Information on how to run faster, lift stronger and think deeper

TITAN Economy bumper plates vs Rogue Wagon wheel

Posted by Pascal Landshoeft

Oct 9, 2020 9:00:00 AM

TITAN Economy bumper plates vs Rogue Wagon wheel

This is a comparison between the TITAN economy bumper plates and the Rogue Wagon wheel including pros, cons, and alternatives. It was published first under which titan plates to get. Follow the links for more details.

Click for Instagram

Overview and review of the Rogue Wagon Wheel Pair

 

The Rogue Wagon wheel plates will set you back about $425. These plates are especially good to use for powerlifters who are serious about competing. This overview has originally been published in the article "Which rogue plates to buy" which you can find on this blog.

What else to consider from Rogue

Overview of the Wagon wheel plates

 
The Wagon wheel plates are a co-design between Mark Bell and Rogue. The basic idea is that a standard 45LB can be bigger than 450mm. The result is a pair of plates which have 660mm in diameter and are therefore called Wagon wheels. If you do not want to buy blocks save storage space for block pulls, this is the way to go. Specs of the wagon wheel plates:
 
  • Made in the USA
  • 0.375'' thick laser cut steel construction
  • 45LB
  • 2% Weight tolerance
  • 660mm Diameter
  • 50.80mm width
This is a specialized tool when you get serious with your powerlifting to get more volume in without wrecking your lower back. They also cost less than proper pulling blocks. If you only need blocks for powerlifting purposes, this is a great option which is easy to store in your gym.
 

Pros of the Wagon wheel plates

 
The Wagon wheel saves space and time when you want to deadlifts from a block. They also cost less than their wooden or metal blocks which fit the same purpose from Rogue. 
 

Cons of the wagon wheel plates

 
The Wagon wheel cannot be used for Olympic weightlifting style block pulls or jerking. For jerking, they are too low and for dynamic block pulls the metal is too hard on the floor and wrists of the lifter. For Olympic weightlifting, you are better off to buy proper jerk blocks.
 

Alternatives to the Wagon wheel plates

 
Alternatives to the wagon wheel are:
 
The metal jerk blocks from Rogue are adjustable in height and beasts to behold. These are space saving compared to their wooden counterparts as you do not need multiple of them to stack higher up.
 
Wooden jerk blocks take up more space in your gym than the metal blocks offer the same height options, but are in turn more modular. With one full set, several athletes can train from different starting positions. 
 

 Overview of the TITAN Economy bumper plates

This is an overview of the TITAN Economy bumper plates including pros, cons, and alternatives. It was published first under which titan plates to get. Follow the links for more details.

 

Related articles

Overview of the Titan economy plates

Price $44.99 - $474.99
 
The economy bumper plates from TITAN are the ideal weight plates to start your home gym. They are cheap and cheerful and therefore can be bought en masse or on a small budget to start a home gym. These plates are available from 10lb to 100lb with the same diameter and varying thickness. They will fit a standard Olympic barbell and most plate trees and storage solutions for plates. They are also available for purchase in a 230lband 260 lb set. The full specifications are:
 
 
Low Bounce Rate
Stainless-Steel Insert
Extremely durable
Olympic barbell size
Quieter than steel plates
Sold in pairs of 10, 15, 25, 35, 45-pounds

Diameter: 450mm / 17.75-in.
Width: 1 – 5.25-in.
Collar Opening: 50 mm
Color: Black
Material: Rubber with steel insert

10-POUNDS:
Width: 1-in.

15-POUNDS:
Width: 1.25-in.

25-POUNDS:
Width: 1.78-in.

35-POUNDS:
Width: 2.75-in.

45-POUNDS:
Width: 3.5-in.

100-POUNDS:
Width: 5.25-in.
 
If you want to start your home gym on a budget, this is where to look. You can not beat Titan on Price in many categories and this is one of them. If you are looking for plates to continuously from overhead, these might not be the ones.
 

Pros of the TITAN bumper Plates

 
The pros of the TITAN bumper plates are:
 
  • Low price
  • Outdoor / Indoor use
  • Available up to 100 pounds
  • Lower injury risk
One of the biggest pros for the entire TITAN fitness brand is its low price compared to competitors like Eleiko or Rogue. Especially on comparable plates, the Titan versions come out at almost half of the purchase price of a like for like comparison. This is especially good if you want to equip a home gym on a very low budget and want some variety in your training. With TITAN your wallet will remain intact. Commercial gyms will appreciate that you can get quite a bit of tonnage for a low price with TITAN.
 
Bumper plates themselves are practical as you can use them indoors and outdoors. They are a lot more forgiving in the heat or in damp places compared to Iron plates. If you need to build your gym in an outhouse or in a basement with unfinished walls, bumper plates are probably the better bet. In addition, you can also take them outside for a workout and leave them there without feeling too guilty about it. 
 
Another bonus is that TITAN also offers a 100lb bumper version of their plates. This is unusual as most other vendors offer this size as an Iron plate. If you lift very heavy you can use these to make it a little easier on the wrists when you bring the weight back down to the ground. Get one pair of the big bumpers on and then stack iron plates to the desired heavy load. This is a little more forgiving on your body and the floor in the long run. Apart from this, I see little use in heavy bumper plates as they take up too much space on the sleeve. 
 
Bumper plates are also less risky to handle then Iron plates. When you get your fingers between two iron plates or knock your shin/toe against them, you are usually hurt. Bumper plates give in a little more and therefore are good for beginners or when you have teenagers training in your gym. 
 

Cons of the TITAN economy  Plates

 
The cons of the TITAN bumper plates are:
 
  • Quality issues
  • Sleeve space
  • Olympic training
  • Black 
You get what you pay for and while you save quite a bit of money on the TITAN bumpers they are also more likely to break. In a commercial gym that might not be as bad, as you constantly have to renew equipment anyway, but in a home gym you might not want to have to buy your plates twice over the time of 3 years. Especially the rims where the barbells are inserted are more likely to deform than with other brands. If you do not intend to drop these, you might as well consider iron plates, which are cheaper per pound and get more weight on the barbell.
 
Bumper plates also take up more sleeve space compared to Iron plates for the same amount of weight. If you mainly train the bench press, deadlift, and squat with 400lb or more, consider getting iron plates instead of bumper plates. When you get to 400lbs it gets tight on the sleeves when you bumper plates only. 
 
These bumper plates are not ideal for Olympic weightlifting. They will do, but suffer more when dropped from overhead. This is based on the core of the plate. The core of bumper plates is made of rubber with a thin metal inlay where the barbell is inserted. Olympic plates have a metal core with rubber around it. This makes the bumper plates more likely to come apart when dropped repeatedly from overhead. Still, it will take some time until you have broken them. So if you don't go through 100 overhear lifts a week or more, I would still say you can get these plates for our once a week Oly session. 
 
The last disadvantage is that these plates are plain black. If you want some color in your life you can get the colored bumper plates from TITAN instead. Especially in a home gym scenario I always recommend this as it is just more fun than having everything in black. But I guess that is more a question of taste than anything else. 
 

Alternatives to the TITAN economy Bumper plates

 
Alternatives to the TITAN bumper plates are:
 
the elite bumper plates from TITAN are the right choice if you put in a lot of Holy lifts per week. They are built robustly and take the beating from the drops. They cost considerably more than the economy bumper plates, but they will also take a bigger beating. The only difference to real competition Olympic weightlifting plates is that they are not colored. Compared to similar options from Eleiko and Rogue you save considerably.
 
If you want a bit more color in your life you can get the color economy plates from TITAN. They only cost slightly more, have the same specs than the black ones, but come in the official color denominations for the different weights of the plates. This would be my personal choice from TITAN if I was building a gym on a budget.
 
Cast Iron plates are a good option for anyone with limited space and budget. They are not great to look at and also a bit more awkward to handle. In return, you get the clanging and banging of metal and the maximum amount of weight you could possibly put on your barbell. 
 

Conclusion for the TITAN bumper plates

 
The TITAN Economy bumper plates are a great option for anyone who wants to build a home gym on a budget. Especially if you train only three times a week and do not abuse your equipment a lot, these plates are great. In a commercial setting, these plates are great for general training where things will get knocked up anyway. If you want plates that you can drag the mud, use in the rain or extreme heat without feeling guilty., get these. If you want to impress, hold a competition, or beat the crap out of your plates, go upmarket. 

Topics: TITAN