Run Faster, Lift stronger, Think deeper

Rogue anvil grip vs pull up spheres

Written by Pascal Landshoeft | Sep 27, 2020 4:00:00 PM

Rogue anvil grip vs pull up spheres

This is a comparison between the Rogue anvil grip and the monster lite pull up spheres including pros, cons, and alternatives. It was published first under which grip strength tool to get from Rogue. Follow the links for more details.

 

Overview and review of the Rogue monster lite pull up spheres

This is an overview of the Rogue Monster pull up spheres including pros, cons, and alternatives. It was published first under which grip strength tool to get from Rogue. Follow the links for more details.

Related articles

 

 

 

 

Overview of the Rogue monster lite pull up spheres 

Price: $57.50
 
The rogue monster pull up spheres are compatible with the monster lite and I do its racks and rigs from Rogue. You can combine several spheres on a rig to create a nice climbing Parcours or attach them to your rack to train your grip. The spheres are available in two sizes for progression. The full specifications of the spheres are: 
 
  • Made in America
  • Diameter options: 5"
  • Sold in Pairs
  • 9-gauge Steel Construction with Black Powdercoat
  • Compatible with standard RML-3, RML-4, RML-6 Power Racks and Monster Lite Rigs with XML-70 Beam or 43" Monster Lite crossmembers
  • Thread optimized for 3" depth tubing of a crossmember/upright with 0.625" diameter holes
  • For safety reasons, any rack should be securely fastened to the ground before using Pull-Up Spheres
This is a little extra, especially in a facility with a long rig to switch things around a little. 
 

Pros of the rogue monster lite pull up spheres 

 
The pros of the rogue monster lite pull up spheres are: 
 
  • Cheap 
  • Compact 
  • Nice switch up 
 
The monster lite spheres are relatively cheap for Rogue equipment. At $50 you get a nice pair which will do you or your clients a great service for getting a better grip. They are easy to install and can be lit in different places, especially in a big rig or daisy-chained racks. They are also a nice alternative to a regular pull up bar. 
 

Cons of the rogue monster lite pull up spheres 

 
Cons of the rogue monster lite spheres are: 
 
  • Need to be attached to a rack 
  • Not compatible with monster series 
 
Compared to other grip strength options the spheres only work in conjunction with a rack. That makes their use cases limited compared to the very similar cannonball grips. You can also not use them with the rogue monster series which is currently taking over the Rogue Production lines. 
 

Alternatives to the rogue monster lite pull up spheres 

 
Alternatives to the rogue monster lite pull up spheres are: 
 
 
The crown pull up bar comes in at $225-$255 depending on your type of rack. With this, you get two different sized spheres and all the straight pull up setups you can think of. The only downsides are the price and that it is not great for kipping pull-ups. This is a great option for any home gym owner to make the most of their space. 
 
The cannonball grips are al ist the same idea as the spheres with the bonus that they can also be attached to barbells, kettlebells, and dumbbells. If you are more thinking about your grip strength than developing a better pull up, these might be the more versatile option with a very similar outcome. You will also not need to have a rack to attach them to.
 
The rogue climbing crossmember comes in at $85 and can be attached to the monster ted lite or monster series of Rogue. If you wanted to provide climbing options for your existing rig, this is the better option than the spheres. You pay minimally more and get many more grip options. For home gyms this probably the inferior choice as they usually lack the width or height to make the climbing crossmember fun. 
 

Conclusion for the rogue monster lite pull up spheres 

 
The pull up spheres are a nice addition in a corner of a big rig where you do not know what else to do to make it a little more exciting. They are also a good option when you want something a little wider in diameter than the cannonball grips. Otherwise, a crown pull up bar and/ cannonball might be the better investment for a home gym and the climbing crossmember for a commercial gym. 
 

Overview and review of the Rogue anvil grip

This is an overview of the Rogue anvil grip including pros, cons, and alternatives. It was published first under which grip strength tool to get from Rogue. Follow the links for more details.

Overview of the Anvil grip

 
The rogue anvil grip simulates a time old feat of strength. Many attempted to lift an anvil by the horn. The cone shape of the anvil grip simulates this. To increase the weight you can attach it to a loading which Rogue sells separately. The specifications of the anvil grip are: 
 
  • Made in the USA
  • Machined from a Solid Piece of Steel
  • Weight (Unloaded): 12.33 LBS
  • Length: 11” (Anvil itself), 13.5” (Anvil + Eye Bolt)
  • Tapered Cone-Shape design: 3” dia. at the base, 0.75” dia. at top
  • Eye Bolt at the base for attaching weight via loading pin (pin sold separately)
  • Engraved Rogue branding
  • Finish Options: Bare Steel or Black Oxide
This is a solid piece of steel to varying your deadlift and grip strength. 
 

Pros of the anvil grip

 
The pros of the anvil grip are: 
 
Good quality 
Simple design 
Challenge for the grip 
 
This is a great tool for working on your grip strength. The cone shape gives you a different challenge than the usual bar grippers most people use. A great addition for someone who almost has everything but wants to challenge his or her grip even further. 
 

Cons of the anvil grip

 
The cons of the anvil grip are: 
 
  • Needs plates and pin to function 
  • Very specialized equipment 
  • High likelihood to gather dust 
 
While these are a good addition to an existing for someone who is serious about grip strength, for some others this might just be a fun little purchase that is ultimately money down a hole. Be sure you have the plates and you are also investing in a loading pin. Once you are of this mindset you will probably also get the dinnie rings and other grip attachments from Rogue. For someone who is very busy or not dedicated to grip strength this can be a purchase that will lie around in your gym more than you use it. 
 

Alternatives of the anvil grip 

 
Alternatives to the anvil grip are: 
 
 
For the average Joe, a set of pinch grip and cannonball grip handles are probably the better choices. They are easier to handle with kettlebells or to hang from your rack. Therefore they do not necessarily need a loading pin to function. This gives you more versatility for a little more spend then for the anvil grip. 
 
The dinnie rings are the ultimate hardcore grip strength test from Rogue. If you want to train in the highest levels you will probably get the anvil grip and the dinnie rings. If I had to choose between the two, which I wouldn’t as I am a sucker for complete training sets, I would go for the dinnie rings instead of the anvil grip as it is the cooler record to chase. 
 

Conclusion for the anvil grip 

 
The anvil grip is a must-have for any serious strongman or strength athlete who is serious about their grip. It is cheaper to co nine the anvil grip with a loading pin than to get anvils of different weights. If you want to save money and start out with grip strength training I would recommend going with a combination of pinch blocks and cannonballs first and then graduate to dinnie rings and the anvil at a later point when those get to easy / you have reached your goals on those. 
View full post