Run Faster, Lift stronger, Think deeper

Rogue Monster Lat pull down stand alone vs TITAN plate loadable functional trainer

Written by Pascal Landshoeft | Dec 18, 2020 5:00:00 PM

Rogue Monster Lat pull down stand alone vs TITAN plate loadable functional trainer

This is a comparison of the Rogue Monster Lat pull and the TITAN plate loadable functional trainer including pros, cons, and alternatives. Follow the links for more details.

 
 

Overview and review of the TITAN plate loadable functional trainer $749

This is an overview of the TITAN plate loadable functional trainer including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Related articles

 

Overview for the TITAN Plate loaded functional trainer

 
The TITAN plate loaded functional trainer is a great budget option to get a multi directional functional trainer into your home. Especially if you have already a rack and barbell setup at home and just not to reuse the plates for this machine. Functional trainers are great to pack a lot of exercises in one space. With this machine from TITAN you can get in your rows, vertical pulls, flyes, and even use it for deadlifts and squats. All the needed handles and accessories are included in the shipping. The full list of features includes:
 
- Comprehensive pulley options including lat, row, and pulldown
- Two 9 1/4” Olympic plate sleeves
- Tough steel design will last for years to come
- Pull-up bar installed at the top
- Sleek black and silver design
- Titan Fitness faceplate included
 
- Max user load: 390 LB
- Overall Footprint: 61” Width x 53” Depth
- Loadable Sleeve Length: 9 1/4”
- Overall height: 81”
- Side handle length: 5”
- Side handle diameter: 1”
- Row handle length: 14 1/4”
- Row grip length: 5” (each)
- Row handle diameter: 1”
- Lat pulldown handle length: 37 1/2”
- Lat pulldown grip length: 5”
- Lat pulldown handle diameter: 1”
 
This is a great budget option for a functional trainer for home gym use. In a commercial setting there might be too many moving parts.
 

Pros of the TITAN Plate loaded functional trainer

 
 
  • Price
  • Multi purpose training
  • Exercises per square foot
 
The best thing about the TITAN plate loaded functional trainer is the low price. Functional trainers can cost up to $5000 depending on the make, quality, and mechanics used. With this you can have an entire gym in your basement for $700 assuming you already own plates. If you do not a set of TITAN plates can be had for $375. TITAN is already budget orientated as a manufacturer and this is a budget design. If you are strapped for cash, this is a good investment.
 
The pulley system on this functional trainer works in many directions. You can pull up, down, and also use the machine for horizontal pulls. You get everything you need to build muscle and build an attractive physique. It goes above and beyond home trainers that only use your body weight as you can use the plates to continuously get stronger.
 
If you look at how many exercises you can do in small space, this machine is also great. It takes up the same space as a leg press machine, but you can do so many more exercises on it. This makes it a good choice for rehab centers, yoga instructors and other lifestyle and health out fits that want to add some gentle strength training to their services.
 

Cons of the TITAN Plate loaded functional trainer

 
 
  • Plate loaded
  • Makeshift
  • Many moving parts
 
The fact that the plate loaded functional trainer is plate loaded makes it cheaper, but also means that you have to have plates and storage for them first. Also handling the plates can be a pain, as you need to fit them onto the pins and get them off. If you like to "run the rack" in your exercises, this machine is more of a pain than a gain. The many plates can also be a hindrance when you are working with a client and create a trip hazard.
 
The hole construction has a bit of a makeshift feel about it. This is often the case when the exercise machine is majorly a combination of pulley which have been connected on a frame. That is the entire idea of this machine, but it doesn't make it something that I want to use on a regular basis. If you are not strapped for cash, you might want to opt for the functional trainer from TITAN that includes to weight stacks. If your commercial gym wants to convey a slick and hip image to your clients this might also not be the right choice. This model screams iron den.
 
The many moving parts also make the assembly of the TITAN plate loaded functional trainer complex. TITA is known for bad manuals and occasional missing out in small parts in the shipping. If you are missing a small part in your shipment it is next to impossible to source it separately from the vendor. You will either end up with more big parts to just get one small part or at your local DIY store.
 

Alternatives to the TITAN Plate loaded functional trainer

 
Alternatives to the plate loaded functional trainer are:
 
 
The TITAN functional trainer is the big brother of the plate loaded functional trainer. It ships with two 200lbs weight stacks. While these can have their own challenges, this is the cleaner and more stable installation once it is set up. If you buy a functional trainer as an addition to a health/spa or yoga gym, this is the better choice. This is also the better choice in a gym with high footfall as it creates fewer opportunities to break the machine while loading the plates. The only disadvantage is that you have to fork out about $1300 more to get this version of the functional trainer.
 
The TITAN lat tower is a great addition to any home gym that means business. Usually you will already have a couple of kettlebells, dumbbells, and a rack with plates and a barbell before considering this. As a second purchase to add a sizable machine to your home gym the lat tower is a better choice than the plate load able functional trainer. The quality of the pulleys is better, you can load it with up to 300lbs, and it will provide a weight stack to your for a different form of training for you.
 
The TITAN hack squat leg press is also slightly more expensive, but provides a good focus on your legs. If you have the space and prefer dedicated machines over multi functional machines in your training, than you can consider the hack squat leg press machine as a 2 in 1 for your home gym. For commercial gyms this is not necessarily the best option as 2 for 1 always means you need more instructions for the machine or higher injury risk due to using it incorrectly.
 

Conclusion for the TITAN Plate loaded functional trainer

 
The TITAN plate loaded functional trainer is a great solution for a dorm basement where everyone chips in. Especially if there are already some plates available. If you are building a garage gym in your home and you have the spare change I would lean more towards the TITAN functional trainer or the lat tower as an addition to your already existing rack or as a training station for the entire family.

Overview and review of the Rogue Monster Lat pull down stand alone 

 

Price: 2.950

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster lat pull down will create more bats in your gym. See the details in this article.

 

Related articles

Overview of the Rogue Monster Lat pull down

 
The Monster Lat pulldown Standalone is a lat pulldown machine for the expert athlete. As with all Rogue equipment this machine is built like a tank. The lat pulldown machine is a great example of how Rogue takes pride in what they do and takes their customer feedback series. 
 
If you read between the lines you can see that the pulley, the bar, cable, and Steel eye were not up to Rogue's standards in the V1 of this machine. All of these parts have been consequently brought in-house and are not bought from 3rd parties anymore. These things are normal when new production lines are being built, a new market is tested and new processes build around them.
 
At least Rogue took the right learnings from this and perfected their Rhino launch. The prone leg curl and the ISO leg press have not gotten a V2 overhaul yet whereas the Lat pull down has. Be aware of this when you buy from Rogue. I am positive they will accommodate valid feedback, especially on big orders. If you buy for your home gym, maybe wait on the leg press and curl until there is more feedback available or find a gym nearby to test them.
 
The Rogue Lat pulldown weighs 605lb and offers up to 300lb resistance in plates in 10lb increments. It has a footprint of 40'' by 60''. It is 60'' long, 40'' wide and 96'' high. The steel notes are 3x3 11-gauge steel just like the rest of the Rogue Monster series.
 

Pros of the Rogue Monster lat pull down

 
This lat pulldown is also a rowing machine so you get two for the price of one. The difference to many other rowing machines is that Rogue came up with an idea that does not make the bench longer. By positioning a footrest under the seat this lat pulldown machine turns into a rowing machine without adding extra length. 
 
Another big pro is that this machine allows the use of bands with the lat pull. This is very unique and I have not seen many machines like this. Especially when you have experienced athletes you will appreciate that you can work with bands.
 

Cons of the Rogue Monster Lat pull down

 

A lat pulldown is a big machine. It will take up quite a bit of space where a pull-up bar might create a similar effect. Especially in a home gym scenario, you might be better off getting dumbbells and a pull-up bar which takes up less floor space. As with other machines, the pulley system takes maintenance. Oiling this system and keeping it in check might not be for everyone.
 

How many clients do you need for the lat pull down?

 
If you think that the Lat pulldown will bring you 10 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 6.000$ net new revenue against an investment of 2.950$. Adjust the numbers for your own gym accordingly.
 

Alternatives to the Lat pull down from Rogue

 
Here are some alternatives to the Rogue lat pull down
 
1x Rhino belt Squat Rack @ 2750$
 
The Rhino belt including the half rack will give you a better pulley system and the necessary rack to play around with it. It will not exactly be the same and the workarounds might be not ideal, however, it is possible. I would also be very surprised if Rogue did not capitalize on the opportunity to deliver a system that combines the RM6 and Rhino to a fully built all-purpose gym station. Stay tuned for that one.
 
1x Monster Lite Rig @ 2.495$
 
A monster lite rig will provide you with
 
  • 4 Squat/ Bench Stations
  • 8 Pull up Stations
 
For less than the price for one lat pulldown machine. If you are aiming to open a small CrossFit gym this is the way to go. This also shows you that Rogue still has to work on optimizing their costs on building machines. The upshot is that you will get a machine that is fully made in the US. If you work for the government this might even be a requirement for purchase. 
 

Conclusion

The Rogue Monster lat pull down is a very solid machine for your gym. If you do not want to compromise and attract the biggest and best athletes to your gym, this is the one to go for. 
View full post