TITAN seated leg curl machine vs Floor Glute and hamstring developer

This is a comparison between the TITAN seated leg curl machine and the TITAN Floor Glute and Hamstring Developer including pros, cons, and alternatives. Follow the links for more details.

Overview and review of the TITAN Floor glute and hamstring developer $259

This is an overview of the TITAN floor glute and hamstring developer including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview of the Titan floor and glute hamstring developer

The TITAN floor and glute hamstring developer is a compact machine that you can easily transport and lean against a wall to develop your glutes and work your core. The price is low and it can also be stored against a wall easily to save space in a crammed home gym. If you want a Glute and hamstring developer in your hoe gym, but always though other solutions are too bulky, this is the solution for you. The full specifications of this machine are:

- Handle and wheels for easy mobility and storage.

- 6 adjustable foot roller positions.

- Low profile allows for easy storage.

- 2" thick pad and 4" thick foot rollers for your safety and comfort.

- Heavy duty steel construction.

- Pad Dimensions: 23" x 49" x 2"

- Overall Footprint: 24.5" x 58"

- Foot Roller Length: 7.75" per foot.

- Foot Roller Diameter: 4"

- Adjustable Foot Roller Height: 2.5"-7.5"

- Foot Plate Dimensions: 19.5" x 10"

- Material: Steel

- Weight: 115 LB

This is a good compact solutions for small gyms or physiotherapists with small offices where they want to work with their clients on rehabilitation after a sports injury.

Pros of the Titan floor and glute hamstring developer

The pros of the TITAN floor and glute hamstring developer are:

Compact design
Low price

The two main positives about this Glute ham developer are its compact design and low price. Compared to the bigger machines this cuts your invest by two thirds and you usually do not load Glute ham development exercises heavy anyway. This can be stowed away under the bed and wait for you in the mornings or evening to do your prehab and rehab before you do your heavy lifting somewhere in the day.

Cons of the Titan floor glute and hamstring developer

The cons of the TITAN floor glute and hamstring developer are:

Can move around while you are exercising.
Close to the ground might not be for everyone

If you are giving it your all on this machine with yanking movements it can start to travel on the floor. If you get this and use it regularly I recommend that work with very controlled movements. With the bigger machines you can get away with more and of course also fit bigger athletes on them to train.

With this machine you are very close to the ground. Depending on where your gym is, what type of floor you have and how regular it is being cleaned not everyone might like to have their face in the mud.

Alternatives to the Titan floor glute and hamstring developer

Alternatives to the TITAN glute and hamstring developer:

Titan glute and hamstring developer
Titan H-PND
Rogue Donkey

The TITAN Glute and hamstring developer is the best machine you can get from TITAN to train your posterior chain. It combines a GHD and a reverse hyper based on the Economy H-PND. The pad might be a bit small depending on your own size, bu overall this is a solid option for all your posterior chain needs if you can fit it in your gym.

The TITAN H-PND is the biggest reverse hyper you can get From TITAN. It has a massive table and steel tubes. The padding can take almost anyone on and you will not be disappointment. This is a good option for a Iron den gym that is looking into getting a reverse hyper and a separate GHD.

The Rogue Donkey is the current gold standard in the industry for reverse hypers and GHD machines. It is build like a tank, has a great pad and is finished with great stitching and leather. All of this also comes at a high price and space requirements. We are in the range of $2000 for this machine and it takes up considerable space.

Conclusion for the Titan glute and hamstring developer

The TITAN Glute and hamstring developer is a great option for a home gym or a commercial gym with very limited space. It is easy to store and move and does not cost a lot to train your glutes. The only downside is that it can not be loaded with weight and might move around on the ground of your exercising like a maniac on it.

Overview and review of the TITAN seated leg curl machine $469

This is an overview of the TITAN seated leg curl machine including pros, cons and alternatives. This article was originally posted in Which gym machine to get from TITAN. Follow the links for additional information.

Overview of the TITAN seated leg curl machine

The TITAN seated leg curl machine is a simplified version of the seated curl you find in almost any gym across the country. This seat curl is plate loaded instead of weight stack loaded. This drives down the cost of acquisition and keeps more money in your pocket. The Titan seated leg curl machine is a good fit for home gyms with space or a private / commercial gym with a few members who know what they are doing. In large scale commercial setup you might want to invest in a beefier machine including a weights stack. The full specifications of the TITAN seated leg curl are:

- Perform leg curls and leg extensions from the same seated position.

- Adjustable thigh pad design makes getting in and out of the machine much more efficient than the competition's cumbersome tube adjustment design.

- Rotary leg clamp mechanism and pop pins allows for easy adjustment and achieving full reps every time.

- Adjustable seat depth and seat angle positions to suit different size athletes.

- 4 Bolt down holes for concrete anchors or take advantage of the counter-balance weight post for stability without permanent mounting.

- High quality steel construction for a solid, long lasting design.

- Footprint: 36-in W x 34.5-in L.

- Floor Space Required: 4' W x 5' L.

- Thigh/Foot Roller Diameter: 5-in.

- Thigh/Foot Roller Width: 17-in.

- Seat Depth Positions: 7

- Seat Angle Positions: 3

- Weight Post Diameter: 1.95-in.

- Weight Post Length: 10-in.

- Weight Capacity: 220 lb.

- Product Weight: 117 lb.

This is a good addition to a home gym of a bodybuilder who has a barn or two space garage for the gym. A big basement also helps. If you are a commercial gym focused on rough, hard iron this plate loaded machine will use do well with your clients. If you have high footfall and want to appeal to the general population you might want to invest into something a little more upmarket.

Pros of the TITAN seated leg curl machine

Pros of the TITAN seated leg curl machine are:

Price
Plate loaded
Extension and curl possible

As with all TITAN machine the Titan leg curl has been minimized to save cost and keep money in your pocket. Compared to professional grade machines from precor or other vendors you save more than half. Especially when you are the only one using the machines this is a good strategy to follow to keep yourself and the family happy while still training hard at home.

The fact that this machine is Plate loaded also saves further cost. You are not paying for weights for each of the machines, as you will reuse the plates you already own. If you do not you can purchase a set of plates from TITAN for $375.

This machine also works in both directions for curls and extensions. While this has become an industry wide standard you can still find some machines where you can only do one thing based on how the lever arms are made.

Cons of the TITAN seated leg curl machine

The cons of the TITAN seated leg curl machine:

Space requirements
Plate loaded
Build

The Titan seated leg curl machine will take up extra space in your gym. In a home gym that might not even be an option or you have to compare it to other smaller machines. These could be a preacher curl machine or calf machine. In a bigger gym you can always find a corner to place a smaller machine like this.

While plate loaded is a good approach for home gyms and to save costs it is not ideal for gyms with many clients. If you have high traffic it is better to the weights with the machine permanently to create fewer trip hazards and make the exercises more beginner friendly.

This seated leg curl has been built with the average person in mind. It is not overbuilt for massive athletes like the Rogue and Eleiko equipment. If you are 2m talk and weigh more than 125kg you might want to look something more upmarket.

Alternatives to the TITAN seated leg curl machine

Alternatives to the TITAN seated leg curl machine are:

The TITAN lying prone leg curl machine is a 2 for 1 machine for leg development. If you can fit it, it might make a better choice for your home gym as the lying prone leg curl I closes the seated curl option.

If you have covered all of your leg requirements already you might want to look into the TITAN tibia Dorsi calf machine. This will also train the calves and not eat up too much into your space as it does not swing like the leg curl machine.

The TITAN smith machine is a good option for anyone who does not trust free weights. It provides storage for plates and takes up the footprint of one rack. I am personally not a great fan of smith machines, but if you mainly train for shaping up rather than maximum strength they are an option.

Conclusion for the TITAN seated leg curl machine

The TITAN seated leg curl machine is a nice small machines for a spacious home gym. The plate loaded design saves cost. The Titan design is also learned back to realize additional savings. In a commercial setting you might want to get something beefier that includes a weight stack.