REP fitness black bumper plates vs TITAN economy bumper plates

This is a comparison between the REP fitness black bumper plates and the TITAN economy bumper plates. Follow the links for more details.

Overview of the TITAN Economy bumper plates

This is an overview of the TITAN Economy bumper plates including pros, cons, and alternatives. It was published first under which titan plates to get. Follow the links for more details.

Overview of the Titan economy plates

Price $44.99 - $474.99

The economy bumper plates from TITAN are the ideal weight plates to start your home gym. They are cheap and cheerful and therefore can be bought en masse or on a small budget to start a home gym. These plates are available from 10lb to 100lb with the same diameter and varying thickness. They will fit a standard Olympic barbell and most plate trees and storage solutions for plates. They are also available for purchase in a 230lband 260 lb set. The full specifications are:

Low Bounce Rate
Stainless-Steel Insert
Extremely durable
Olympic barbell size
Quieter than steel plates
Sold in pairs of 10, 15, 25, 35, 45-pounds

Diameter: 450mm / 17.75-in.
Width: 1 – 5.25-in.
Collar Opening: 50 mm
Color: Black
Material: Rubber with steel insert

10-POUNDS:
Width: 1-in.

15-POUNDS:
Width: 1.25-in.

25-POUNDS:
Width: 1.78-in.

35-POUNDS:
Width: 2.75-in.

45-POUNDS:
Width: 3.5-in.

100-POUNDS:
Width: 5.25-in.

If you want to start your home gym on a budget, this is where to look. You can not beat Titan on Price in many categories and this is one of them. If you are looking for plates to continuously from overhead, these might not be the ones.

Pros of the TITAN bumper Plates

The pros of the TITAN bumper plates are:

Low price
Outdoor / Indoor use
Available up to 100 pounds
Lower injury risk

One of the biggest pros for the entire TITAN fitness brand is its low price compared to competitors like Eleiko or Rogue. Especially on comparable plates, the Titan versions come out at almost half of the purchase price of a like for like comparison. This is especially good if you want to equip a home gym on a very low budget and want some variety in your training. With TITAN your wallet will remain intact. Commercial gyms will appreciate that you can get quite a bit of tonnage for a low price with TITAN.

Bumper plates themselves are practical as you can use them indoors and outdoors. They are a lot more forgiving in the heat or in damp places compared to Iron plates. If you need to build your gym in an outhouse or in a basement with unfinished walls, bumper plates are probably the better bet. In addition, you can also take them outside for a workout and leave them there without feeling too guilty about it.

Another bonus is that TITAN also offers a 100lb bumper version of their plates. This is unusual as most other vendors offer this size as an Iron plate. If you lift very heavy you can use these to make it a little easier on the wrists when you bring the weight back down to the ground. Get one pair of the big bumpers on and then stack iron plates to the desired heavy load. This is a little more forgiving on your body and the floor in the long run. Apart from this, I see little use in heavy bumper plates as they take up too much space on the sleeve.

Bumper plates are also less risky to handle then Iron plates. When you get your fingers between two iron plates or knock your shin/toe against them, you are usually hurt. Bumper plates give in a little more and therefore are good for beginners or when you have teenagers training in your gym.

Cons of the TITAN economy Plates

The cons of the TITAN bumper plates are:

Quality issues
Sleeve space
Olympic training
Black

You get what you pay for and while you save quite a bit of money on the TITAN bumpers they are also more likely to break. In a commercial gym that might not be as bad, as you constantly have to renew equipment anyway, but in a home gym you might not want to have to buy your plates twice over the time of 3 years. Especially the rims where the barbells are inserted are more likely to deform than with other brands. If you do not intend to drop these, you might as well consider iron plates, which are cheaper per pound and get more weight on the barbell.

Bumper plates also take up more sleeve space compared to Iron plates for the same amount of weight. If you mainly train the bench press, deadlift, and squat with 400lb or more, consider getting iron plates instead of bumper plates. When you get to 400lbs it gets tight on the sleeves when you bumper plates only.

These bumper plates are not ideal for Olympic weightlifting. They will do, but suffer more when dropped from overhead. This is based on the core of the plate. The core of bumper plates is made of rubber with a thin metal inlay where the barbell is inserted. Olympic plates have a metal core with rubber around it. This makes the bumper plates more likely to come apart when dropped repeatedly from overhead. Still, it will take some time until you have broken them. So if you don't go through 100 overhear lifts a week or more, I would still say you can get these plates for our once a week Oly session.

The last disadvantage is that these plates are plain black. If you want some color in your life you can get the colored bumper plates from TITAN instead. Especially in a home gym scenario I always recommend this as it is just more fun than having everything in black. But I guess that is more a question of taste than anything else.

Alternatives to the TITAN economy Bumper plates

Alternatives to the TITAN bumper plates are:

the elite bumper plates from TITAN are the right choice if you put in a lot of Holy lifts per week. They are built robustly and take the beating from the drops. They cost considerably more than the economy bumper plates, but they will also take a bigger beating. The only difference to real competition Olympic weightlifting plates is that they are not colored. Compared to similar options from Eleiko and Rogue you save considerably.

If you want a bit more color in your life you can get the color economy plates from TITAN. They only cost slightly more, have the same specs than the black ones, but come in the official color denominations for the different weights of the plates. This would be my personal choice from TITAN if I was building a gym on a budget.

Cast Iron plates are a good option for anyone with limited space and budget. They are not great to look at and also a bit more awkward to handle. In return, you get the clanging and banging of metal and the maximum amount of weight you could possibly put on your barbell.

Conclusion for the TITAN bumper plates

The TITAN Economy bumper plates are a great option for anyone who wants to build a home gym on a budget. Especially if you train only three times a week and do not abuse your equipment a lot, these plates are great. In a commercial setting, these plates are great for general training where things will get knocked up anyway. If you want plates that you can drag the mud, use in the rain or extreme heat without feeling guilty., get these. If you want to impress, hold a competition, or beat the crap out of your plates, go upmarket.

Overview and review of the REP fitness black bumper plates

This is an overview of the REP fitness black bumper plates including pros, cons, and alternatives. The original was published under which plates to buy from rep fitness. Follow the links for more details.

REP Black Bumper plates $49

The REP black bumper plates are the standard option you can find from most vendors around. These plates have a good price per plate, can be used outdoors, and fit on most barbells. This is the workhorse plate for the home or in a commercial gym. If you are not sure what to buy, you can not go wrong with these. The full specifications are:

160 lb - (2)Each 45-25-10
190 lb - (2)Each 45-25-15-10
210 lb - (2)Each 45-35-25
230 lb - (2)Each 45-35-25-10
250 lb - (4) 45 (2) Each 25-10
260 lb - (2)Each 45-35-25-15-10
370 lb - (6) 45 lb & (2)Each 25-15-10
Superior craftsmanship and design. Steel inserts with hooks molded into the bumper plates increase durability versus older designs with brass inserts.
Extra thick 10 lb plates are the best on the market, and highly resistant to bending
Low bounce. Some recycled rubber bumper plates will bounce very high and make you chase the bar around. Not ours.
Thin profile. With a good Olympic bar, you can fit 515lbs of our bumper plates on the bar.
Factory tested to withstand over 12,000 drops from a height of 8 ft.
Used in both commercial and home gyms all over the world
3% Tolerance

Solid plates for any use scenario. Not too expensive and not too cheap to get you where you want to go with your fitness.

Pros of the REP Black Bumper plates

Pros of the REP Black bumper plates are:

Value for money
Goes with anything
Can be used outdoors
Very forgiving on the user
Very forgiving on the floor

Black bumper plates are always a safe bet. Especially for someone who is not incredibly strong or wants to break world records. They are reliable. If Black bumper plates get dirty it is not that bad, as the dirt will not show up as much on the black. A decent black color also goes with most other equipment in any given gym as it is often black or grey.

Bumper plates are also good as they can be dropped from overhead without damaging the plates, the lifter, floor, or equipment. Bumper plates are very forgiving and ideal for any beginner or intermediate lifter. They can also be used outdoors as they take better to rain and sand than other, pricier plates.

Cons of the REP Black Bumper plates

Cons of the REP black bumper plates are:

Sleeve space
High bounce
Can get very hot
Balance
Can be awkward to pick up
Higher fault tolerance

The biggest con of bumper plates is that they take up more space than iron and competition plates on the barbell. If you lift very heavy regular bumper plates usually max out the sleeves of the barbell somewhere around 180kg to 220kg depending on how you stack the plates. If you are a serious powerlifter or want to save storage space in your commercial gym you are better off getting iron plates.

If you use these plates mainly for Olympic lifting you have to keep in mind that they are louder and bounce more than competition plates. If you want to get through a proper snatch workout in the least amount of time that can actually be quite annoying. A minor thing, but still worth considering.

These plates are also balanced differently compared to competition plates. As they have no metal core ring they spin differently during Olympic lifts than bumper plates. A good lifter will still lift heavy weight with these, but if you are entering micro differences you might want to for the competition plates instead.

As they are black rubber they might not be the ideal plates to be used outdoors in a very hot climate. Again, something minor, but if you burn your hand on a very hot bumper once you know what I am talking about. Higher quality plates take a little better to heat and do not absorb it as fast. Different color also helps.

These bumper plates have a higher fault tolerance than the competition and precision plates. This means it is more likely that the plate you are getting does not exactly weigh what it says on the plate. Calibrated plates are the best way to remedy this. Here the plates are weighed at the end of the production process and then adjusted with a little metal insert to be as precise as possible. This production step also makes them more expensive than bumpers or regular iron plates.

Alternatives to the REP Black Bumper plates

Alternatives to the REP BUmper plates are:

If you want something a bit more precise and with a color you can also get the REP competition plates. These plates are made to competition specifications and are therefore produced with a lower tolerance rate. They also have a little lip which makes them easier to pick up from the ground.

The REP-colored bumper plates are a good alternative if you want color in your life instead of simple black. The nice thing is that they are very close in price to the regular black bumper plates.

The Rogue fleck plates are a nice hybrid between black rubber plates and colored plates. The black plates are being infused with color during the production process to make them look like checkered animals. If you want your gym to be hip and different, this is the plate to make that statement without reaching into the Avengers or food-themed weight plates.

Rogue's machined iron plates are a good option for someone who wants precise iron plates for their ambitious home gym. These are a particularly good choice for any powerlifters that need to stack a lot of iron on the plate to still make gains.

The TITAN bumper plates are the cheap version between Rogue, REP, and TITAN if you want to get the most weight for your buck from a decent vendor, then TITAN is the way to go.

Conclusion for the REP Black Bumper plates

The rep black bumper plates are a solid choice when you are confused and just want to get going. They are also a good choice for a commercial gym that wants to play things safe.