REP fitness PR-1050 rack vs Rogue SM2.5 squat stand
This is a comparison between the Rep Fitness PR-1050 rack and the Rogue SM2.5 squat stand. Follow the links for more details.
Overview and review of the Rogue SM 2.5 Monster squat stand
What else to consider from Rogue
Overview of the SM 2.5
The
Rogue SM 2.5 Squat stand uses the beams of the
Rogue Monster series and creates a very sturdy squat stand. This stand is built in Columbus, Ohio and comes in black. With the flat foot design of
Rogue, it does need to be bolted to the ground.
The SM2.5 has 1000 lb weight capacity and comes in at a height of 103''. The steel notes are made from 3x3'' gauge steel. The overall footprint comes to 50''x54''. This stand comes with J Cups in the delivery to get you up and running.
Pros of the SM 2.5
A squat stand is a great alternative when you want to do weightlifting training. It gives you more room to throw the weight about than in a
powerlifting cage. It is also less material in case you have to fill an entire gym, have to transport the stand often or want to able to change things quickly. The
SM 2.5 will be easy to transport and serve you well in these scenarios.
Cons of the SM 2.5
A squat stand by itself is not ideal for
powerlifting. If you count in the safety arm spotters you will be close to $1.000 again and might as well go for a full rack that costs a bit more but leaves you with a full cage and safety for the bench press without having to buy extra accessories.
Alternatives to the SM 2.5
The
SM3 comes with the same specs except that the height is different. This option is for your tall athletes. If you want to outfit an entire gym maybe mix the
SM3,
SM2.5, and
SM2 to serve various heights. It is also a good way of adding a very high pull up bar to your gym without having to invest in an entire rig or rack.
The
SM2 is the smallest of the
Rogue Monster squat stands. It comes in at 90.375''. This might be a good option when your ceilings are low or you are a smaller athlete with no need for a very high pull up bar.
The
RM4 Fortis rack is an alternative to the squat stands which comes in at roughly the same price if you count the
spotter
arms. If you want to
powerlift
this might be the better investment of your money than having a squat stand.
Overview and review of the REP fitness PR-1050 rack
This is an overview of the REP fitness PR-1050 rack including the pros, cons, and alternatives. This article was originally posted in which rack to buy from REP Fitness. Follow the links for more information.
Related articles
Overview of the REP PR-1050 Rack $269
The
REP PR-1050 is a short version of the
REP PR-1000. I am a big fan of the design of the
REP PR-1000 for a small budget as it takes care of a pull up bar, plate storage
, and safeties including a rack for under $300. The same goes for the
PR-1050. Some of the specifications of the
PR-1050 are:
-
72"(height) x 48"(width) x 48"(depth) - 58" wide at rear bottom brace
-
26" depth inside to inside, 44" wide inside to inside
-
2x2" steel
-
Plastic lined j-cups to protect bar knurl
-
2" hole spacing throughout working area
-
1.25" and 2" Pull up bars
-
Numbered uprights every 5th hole
-
Extra bar holders on the front of safeties, great for pressing outside the rack
-
2 Weight horns on rear base for storage and added stability
-
700lb weight capacity
-
400lb pull up bar capacity
-
400lb dip attachment capacity (dip attachment available as an optional upgrade)
This is a good beginner rack or something for the occasional lifter which is compact, easy to purchase, and easy on the budget. If you are serious about your home gym you might feel that this is a little flimsy and cheap in the long run.
Pros of the REP PR-1050 Rack
-
All in one design
-
Price
-
Short design
If you are looking for something simple and somewhat solid look no further. The
PR-1050 gives you everything you need in a good package for a reasonable price. If you are a beginner or low-weight lifter this rack might as well be everything you need.
Cons of the REP PR-1050 Rack
This rack is not for powerlifting pros and anyone who works with bands and chains in the range of 400lbs or more. You cannot bolt it to the ground and it does not weigh a lot. So if you are a seasoned strength athlete that weighs more than 100kg, this becomes a toy even if it can take 700lbs. For this scenario go for the
Omni rack or
PR-5000.
Alternatives to the REP PR-1050 Rack
The
REP PR 1000 is a taller version of the
PR-1050 which allows you to have more freedom for overhead presses and pull-ups of the height of your ceiling lats along. The
PR-1100 give you choice of color and a multi-grip pull-up bar but strips the plate storage at the back for the same price.
The
Rogue HR2 is a solid half-rack from Rogue Fitness that is based on the Monster Lite series and very popular on
Marathon-Crossfit.com . One of the biggest advantages of this rack is that it provides a lot of plate storage. It also makes you part of the Rogue Monster lite ecosystem which might be a better investment long term than the low level REP fitness ranges.
The
TITAN T2 rack is the low price range of a low price competitor. If maximum savings is what you are after than this the right rack at the cost of the risk of minor quality issues.
Conclusion for the REP PR-1050 Rack
If you think that the
PR-1000 is a great idea but you are worried about it fitting into your basement or attic, than this is a great option. If you have the space, go for the
PR-1000 instead.