Rogue power pin vs pinch blocks
This is a comparison between the Rogue power pin and the rogue pinch blocks including pros, cons, and alternatives. It was published first under which grip strength tool to get from Rogue. Follow the links for more details.
Overview and review of the Rogue pinch blocks
This is an overview of the Rogue pinch blocks including pros, cons, and alternatives. It was published first under which grip strength tool to get from Rogue. Follow the links for more details.
Related articles
Overview of the Rogue pinch blocks
Price: $49-$62.50
The
Rogue Pinch blocks are simple but effective. They come in three different sizes, 3x3,2x3, and 1.5x4. The thinner the block, the harder it is to hold onto. This is a simple tool that will improve your grip for a long time to come and has many applications. You can hold weights or hand from a
rack as long as possible. As with all rogue products the finish is great and they hold chalk well.
Pros of the Rogue pinch blocks
-
Cheap
-
versatile
-
Hardcore
-
Easy on the hands
The
pinch blocks are relatively cheap and have a big impact on your grip strength. They are easy to use, as long as you know your way around a carabiner and a strap. Compared to other hardcore training tools for your grip, they are easier on the hands and less likely to rip your calluses and skin on the fingers.
Cons of the Rogue Pinch blocks
Pinch grip blocks are challenging and therefore not for beginners. If you consider buying without any prior experience in grip training, be prepared to get frustrated fast. In this case, you might be better off to get a set of low-level
Captain of Crush grippers or the
grandfather clock grips. The setup with a carabiner and strap is also not for everyone as it can be fiddly.
Alternatives to the Rogue pinch blocks
The
cannonball and
grandfather grip have roughly the same price. Both of them are easier for beginners than the
Pinch blocks if you want to progress slowly. I personally see them as a set to be bought together to keep things interesting, but not everyone wants to invest that much money from the start for something they are not sure about.
If you prefer to work with a bar rather than an attachment to a random weight than the
branch and beam are for you. The
branch and beam are bars that have been made fat to be better for grip strength training. They are a good option to train lifts in strongman competitions like lifting wagon wheels or car axles.
Conclusion for the Rogue pinch blocks
The
pinch blocks are a must for anyone serious about strength training. They are a good purchase together with the
cannonball and
grandfather grips. Be aware, that these are the more advanced options and that you will start humbled. With time, your hands will turn into beasts.
Overview and review of the Rogue power pin
This is an overview of the Rogue power pin including pros, cons, and alternatives. It was published first under which grip strength tool to get from Rogue. Follow the links for more details.
Overview of the Rogue power pin
Price: $136.50
The
Rogue Power pin is a simple tool for narrow grip deadlifts like the power stairs or duck walks. It is mainly a tool for strongmen training and can also be used to improve your grip in general. It can be loaded up to 500lbs and there is also a ring attachment for it for $50. This is a practical, small tool to especially train weight holds in your home gym or simulate some strongman events. The full specifications are:
-
Made in America
-
Diameter: 1.96" loading pin, 4.5" ring
-
Length: 12" loadable length
-
Weight:12.5LB, 500+LB weight capacity
-
10 holes spaced 1” on center for an adjustable height range of 19.75” to 28.75”
-
Black Powder Coat Finish
-
Available as Fully Assembled Unit or Just Handle (for use with original Rogue Power Pin)
A small amount of money well spent to put some variety into your deadlift training.
Pros of the Rogue power pin
Good price
Simple effective tool
Good finish
With these kinds of tools, it is all about making them easy to use and fit well with the plates. Rogue did a good job on the detail which otherwise can turn something simple into something useless. If you are considering a
trap bar a
power pin is cheaper and more fun to use.
Cons of the rogue power pin
-
Only loadable to 500lbs
-
Not versatile
The
power pin can only be loaded to 500lb. While this is more than enough for most humans, this is a tool that will also raise interest for the strongest among us. They may want something that can take even more weight. In addition, the only thing you will do with the
power pin is to pull something off the floor. For $140 you have other options like jumping ropes or slam balls that can be used in more ways.
Alternatives to the Rogue power pin
The
rogue trap bar would be another way to vary your deadlift and grip training. A
trap bar would still enable you to lift the weight with your arms outside the legs. This is usually a better variation for beginners. A
trap bar can also be loaded with more weight. Downsides to a
trap bar are the bigger price tag and space requirements.
The
anvil grip attachment is an interesting twist on deadlifts and holds. You will need a
power pin to make it work but it will be worth it. It is shaped like a cone and comes in two different colors, black, and chrome. This is a great tool to collect with other grip strength utensils to let nothing escape your hands.
If you want to get your core more rigid to be able to pick up things from the ground faster and stronger you can also get a decently sized
MK D-ball. For the budget of the
power pin, you can get a 40lb to
50lb ball. This leaves with more options for carries, slams, ball to shoulders, and similar exercises. The downside is that the ball can not be adjusted for weight and trains your grip less.
The
dinnie rings are more an accessory to the
power pin rather than an alternative. The
dinnie rings in combination with two pins are probably the best way to simulate the famous Scottish stone lift at home and prepare for it.
Conclusion for the Rogue power pin
The
rogue power pin is a cost and space-efficient way to mix up your deadlift and grip training if you already have the necessary plates. If you are only starting your grip strength journey you might be better off buying
pinch blocks and
cannonballs to start as you will not need Kanye’s to make them work.