TITAN T2 and dip vs Rogue Monster collegiate [Article, Video]

This is a comparison of the TITAN T2 power rack and the Rogue Monster collegiate rack. Follow the links for more details.

Overview and review of the Rogue Monster Collegiate Half Racks

Price: 1.160

This review was originally posted in the longer article "Which strength equipment to buy from rogue" in which you can read about 25 products of Rogue which cost more than 1.000$. The Rogue Monster collegiate racks are a good solution when you want to build along lane of racks with plates in the middle. See the details in this article.

What else to consider from Rogue

Overview of the Rogue collegiate rack

The Monster Collegiate half rack is another special purpose rack and one of the newer developments in the Rogue portfolio. You get the full benefit of the design when you opt for the double rack option. This leaves the plate storage in the middle of two training stations optimizing footprint and rack stations in a long line which can be accessed from both ends. In addition, the design makes it easy to switch between band/rope work and heavy lifts in the same session due to the prolonged sockets.

How many clients should the collegiate rack bring you?

If you think that the Rogue Monster Collegiate will bring you 4 new clients who pay you 50$ on a 1-year retainer it is worth the investment. This will yield 2.400$ net new revenue against an investment of 1.160$. Adjust the numbers for your own gym accordingly.

Pros of the collegiate rack

The Rogue Monster Collegiate is a low price option to enter the Rogue Monster Series family of Rogue. If you want to train many people in parallel this is a good option.

Cons of the collegiate rack

There are not many cons to this low price monster rack except that you do not get a full rack to train in.

Alternatives to the collegiate rack

Here are some alternatives at a price point of 1.160$ to the Collegiate rack:

1x Rogue Froning RML 4100C Power rack

With this rack, you get a nice full rack with special branding at a slightöly lower price than the collegiate rack. This can be a good option when you want more space inside the rack to do your workouts.

1x Rogue RML 490C Power rack

This is an option that leaves you with a full rack and the option to choose your color. The disadvantage is that you get the Monster LIte to make instead of the Monster base for your rack.

Conclusion

If you want a rack that is not too expensive and can be used inside and outside a rack for band work, this is the one to go for. It is also a good option when you have limited space and want o make maximum use of your setup.

Overview and review of the T2 and dip

The TITAN T2 and dip will put you back about $300 - $350. TITAN is well known for their very good prices compared to their competition and will get you started on your home gym. This review was originally posted in “which Titan rack to buy for under $500”

Overview of the T2 and dip

The T2 comes with 2x2 steel tubes and distinguished itself from the X2 line by having fewer extras straight out of the box. You will have fewer pull-up bars and less convenience on the uprights. The money saved for this can be put towards a bench as in this package. This version also includes a dip installment at the front. The features and specifics of this package are:

Rack details:

Capacity: 700 lbs
1" round steel j-hooks
T-2 Series (2"x2" steel tubes)
Package includes 1 pair of dip bars
Chin up bar: 1 1/4" diameter
Installation instructions
Weight: 107 lb
Height: 83"
Height of pull up bar: 80"
Opening: 44"
Depth: 48"
Inside front to back bar: 26"
Floor space: 48" x 48"
Material: Steel

The main difference to most other is the included dip bars.

Pros of the T2 dip bar

The price of the T2 is one of its main pros. You will be hard-pressed to find as much metal for a rack including a dip bar for the same price in the market. Especially if it is new.

Cons of the T2 dip bar

The dip bar can obstruct access to the rack itself. You will also not be able to use the front to have two athletes squat in parallel on the same rack. This might not be ideal, especially in high school and college setups strapped for cash.

Alternatives to the T2 dip bar

T3 fold back rack
X2 and incline combo

The T3 uses a folding concept but with 2x3 steel tubes to be stored against the wall when you don’t use it.

The X2 is one of the cheapest series in the TITAN line up. With its 2x2 steel tubes, it uses the least material to build a rack. If you want to downsize on all ends to fit a bench and rack into $500 budget comfortably, this is for you.

Summary of the T2 dip bar

If you care about a dip bar, this is the rack. Otherwise, you might as well save the money for more plates or a bench.