't like their design and would rather buy the Coated Equalizers. But that's just me.

The REP HI Temp bumper plates are in my opinion the better option for someone who is intending to do a lot of CrossFit or Olympic lifting at home but is on a tight budget. For this type of training, you need on average less weight on the bar than for powerlifting so the thickness of the plates does not matter as much. What does matter is the damage to your equipment and floor when dropping weights from overhead which will be considerably less with the bumpers than with the equalizers. Yes, the rubber coating does help, but you are still dropping plates with a metal core from overhead.

The Rogue 6 Shooter plates are in my opinion the right plates for someone who mainly does powerlifting at home, but is fed up with how hard iron plates are to handle. These will be easier on your back and you will be delighted that it has become a lot easier to load and deload your barbell with those 700 pounds you pull in meet preparation. They also make that nice rattling metal sound that anyone who can lift more than three wheels for reps loves. They are not great for commercial use as they are simple iron plates with holes in them. For that scenario, the urethane-coated equalizers are still better.

Rogue HI temp bumpers are an alternative to consider to the REP HI Temp bumpers if you are mainly into oly lifting. Stay away from the equalizers if you are intending to drop your plates from overhead often and compare the low-end bumper options for your need between different vendors.

TITAN is the friend of everyone who wants to make their home gym dollar stretch as far as possible. As long as you do not mind minor quality issues and know how to assemble things without instructions or sand down / widen some drilled holes, TITAN is your best option to get the most home gym for your buck.

Conclusion for the Rep Urethane Coated Equalizers

The REP Urethane Coated Equalizers are from my perspective some of the best plates in the market for commercial use. They look good, are practical, do not cost a lot and will not be wrecked by the average joe in your gym. You also can get quite a lot of them on a plate tree which is also important for commercial use. If your clientele is heavily into Oly lifting you might get real bumpers instead. For a home gym, I also think that they are nice, but I would lean to more upmarket plates or something really cheap like simple iron plates in this scenario.