REP fitness color bumper plates vs TITAN wagon wheels

This is a comparison between the REP fitness black bumper plates and the TITAN wagon wheels. Follow the links for more details.

Overview and review of the TITAN wagon wheels

This is an overview of the TITAN Wagon wheels including pros, cons, and alternatives. It was published first under which titan plates to get. Follow the links for more details.

Overview of the TITAN Wagon wheel

Price: $223.99

The Wagon wheel is an idea that I have first seen from Mark Bell who has perfected it with Rogue. TITAN than adopted it for its own portfolio. The idea is to have a deadlift pulling block that is easy to store and also easier to use. Pulling blocks can be tricky, especially for deadlifts. They are cumbersome to set up, have a single purpose use, and eat up quite a bit of space in your gym. The wagon wheels to take care of most of these problems. The full specifications are:

A great substitute for pulling blocks, Titan’s Wagon Wheel Pulling Blocks are larger in diameter (26”) than your standard Bumper Plates allowing for a partial range of motion deadlifts.
Makes loading and unloading your barbell a breeze without the need for a jack or wedge.
Perfect for taller athletes or powerlifters that are suffering from knee and lower back issues.
2” collar opening makes Titan’s Wagon Wheel Pulling Blocks compatible with most standard Olympic barbells.
Titan Laser Cut Logo.

Weight: 45 LB Each | 90 LB Total
Diameter: 26”
Wheel width: 2”
Black Powder Coat
Sold in Pairs!

This is a good option if you have been deadlifting for a long time and need to get a lot of volume in without wrecking your back. It can also be used for block pulls that are often part of more advanced powerlifting programs to address weak points in the deadlift.

Pros of the TITAN wagon wheel

Pros of the TITAN wagon wheel are

Price
Easy to store and handle
Same weight as regular 45lb plates

As with all TITAN products, the price is very attractive. If you want to get wagon wheels for the lowest price possible TITAN is probably a good bet. However, undercutting the competition by half usually comes with some corner-cutting on labor. TITAN products usually show this in the finish of their coating and/or their welds. That is nothing that keeps you from training, it is just disappointing when you buy something new and the finish is not perfect. Still, something has to fall short if you save yourself half the money.

Compared to pulling blocks these are easier to store and to handle. You can lean them against a wall which makes their footprint in the gym quite small. They will not fit on most plate trees or storage pins on a rack due to their bigger diameter. For the deadlifts themselves, they are also great as you do not have to worry too much about hitting the blocks on the way down. Attaching them to the bar is a lot easier than finding the right spacing between two blocks.

Another bonus is that they are almost the same weight as a regular 45lb bumper or cast iron plate. With this, you do not mess too much with the weight distribution and the dynamic of your usual pulls in terms of symmetrical load.

Cons of the TITAN wagon wheel

Cons of the TITAN wagon wheel are:

Inconsistent finish
Can not be adjusted in height
Not great for drops

You will usually find more reports about inconsistent finishes on the coating and welds of TITAN fitness than you will for Eleiko or Rogue. That is not the end of your world for your training but can be annoying when you decide to buy something new rather than used. With TITAN you save money but also take a little more of a gamble with getting something delivered that is not perfect. It happens on Rogue deliveries too, but it is less common.

Wagon wheels themselves have one big disadvantage compared to good quality pulling blocks. They can not be adjusted in height. A pair of good quality pulling blocks usually costs between $500 - $1000. These can usually be adjusted in height which makes some more user friendly when you have a lot of different athletes using them for different purposes. These can be hip belt squats, box jumps, or block jerks.

If you would like to do Olympic weightlifting partials with blocks, the wagon wheels are not an option. Dropping them from a height will damage the floor, barbell, and the wagon wheels themselves. If you are looking for a more versatile tool for partial lifts, adjustable blocks are the way to go.

Alternatives to the TITAN wagon wheel

Alternatives to the TITAN Wagon wheel are:

TITAN adjustable metal blocks
TITAN wood jerk blocks

The Titan adjustable metal blocks are an alternative to the wagon wheels which are slightly more expensive. For about $100 more you get a tool that will eat up more space in the gym but has a lot more applications. This is the better buy for a commercial gym that has a lot of floor space and wants their equipment to do more than one thing. These blocks are still not for Olympic weightlifting as they do not go high enough to start training from the front rack position.

Titan wood jerk blocks come in at $999 and for this, you get 3 pairs of blocks in various heights. If I was a professional gym owner looking into blocks for partial lifts i would bite the bullet and get these. They are good quality and apply to many of the partial movements required to address weaknesses in the Olympic lifts. If you all you care about is your deadlift performance, these are overkill.

Conclusion for the TITAN wagon wheel

The TITAN wagon wheels area good tool especially for home gym powerlifters who want to vary their training or give their backs a break. As this is a very specialized tool, it will probably not one of the first purchases for your home gym and especially is not essential. Prioritize change plates over wagon wheels any day. A professional gym might consider there jerk blocks instead of the adjustable metal blocks or wagon wheels. Especially if you have quite a bit of floor space. The wooden blocks are the best for dropping the barbell on without it jumping all over the place.

Overview and review of the REP fitness color bumper plates

This is an overview of the REP fitness color bumper plates including pros, cons, and alternatives. The original was published under which plates to buy from rep fitness. Follow the links for more details.

REP color bumper plates $49

The REP color bumper plates are a colored option of the REP black bumper plates. What I like about these bumpers is that they are affordable and very close in price to the standard black. If you are torn between black and colored bumpers for the same price I definitely recommend going for the colored ones. Way more fun to train with. The full specifications are:

Plate Sets:

160 lb - (2)Each 45-25-10
210 lb - (2)Each 45-35-25
230 lb - (2)Each 45-35-25-10
260 lb - (2)Each 45-35-25-15-10
370 lb - (2)Each 55-45-35-25-15-10

10 lb - Gray
15 lb - Black (from our regular black plates)
25 lb - Green
35 lb - Yellow
45 lb - Blue
55 lb - Red

A very affordable way to get colored plates into your home gym as other options might break the budget.

Pros of the REP color bumper plates

Pros of the REP color bumper plates:

Price
Color
Very forgiving
Can be used outdoors

The best thing about the REP-colored bumper plates is the decision of REP to not charge you a lot extra if you prefer color over black. That is great as other vendors go for a different policy on this one or do not even stock anything but black plates. So if you want colored plates on a budget, then these are a good choice.

Bumper plates are very forgiving on the lifter, floor, and equipment. They are the least likely to injure someone or cut into the floor and rack you are using. If you have a lot of beginners around or do not know who and how the plates will be used at all times, try stocking more bumpers than iron plates. Iron is great, but it is a lot easier to hurt yourself with these plates.

The last bonus of these plates as that they can be used outdoors. They won't deform and if they get dirty they are easy to clean.

Cons of the REP color bumper plates

The cons of the REP colored bumper plates are:

Price compared to iron
Sleeve space
High bounce
Stain easier
Suboptimal for oly lifts
Can be awkward to pick up

The main con for bumper plates is that they take up more sleeve space than iron plates. They are usually also a little more expensive than Iron plates per kilogram. With bumper plates, you usually max out the barbell somewhere around 180kg - 220kg depending on the barbell you use and how you stack the plates. If you are a serious powerlifter that regularly works with 200kg or more you need iron plates. But if you are shopping for plates as a powerlifter, you probably are already well aware of that as you did not step into the gym yesterday.

These bumper plates have a higher bounce than specific competition plates. If you are only lifting a lot, especially heavy, this can become annoying. Again, if you are an experienced OLy lifter you will know how to handle a bouncing bar, but it would be beneficial if it did a little less of that when you do 100s and 1000s of reps. In that case, get plates with a low bounce that usually cost a little more like the REP sports plates or competition plates.

Colored plates pick up blemishes and stains more than simple black plates. If you do not want to have to clean your plates as often to keep them looking nice then black plates are the better choice.

As these plates do not have a metal core they tend to spin a little more in an unpredictable way for oly lifts or not at all. That can mess with the dynamic of an oly lift and lead to lower lifts. However, this is minor and only relevant to top athletes.

Bumper plates are generally a little more awkward to pick up from the floor than iron plates as you get less grip. Some bumper plates have an added little lip to get grip on which these do not provide. Again minor, but we like to split hairs here.

Alternatives to the REP color bumper plates

Alternatives to the REP bumper plates are:

If you want to play it safe, especially for a commercial gym, then you can also get a stack of black bumper plates. Not everyone likes to train with colored plates, even though I think they are the best thing since sliced bread.

If you want to take it up a notch you can get the REP competition bumpers instead. They will have a lower bounce and weight tolerance and are therefore more precise instruments than the colored bumpers. They also have a metal core which makes them more centered during oly lifts. The big con is that they can cost up to triple what a single bumper plate costs.

Rogue fitness also offers a line of colored bumper plates if you are leaning more towards equipping your gym Rogue themed. These plates are also imported so the patriotism card does not apply as much as with some other products from Rogue. If you want to go for American-made plates you can order the Rogue deep-dish plates.

The machined iron plates are high precision iron plates from Rogue with a lower tolerance compared to regular iron plates. This means you pay a little extra so that these plates are being produced with lower fault tolerance to weigh exactly what it states in the plate.

The TITAN color bumpers are a low-budget option. Especially if you want to build your entire gym as cheap as possible without ransacking Facebook groups and Craigslist you should pay TITAN a visit.

Conclusion for the REP color bumper plates

These are a good option to get color in our home or commercial gym at a reasonable price if you want to.